Proposed mix design method for producing sustainable self compacting heat cured recycled aggregate concrete and its microstructural investigation
Source abstract
Abstract
The proposed mix design is based on concept of equivalent mortar volume (EMV) method in conjunction with Nan Su mix design method to develop sustainable self compacting heat cured recycled aggregate concrete (SCHCRAC). The residual mortar content which is adhered to the recycled aggregate is the integral part of total mortar requirement of the proposed design mix. Two stage mixing approaches are followed along with treatment of RCA for enhancing the properties of SCHCRAC. The properties are negatively influenced due to elevated temperature resulting formation of unhydrated cement clinker during heat curing process. To improve the properties and later stage strength, admixtures like fly ash, and silica fume are used. The microstructural investigation is done by using electron probe micro analyzer (EPMA) to justify the improved strength and it is observed that the two stage mixing approach (TSMAsfc) results clear and stronger interfacial transition zone (ITZ). Quantitative analysis and elemental mapping are also carried out to know the presence of strength contributing elements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Sustainable self compacting concrete from C&D waste by improving the microstructures of concrete ITZ10.1016/j.conbuildmat.2017.12.132 ↗
2. Sustainability on durability of self compacting concrete from C&D waste by improving porosity and hydrated compounds: a microstructural investigation10.1016/j.conbuildmat.2018.04.137 ↗
3. Time-dependent and long-term mechanical properties of concretes incorporating different grades of coarse recycled concrete aggregates10.1016/j.engstruct.2017.12.015 ↗
4. Utilizing construction and demolition (C&D) waste as recycled aggregates (RA) in concrete10.1016/j.proeng.2017.01.255 ↗
5. Influence of recycled aggregates on the mechanical and tribological behavior of concrete10.1016/j.egypro.2017.11.237 ↗
6. Recycled construction debris as concrete aggregate for sustainable construction materials10.1016/j.proeng.2016.04.191 ↗
7. Compressive strength and hydration processes of concrete with recycled aggregates10.1016/j.cemconres.2013.11.012 ↗
8. Recycled aggregate concrete for transportation infrastructure10.1016/j.sbspro.2013.11.212 ↗
9. Influence of recycled concrete aggregates on strength properties of concrete10.1016/j.conbuildmat.2008.06.007 ↗
10. Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete10.1016/j.cemconres.2007.02.002 ↗
11. Failure characteristics of self-compacting concretes made with recycled aggregates10.1016/j.conbuildmat.2015.08.036 ↗
12. Study of the rheology of self-compacting concrete with fine recycled concrete aggregates10.1016/j.conbuildmat.2015.08.091 ↗
13. Behaviour of self compacting concrete using Portland pozzolana cement with different levels of fly ash10.1016/j.matdes.2012.11.015 ↗
14. Properties of self compacting concrete using recycled coarse aggregate10.1016/j.proeng.2013.01.023 ↗
15. Short and long-term behavior of structural concrete with recycled concrete aggregate10.1016/j.cemconcomp.2013.01.003 ↗
16. Properties of self-compacting concrete prepared with coarse recycled concrete aggregate10.1016/j.conbuildmat.2009.12.029 ↗
17. Self-compacting concrete: an analysis of 11 years of case studies10.1016/j.cemconcomp.2005.10.003 ↗
18. Influence of curing temperature dependent microstructure on early-age concrete strength development10.1016/j.cemconres.2017.08.022 ↗
19. Effect of supplementary cementitious materials (scm) on delayed ettringite formation in heat-cured concretes10.1016/j.egypro.2017.11.254 ↗
20. Internal curing–a suitable method for improving the performance of heat-cured concrete10.1016/j.conbuildmat.2016.05.159 ↗
21. Durability performance of sustainable self compacting concretes in precast products due to heat curing10.1016/j.conbuildmat.2016.02.097 ↗
22. Fine aggregate and curing temperature effect on concrete maturity10.1016/j.cemconres.2004.04.023 ↗
23. Microstructural analysis of recycled aggregate concrete produced from two-stage mixing approach10.1016/j.cemconres.2004.10.025 ↗
24. Optimization on proportion for recycled aggregate in concrete using two-stage mixing approach10.1016/j.conbuildmat.2006.05.040 ↗
25. Diversifying two-stage mixing approach (TSMA) for recycled aggregate concrete: TSMAs and TSMAsc10.1016/j.conbuildmat.2007.07.024 ↗
26. Performance of mortar prepared with recycled concrete aggregate enhanced by CO2 and pozzolan slurry10.1016/j.cemconcomp.2017.10.013 ↗
27. Mechanical properties of concrete containing 100% treated coarse recycled concrete aggregate10.1016/j.conbuildmat.2017.12.131 ↗
28. An environmentally friendly method to improve the quality of recycled concrete aggregates10.1016/j.conbuildmat.2017.03.191 ↗
29. Properties of treated recycled aggregates and its influence on concrete strength characteristics10.1016/j.conbuildmat.2016.02.064 ↗
30. Experimental study on CO2 curing for enhancement of recycled aggregate properties10.1016/j.conbuildmat.2013.09.008 ↗
31. Effect of surface treatment methods on the properties of self-compacting concrete with recycled aggregates10.1016/j.conbuildmat.2014.04.090 ↗
32. Engineering properties of treated recycled concrete aggregate (RCA) for structural applications10.1016/j.conbuildmat.2013.03.014 ↗
33. Durability of recycled aggregate concrete designed with equivalent mortar volume method10.1016/j.cemconcomp.2009.02.012 ↗
34. IS 383 · 2016
35. A simple mix design method for self-compacting concrete10.1016/S0008-8846(01)00566-X ↗
36. EFNARC · 2005