Sustainable lean concrete mixes containing wastes originating from roads and industries
Source abstract
Abstract
Abstract Scarcity of natural aggregates and illegal dumping of wastes originating from roads and industries are the major challenges for a developing country. The present study is an effort to provide a sustainable solution to the aforementioned challenges by utilizing these wastes for production of subbase course of concrete pavements. In the study, the optimum proportion of reclaimed asphalt pavement (RAP) along with the optimum proportion of the various supplementary cementitious admixtures (SCM) such as flyash (FA), silica fume (SF) and sugarcane bagasse ash (BA) have been evaluated for productions of dry lean concrete (DLC) mixes. The effect of the higher amount of Portland cement on the properties of RAP inclusive DLC mixes was also investigated. It was observed that the hardened properties of DLC containing RAP are mostly depended upon the maximum dry density of the fresh mixtures. Inclusions of considered industrial waste, as part replacement of Portland cement, were found to have an insignificant effect, whereas, when included in excess of cement, enhanced the properties of RAP-DLC blends significantly. The results of the study depicted that the suitability of RAP aggregates for DLC subbase may be increased by increasing the cement content by about 50%, whereas, for achieving the comparable performance to that of DLC containing natural aggregates, the quantity of cement shall be doubled. Based on the results of different parts of the study, it is recommended to include at least 30% extra cement content with either of 10% SF or 20% FA for sustainable DLC mixtures containing 75% coarse RAP aggregates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Innovative concrete reinforcement materials · Infrastructure Maintenance and Monitoring
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Sustainable construction with repurposed materials in the context of a civil engineering–architecture collaboration10.1016/j.jclepro.2013.12.018 ↗
2. An economical processing technique to improve RAP inclusive concrete properties10.1016/j.conbuildmat.2017.05.030 ↗
3. Engineering and environmental assessment of recycled construction and demolition materials used with geotextile for permeable pavements10.1061/(ASCE)EE.1943-7870.0000941 ↗
4. Feasibility study of RAP aggregates in cement concrete pavements10.1080/14680629.2017.1380071 ↗
5. Influence of water-reducing admixtures on the mechanical performance of recycled concrete10.1016/j.jclepro.2013.06.022 ↗
6. Characterization of pervious concrete with blended natural aggregate and recycled concrete aggregates10.1016/j.jclepro.2018.01.205 ↗
7. Potential use of brick waste as alternate concrete-making materials: a review10.1016/j.jclepro.2018.05.193 ↗
8. A comprehensive review on mechanical and durability properties of cement-based materials containing waste recycled glass10.1016/j.jclepro.2018.07.095 ↗
9. Combined use of sewage sludge ash and recycled glass cullet for the production of concrete blocks10.1016/j.jclepro.2017.10.140 ↗
10. Evaluation of the durability of concrete made with crushed glass aggregates10.1016/j.jclepro.2012.09.021 ↗
11. Laboratory investigation of concrete pavements containing fine RAP aggregates10.1061/(ASCE)MT.1943-5533.0002124 ↗
12. Utilization of reclaimed asphalt pavement aggregates containing waste from Sugarcane Mill for production of concrete mixes10.1016/j.jclepro.2017.10.179 ↗
13. Selection of reclaimed asphalt pavement sources and contents for asphalt mix production based on asphalt binder rheological properties, fuel requirements and greenhouse gas emissions10.1016/j.jclepro.2011.10.008 ↗
14. Sustainability assessment for portland cement concrete pavement containing reclaimed asphalt pavement aggregates10.1016/j.jclepro.2018.05.004 ↗
15. Influence of warm-mix asphalt technology and rejuvenator on performance of asphalt mixtures containing 50% reclaimed asphalt pavement10.1016/j.jclepro.2018.04.269 ↗
16. A. Copeland. Reclaimed asphalt pavement in asphalt mixtures: State of the practice (No. 2011 FHWA-HRT-11-021), 2011.
17. Review of very high-content reclaimed asphalt use in plant-produced pavements: state of the art10.1080/10298436.2014.893331 ↗
18. Investigation of the properties of asphalt mixtures incorporating reclaimed SBS modified asphalt pavement10.1016/j.conbuildmat.2016.03.059 ↗
19. Load capacity of concrete slabs with recycled aggregates
20. Use of reclaimed asphalt pavement as an aggregate in Portland cement concrete
21. Expansive and concrete properties of SFS–FRAP aggregates10.1061/(ASCE)MT.1943-5533.0001403 ↗
22. Ternary concrete with fractionated reclaimed asphalt pavement
23. Bonding in cementitious materials with asphalt-coated particles: part I-the interfacial transition zone10.1016/j.conbuildmat.2016.10.019 ↗
24. Bonding in cementitious materials with asphalt-coated particles: part II–cement-asphalt chemical interactions10.1016/j.conbuildmat.2016.10.013 ↗
25. Characteristics of self-consolidating concrete with RAP and SCM10.1016/j.conbuildmat.2015.11.007 ↗
26. Effect of SCMs on fresh, mechanical and durability properties of RAP inclusive concrete10.1016/j.conbuildmat.2017.08.144 ↗
27. Laboratory investigation of RAP aggregates for dry lean concrete mixes10.1016/j.conbuildmat.2018.01.131 ↗
28. Performance of fine RAP concrete containing flyash, silica fume, and bagasse ash10.1061/(ASCE)MT.1943-5533.0002408 ↗
29. Laboratory investigation of portland cement concrete containing recycled asphalt pavements10.1016/j.cemconres.2005.05.002 ↗
30. Mechanical properties of concrete containing recycled asphalt pavements10.1680/macr.2006.58.5.313 ↗
31. Modelling of the adhesion between reclaimed asphalt pavement aggregates and hydrated cement paste10.1016/j.conbuildmat.2017.07.078 ↗
32. Mix design formulation and evaluation of portland cement concrete paving mixtures containing reclaimed asphalt pavement10.1016/j.conbuildmat.2017.06.174 ↗
33. Reclaimed asphalt binder aging and its implications in the management of RAP stockpiles10.1016/j.conbuildmat.2015.10.125 ↗
34. The use of reclaimed asphalt pavement (RAP) aggregates in concrete10.1016/S0713-2743(00)80024-0 ↗
35. Assessing the effects of recycled asphalt pavement materials on the performance of roller compacted concrete10.1016/j.conbuildmat.2015.10.039 ↗
36. Fracture properties of roller-compacted concrete with virgin and recycled aggregates10.3141/2441-17 ↗
37. J. LaHucik, J. Roesler. Material Constituents and Proportioning for Roller-Compacted Concrete Mechanical Properties. Report FHWA-ICT-18-014, Illinois Center for Transportation. , 2018.
38. Feasibility of roller compacted concrete pavement containing different fractions of reclaimed asphalt pavement10.1016/j.conbuildmat.2018.12.047 ↗
39. Evaluation of sulfate resistance of concrete with recycled and natural aggregates10.1016/j.conbuildmat.2017.06.161 ↗
40. Mechanical properties of roller compacted concrete containing rice husk ash with original and recycled asphalt pavement material10.1016/j.matdes.2014.07.072 ↗
41. Ultrafine grinding of sugar cane bagasse ash for application as pozzolanic admixture in concrete10.1016/j.cemconres.2008.11.005 ↗
42. Effect of bacteria on strength, permeation characteristics and micro-structure of silica fume concrete10.1016/j.conbuildmat.2017.03.057 ↗
43. Evaluation of reclaimed asphalt pavement aggregate in road bases and subbases10.3141/1652-33 ↗
44. IS: 2386 Part I to VI, 1997. Methods of test for aggregates for concrete. Bureau of Indian Standards.
45. IRC: SP: 49 · 2014
46. IS 516 · 1959
47. ASTM C642-13 · 2013
48. A laboratory investigation on Dense Bituminous Macadam containing different fractions of coarse and fine RAP10.1016/j.conbuildmat.2018.10.017 ↗
49. Effect of long-term ageing on properties of RAP inclusive WMA mixes10.1016/j.conbuildmat.2019.02.087 ↗
50. CPWD · 2016