journal article·2018-11

Durability of dry-mix shotcrete using supplementary cementitious materials

Julie Armengaud, Martin Cyr, Géraldine Casaux-Ginestet, Bernard Husson

Publisher page

Abstract

Abstract Dry-mix shotcrete has all the components of concrete but its particular placement technique makes it harder to study than ordinary concrete. Its durability has not been the subject of much analysis and the aim of this paper is to bring new insights in that field. This work focuses especially on the durability of dry-mix shotcrete containing supplementary cementitious materials (SCM) with different aggregate size distributions. The use of SCM in dry-mix shotcrete aims at limiting rebound, reducing the carbon footprint of the binder and enhancing durability. The durability indicators introduced in this work are related to compressive strength, porosity, gas permeability, and chloride migration. Laboratory and on-site tests were carried out. It appears that, despite the high porosity (due to the adopted aggregate-size distribution characterized by very fine particles), shotcrete compressive strength, permeability and chloride penetration resistance are equivalent to or better than those of ordinary concrete. Additionally, this study underlines the limits of a prescriptive approach for achieving a given performance level, as dry-mix shotcrete is defined by its components as well as by its setup (water and final binder contents are very dependent on the nozzelman’s adjustments). In these conditions, the performance-based approach seems more appropriate, even if a large data-base on the properties of dry-mix shotcrete (porosity included) is required. Extending the data-base on dry-mix shotcrete is, therefore, among the expected contribution of this research project.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Armengaud · 2016
2. ACI Committee 506, Specification for Shotcrete (ACI 506.2-95), 2008, pp. 1–8.
3. Rebound in dry-mix shotcrete
4. Rheology and rebound behaviour of dry-mix shotcrete10.1016/S0008-8846(01)00614-7 ↗
5. Effect of particle density on its rebound in dry-mix shotcrete10.1061/(ASCE)0899-1561(2009)21:2(58) ↗
6. Jolin · 1999
7. Effects of particle-size distribution in dry process shotcrete
8. Shotcrete durability: an evaluation
9. Durability of dry-mix shotcrete
10. Durability of dry-mix shotcrete containing rapid-set accelerators
11. Mechanical properties, permeability and durability of accelerated shotcrete10.1016/j.conbuildmat.2015.07.148 ↗
12. Comparative evaluation of transport properties of shotcrete compared to cast-in-place concrete
13. AFGC, Conception des bétons pour une durée de vie donnée des ouvrages, 2004.
14. Characterization of fresh dry-mix shotcrete and correlation to rebound10.1016/j.conbuildmat.2016.12.220 ↗
15. NT Build 492: concrete, mortar and cement-based repair materials: chloride migration coefficient from non-steady state migration experiments
16. Mechanics of aggregate rebound in shotcrete – (Part I)10.1007/BF02486470 ↗
17. Characteristics and applications of flash metakaolins10.1016/j.clay.2013.08.036 ↗
18. Hang · 2015
19. Armelin · 1997
20. Influence of supplementary cementitious materials (SCMs) on concrete durability
21. D.R. Morgan, N. McAskill, J. Neill, N.F. Duke, Evaluation of silica fume shotcrete, in: Proc. International Workshop on Condensed Silica Fume in Concrete, 1987, p. 34.
22. San Nicolas · 2011
23. Bucher · 2015
24. Gérômey · 2003
25. Bucher · 2015
26. Rebound in dry-mix shotcrete: Influence of type of mineral admixture
27. Bolduc · 2009
28. Shotcrete boiled water absorption
29. G. Hermida, Influence du volume de pâte et de la concentration en ciment sur la performance du béton: vers le développement d’un béton à contenu minimal en pâte,” Cachan, 2008.
30. Evaluation of durability characteristics of high performance shotcrete using fly ash10.4334/JKCI.2010.22.3.305 ↗
31. M. Zadeh, G. Debicki, P. Clastres, Y. Billard, Influence of silica fume on permeability of concrete to oxygen for temperatures up to 500°C, in: 6th CANMET/ACI/JCI Conf : Fly Ash, Silica Fume, Slag & Natural Pozzolans SP 178, 1998, pp. 975–996.
32. V. Batrakov, S. Kaprielov, S. AV, Influence of different types of silica fume having varying silica content on the microstructure and properties of concrete, in: 4th Intl Conf ACI : Fly Ash, Silica Fume, Slag & Natural Pozzolans, 1992, pp. 943–964.
33. Evaluation of chloride-penetration resistance of metakaolin concrete by means of a diffusion – binding model and of the k-value concept10.1016/j.cemconcomp.2015.07.012 ↗
34. The effect of supplementary cementitious materials on chloride binding in hardened cement paste10.1016/j.cemconres.2011.01.001 ↗
35. Mechanism of Friedel’s salt formation in cements rich in tri-calcium aluminate10.1016/S0008-8846(96)85009-5 ↗
36. Comparison of ASTM saturation techniques for measuring the permeable porosity of concrete10.1016/j.cemconres.2004.09.017 ↗