Evaluation of aging resistance for high-performance crumb tire rubber compound modified asphalt
Source abstract
Abstract
Abstract The preponderances of different modifiers in terms of performance improvement are polymerized in compound modified asphalt. However, limitation still exists in the appropriate evaluation of aging resistance of compound modified asphalt, due to the inevitable aging behavior of asphalt and the various effects of aging on different modifiers. The objective of this paper was to explore reasonable aging resistance evaluation methods for compound modified asphalt. A new type of compound modified asphalt – high-performance crumb tire rubber compound modified asphalt (HR) was concerned and compared with basic SBS modified asphalt and high viscosity compound modified asphalt (HV) under the same conditions. Rotating thin film oven test (RTFOT) and pressure aging vessel (PAV) test were applied to simulate short-term and long-term aging, respectively. Rheological performances of three kinds of asphalt under different aging conditions were systematically tested in the whole temperature domain, including bending beam rheometer test (BBR), multiple stress creep recovery test (MSCR), Brookfield viscosity test (RV), and linear amplitude sweep test (LAS). A new aging index C*AI based on fatigue damage theory was established, and the evaluation effectiveness of other aging indexes on the aging resistance of compound modified asphalt was compared and analyzed. The results showed that different performances of compound modified asphalt have various sensitivity to aging, but in general, HR shows the best aging resistance performance among the three kinds of asphalt. Based on the comparison of different aging indexes, the aging index C*AI can effectively evaluate the aging resistance of compound modified asphalt.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Influence of aging on properties of polymer-modified asphalt10.1016/j.conbuildmat.2018.11.105 ↗
2. Ranking the rheological response of SBS-and EVA-modified bitumen using MSCR and LAS tests10.1061/(ASCE)MT.1943-5533.0002367 ↗
3. Low-and intermediate-temperature behaviour of polymer-modified asphalt binders, mastics, fine aggregate matrices, and mixtures with Reclaimed Asphalt Pavement material
4. Characterization of the effect of foaming water content on the performance of foamed crumb rubber modified asphalt10.1016/j.conbuildmat.2014.03.046 ↗
5. Rheological properties, storage stability and morphology of CR/SBS compound modified asphalt by high-cured method10.1016/j.conbuildmat.2018.10.158 ↗
6. Properties comparison and mechanism analysis of naphthenic oil/SBS and nano-MMT/SBS modified asphalt10.1016/j.conbuildmat.2018.08.067 ↗
7. Effect of nanozinc oxide and organic expanded vermiculite compound on antiaging performances of SBR modified bitumen10.1061/(ASCE)MT.1943-5533.0002060 ↗
8. Long-term ageing of asphalt mixtures
9. Effects of physio-chemical factors on asphalt aging behavior10.1061/(ASCE)MT.1943-5533.0000786 ↗
10. Evaluation of aging behaviors of asphalt binders through different rheological indices10.1016/j.fuel.2018.02.087 ↗
11. Effects of long-term aging on the performances of asphalt binder containing diatoms10.1016/j.conbuildmat.2016.07.073 ↗
12. Effect of organo-montmorillonite on aging performances of asphalt10.1016/j.conbuildmat.2009.01.007 ↗
13. Fracture resistance of asphalt concrete modified with crumb rubber at low temperatures10.1016/j.ijprt.2017.10.003 ↗
14. Linear rheological behavior of bituminous paving materials10.1061/(ASCE)0899-1561(2004)16:3(212) ↗
15. The relationship of the MSCR test to rutting10.1080/14680629.2009.9690236 ↗
16. Current status of Superpave binder specification10.1080/14680629.2009.9690233 ↗
17. Refinement of the Superpave specification parameter for performance grading of asphalt10.1061/(ASCE)0733-947X(2001)127:5(357) ↗
18. Effect of ageing on rheological properties of storage-stable SBS/sulfur-modified asphalts10.1016/j.jhazmat.2010.06.061 ↗
19. Analysis of viscosity and composition properties for crumb rubber modified asphalt10.1016/j.conbuildmat.2018.02.174 ↗
20. Development of a simplified fatigue test and analysis procedure using a viscoelastic damage model
21. Evaluation of polyphosphoric acid-modified binders using multiple stress creep and recovery and linear amplitude sweep tests10.1080/14680629.2015.1132631 ↗
22. Rutting and fatigue cracking performance of SBS-RAP blended binders with a rejuvenator10.1016/j.conbuildmat.2019.01.119 ↗
23. Temperature effects of linear amplitude sweep testing and analysis10.3141/2574-10 ↗
24. Effect of ageing on rheological performances of storage-stable SBS/sulfur-modified asphalts10.1016/j.jhazmat.2010.06.061 ↗
25. Rheological performance of aged polymer modified bitumens
26. Lightly pyrolyzed tire rubber used as potential asphalt alternative10.1016/j.conbuildmat.2016.02.208 ↗
27. Thermal analysis on the interactions among asphalt modified with SBS and different degraded tire rubber10.1016/j.conbuildmat.2018.06.104 ↗
28. Ranking asphalt binders by activation energy 21 for flow
29. Recycling of laboratory-prepared rap mixtures containing crumb rubber modified binders in HMA10.1177/0361198106196200109 ↗
30. Relation of mechanical performances of recycled aged CRM mixtures with binder molecular size distribution10.1016/j.conbuildmat.2008.05.016 ↗
31. Numerical investigation of rubber swelling in bitumen10.1016/j.conbuildmat.2019.04.144 ↗
32. Determination of phase specific localization of carbon black in ternary rubber blends: a macroscopic approach by Fourier transform infrared spectroscopy (FTIR)10.1016/j.polymer.2018.07.013 ↗
33. Nanoclay distribution and its influence on the mechanical performances of rubber blends10.1002/app.30655 ↗
34. Rheological performances of bitumen modified with pyrolytic carbon black10.1016/0016-2361(96)00143-3 ↗
35. Thermal conductivity of polymer compounds with close-packed structure of nano and micro fillers
36. Effects of carbon black on the anti-aging, rheological and conductive properties of SBS/asphalt/carbon black compounds10.1016/j.conbuildmat.2013.11.061 ↗
37. Analysis of viscous flow performances of asphalt in aging process10.1016/j.conbuildmat.2016.06.136 ↗
38. A dual, sequential mechanism for the oxidation of petroleum asphalts10.1080/10916469808949823 ↗
39. Infrared microscopy investigation of oxidation and phase evolution in bitumen modified with polymers10.1016/j.fuel.2007.06.029 ↗