journal article·2019-03

Research on the resistance to saline soil erosion of high-volume mineral admixture steam-cured concrete

Zhuang Shiyu, Wang Qiang, Zhou Yuqi

Publisher page

Abstract

Abstract The reasonable steam curing regime and the resistance to saline soil erosion of high-volume fly ash steam-cured concrete, high-volume ordinary slag steam-cured concrete and high-volume ultra-fine slag steam-cured concrete were studied by determining the demoulding strength, reaction degree, strength development law, chloride ion permeability, connected porosity, and sulfate attack resistance. The results show that although high-volume fly ash steam-cured concrete with the ideal demoulding strength and good resistance to chloride ion permeability can be obtained via properly reducing water-binder ratio and simultaneously prolonging steam curing time, its later-age strength development and the resistance to sulfate attack are not significantly improved compared with plain cement steam-cured concrete. High-volume ordinary slag steam-cured concrete with both ideal demoulding strength and great strength development at later ages can be obtained via only appropriately prolonging the steam curing time. Ordinary slag tends to enhance the saline soil resistance of steam-cured concrete more significantly than fly ash. High-volume ultra-fine slag steam-cured concrete with the ideal demoulding strength and good resistance to chloride ion permeability and sulfate attack can be obtained without or via slightly prolonging the steam curing time. But ultra-fine slag does not have a better effect on the later-age performance of steam-cured concrete than ordinary slag. Compared with high-volume fly ash or ordinary slag steam-cured concrete with similar demoulding strengths, high-volume ultra-fine slag steam-cured concrete has the better resistance to saline soil erosion.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Durability of low-calcium fly ash based geopolymer concrete culvert in a saline environment10.1016/j.cemconres.2017.07.010 ↗
2. Corrosion-inhibition and compressive-strength performance of Phyllanthus muellerianus and triethanolamine on steel-reinforced concrete immersed in saline/marine simulating-environment10.1016/j.egypro.2017.07.130 ↗
3. Influence of sulfate ion and associated cation type on steel reinforcement corrosion in concrete powder aqueous solution in the presence of chloride ions10.1016/j.cemconres.2016.10.008 ↗
4. Chloride threshold value to initiate reinforcement corrosion in simulated concrete pore solutions: the influence of surface finishing and pH10.1016/j.conbuildmat.2017.03.004 ↗
5. 3D simulation of localized steel corrosion in chloride contaminated reinforced concrete10.1016/j.conbuildmat.2014.09.030 ↗
6. Does concrete suffer sulfate salt weathering10.1016/j.conbuildmat.2014.06.011 ↗
7. Sulfate transfer through concrete: migration and diffusion results10.1016/j.cemconcomp.2011.05.001 ↗
8. Thaumasite formation and deterioration in historic buildings10.1016/S0958-9465(98)00044-4 ↗
9. The confused world of sulfate attack on concrete10.1016/j.cemconres.2004.04.004 ↗
10. Sulfate attack research – whither now10.1016/S0008-8846(01)00510-5 ↗
11. Sulfate attack on alkali-activated slag concrete10.1016/S0008-8846(01)00659-7 ↗
12. Sulfate resistance of ferrochrome slag based geopolymer concrete10.1016/j.ceramint.2015.09.058 ↗
13. An accelerated sulfate resistance test for concrete10.1617/s11527-015-0731-2 ↗
14. Studying thaumasite sulfate attack using compressive strength and ultrasonic pulse velocity10.1617/s11527-015-0777-1 ↗
15. Investigation of concrete exposed to dual sulfate attack10.1016/j.cemconres.2014.06.002 ↗
16. Effect of limestone powder and fly ash on magnesium sulfate resistance of mortar10.1007/s11595-010-0074-3 ↗
17. Influence of curing regimes on mechanical properties of magnesium oxychloride cement-based composites10.1016/j.conbuildmat.2015.10.205 ↗
18. Influence of fly ash and curing on cracking behavior of concrete by acoustic emission technique10.1016/j.conbuildmat.2013.03.041 ↗
19. Effect of curing time on granulated blast-furnace slag cement mortars carbonation10.1016/j.cemconcomp.2018.04.006 ↗
20. Influence of the initial moist curing time on the sulfate attack resistance of concretes with different binders10.1016/j.conbuildmat.2017.03.235 ↗
21. Corrosion behavior of steel submitted to chloride and sulphate ions in simulated concrete pore solution10.1016/j.conbuildmat.2016.03.213 ↗
22. Effect of initial curing on chloride ingress and corrosion resistance characteristics of concretes made with plain and blended cements10.1016/j.buildenv.2006.07.008 ↗
23. Effect of initial water-curing period and curing condition on the properties of self-compacting concrete10.1016/j.matdes.2011.09.053 ↗
24. Effect of curing methods on shrinkage and corrosion resistance of concrete10.1016/j.conbuildmat.2012.12.064 ↗
25. Effect of curing methods on strength and durability of concrete under hot weather conditions10.1016/j.cemconcomp.2013.04.008 ↗
26. Effect of initial curing on chloride diffusion in concrete repair materials10.1016/S0008-8846(99)00130-1 ↗
27. The mechanical characteristics of steam-cured high strength concrete incorporating with lightweight aggregate10.1016/j.conbuildmat.2016.12.171 ↗
28. The microstructure and mechanical properties of blended cements hydrated at various temperatures10.1016/S0008-8846(01)00471-9 ↗
29. Hydration structure, and properties of blast-furnace slag cements, mortars, and concrete
30. Early strength development of Portland and slag cement concretes cured at elevated-temperatures
31. Effect of temperature and aging on the mechanical properties of concrete – Part I. Experimental results10.1016/S0008-8846(02)00744-5 ↗
32. Backscattered electron imaging of cement pastes cured at elevated-temperatures10.1016/0008-8846(95)00051-D ↗
33. Effect of temperature on the pore solution, microstructure and hydration products of Portland cement pastes10.1016/j.cemconres.2006.11.016 ↗
34. Optimum heat treatment cycle for cements of different type and composition10.1016/S0008-8846(98)00134-3 ↗
35. Steam-cured concrete incorporating mineral admixtures10.1016/S0008-8846(02)01028-1 ↗
36. Influence of steam curing on the compressive strength of concrete containing supplementary cementing materials10.1016/j.cemconres.2004.05.044 ↗
37. Effect of steam curing on class C high-volume fly ash concrete mixtures10.1016/j.cemconres.2004.08.011 ↗
38. Comparison of the properties between high-volume fly ash concrete and high-volume steel slag concrete under temperature matching curing condition10.1016/j.conbuildmat.2015.08.134 ↗
39. Influence of mineral admixtures on the short and long-term performance of steam-cured concrete10.1016/j.egypro.2012.01.134 ↗
40. Influence of initial steam curing and different types of mineral additives on mechanical and durability properties of self-compacting concrete10.1016/j.conbuildmat.2014.09.072 ↗
41. Experimental investigation on the autogenous shrinkage of steam cured ultra-high performance concrete10.1016/j.conbuildmat.2017.11.172 ↗
42. Durability of steam-cured concrete with slag under the combined deterioration of freeze-thaw cycles and de-icing chemicals10.1002/suco.201500201 ↗
43. Evaluation of sulfate resistance of slag contained concrete under steam curing10.1016/j.conbuildmat.2018.11.073 ↗
44. Premature concrete deterioration in Texas department of transportation precast elements
45. Influence of the storage conditions in the dimensional changes of heat-cured mortars10.1016/S0008-8846(01)00480-X ↗
46. Effect of curing conditions and concrete mix design on the expansion generated by delayed ettringite formation10.1617/s11527-006-9163-3 ↗
47. Influence of pre-curing time on the hydration of binder and the properties of concrete under steam curing condition10.1007/s10973-014-4053-3 ↗
48. Comparative study of reaction degree of mineral admixture by selective dissolution and image analysis10.1016/j.conbuildmat.2016.03.221 ↗
49. Methods for determination of degree of reaction of slag in blended cement pastes10.1016/j.cemconres.2011.11.010 ↗
50. Quantification of the degree of reaction of fly ash10.1016/j.cemconres.2010.07.004 ↗
51. Selective dissolution of hydrated blast furnace slag cements10.1016/0008-8846(87)90110-4 ↗
52. Apply 29Si, 27Al MAS NMR and selective dissolution in identifying the reaction degree of alkali activated slag-fly ash composites10.1016/j.ceramint.2017.06.108 ↗
53. Hydration heat of slag or fly ash in the composite binder at different temperatures10.1016/j.tca.2017.07.002 ↗
54. Effect of fineness and replacement ratio of ground fly ash on properties of blended cement mortar10.1016/j.conbuildmat.2018.05.060 ↗
55. Properties of sustainable concrete containing fly ash, slag and recycled concrete aggregate10.1016/j.conbuildmat.2009.02.011 ↗
56. Performance of granulated foam glass concrete10.1016/j.conbuildmat.2011.07.023 ↗