Utilization of textile sludge in cement mortar and paste
Source abstract
Abstract
Abstract In this study, effect of replacement of cement by textile sludge on the properties of mortar and paste is investigated. Cement was replaced by textile sludge up to 20% by weight. The effect of cement-textile sludge paste mixes on the setting characteristics; soundness and flow behavior are investigated. The aim of the present research is to investigate the feasibility of using textile sludge as partial replacement of cement, concentrating this investigation on cement paste mixes and a detailed assessment of their performance based on strength, permeation, shrinkage and microstructure. Along with this, drying shrinkage of the mixes was investigated up to 90 days of drying. Results indicate no adverse effect of introducing textile sludge as replacement of cement up to 5% replacement level. There was a considerable loss in strength for higher replacement levels. SEM images indicate porous microstructure for cement-textile sludge mortars at higher replacement levels. XRD spectrums revealed no major qualitative phase change due to addition of textile sludge, and reduction in the quantities of major hydration products.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Building materials and conservation · Cultural Heritage Materials Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Reuse of textile effluent treatment plant sludge in building materials10.1016/j.wasman.2005.01.011 ↗
2. Textile Effluent treatment plant sludge: characterization and utilization in building materials10.1007/s13369-016-2298-9 ↗
3. Study on feasibility of reutilizing textile effluent sludge for producing concrete blocks10.1016/j.jclepro.2015.03.083 ↗
4. S. Vellingiri, P. Velumani, S. Senthilkumar, An Experimental Approach to Evaluate the Performance for the Reuse of Textile Industry Sludge, 10 (2015) 28172–28175.
5. Evaluation of physical stability and leachability of Portland Pozzolona Cement (PPC) solidified chemical sludge generated from textile wastewater treatment plants10.1016/j.jhazmat.2011.05.028 ↗
6. Sewage sludge ash characteristics and potential for use in concrete10.1016/j.conbuildmat.2015.08.122 ↗
7. A.A. Ansari, B.D. Thakur, Sludge management in textile industry: Disposal, recycling and reuse of primary sludge, 10 (2001) 55–60.
8. Characterization and reuse of textile effluent treatment plant waste sludge in clay bricks
9. Utilization of sludge as brick materials10.1016/S1093-0191(02)00037-0 ↗
10. Utilization of textile effluent wastewater treatment plant sludge as brick material10.1007/s10163-013-0139-4 ↗
11. Lightweight bricks manufactured from ground soil, textile sludge, and coal ash
12. Effects of waste glass additions on quality of textile sludge-based bricks
13. Studies on behaviour of concrete with ETP sludge
14. Comparative study on effects of quartz powder and textile sludge on strength of concrete10.14445/22315381/IJETT-V47P209 ↗
15. Utilization of flyash and ETP sludge in concrete with addition of Banana fiber
16. BIS 8112, Ordinary Portland cement, 43 grade-Specification, Bur. Indian Stand. New Delhi. (2013).
17. BIS 650, SPECIFICATION FOR STANDARD SAND FOR TESTING OF CEMENT, Bur. Indian Stand. (1991).
18. BIS 4031:Part6, METHODS OF PHYSICAL TESTS FOR HYDRAULIC CEMENT, Bur. Indian Stand. New Delhi. (1988).
19. BIS 4031: Part4, METHODS OF PHYSICAL TESTS FOR HYDRAULIC CEMENT, Bur. Indian Stand. New Delhi. (1988).
20. BIS 4031: Part5, METHODS OF PHYSICAL TESTS FOR HYDRAULIC CEMENT, Bur. Indian Stand. New Delhi. (1988).
21. BIS 4031: Part3, Methods of physical tests for hydraulic cement: Determination of soundness, Bur. Indian Stand. (1988).
22. ASTM:C939-10, Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method), ASTM Int. (2010). doi:10.1520/C0939-10.2.
23. Mechanical properties and microstructural analysis of cement mortar incorporating marble powder as partial replacement of cement10.1016/j.conbuildmat.2015.08.071 ↗
24. BIS 5816, Method of Test Splitting tensile strength of concrete, Bur. Indian Stand. (1999).
25. ASTM C642-13, Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, 2008. doi:10.1520/C0642-13.5.
26. ASTM C1202, Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration, ASTM Int. West Conshohocken, PA, 2017. (2012) 1–8. doi:10.1520/C1202-12.2.
27. ASTM C157, Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete, ASTM Int. West Conshohocken, PA, 2017. (n.d.).
28. Simple and fast porosity analysis of concrete using X-ray computed tomography Simple and fast porosity analysis of concrete using X-ray computed tomography
29. Phase analysis of Portland cement by combined quantitative x-ray powder diffraction and scanning electron microscopy10.6028/jres.121.004 ↗
30. Performance study of cementitious systems containing zeolite and silica fume: effects of four metal nitrates on the setting time, strength and leaching characteristics10.1016/S0304-3894(02)00005-5 ↗
31. Solution chemistry during cement hydration in the presence of metal hydroxide wastes10.1016/S0008-8846(97)00109-9 ↗
32. Neville · Concr. Technol. · 2010