journal article·2020-11

Improving microwave healing characteristic of asphalt concrete by using fly ash as a filler

Kürşat Yıldız, Mert Atakan

Publisher page

Abstract

Abstract The paper aims to evaluate the usability of fly ash (FA), which is an environmental pollutant, as a filler in asphalt concrete in order to accelerate its microwave heating rate to promote self-healing. In the study, microwave heating rates of asphalt concrete specimens with and without FA were determined via thermographic imaging. Then the three-point bending test was applied to specimens before and after the microwave healing procedure. The crack size of the damaged specimens was also measured via a crack microscope in order to determine the effect of damage levels on microwave healing performance. Test results demonstrated that crack sizes both before and after healing could be interpreted as an indicator of the self-healing performance of the specimen. Microwave heating temperature is the key factor of self-healing, and FA has improved microwave heating rate of asphalt concrete. FA has also improved the healing capability of specimens at some damage levels. It can be concluded that fly ash has great potential as a filler in self-healing asphalt concrete because it can improve self-healing and mechanical characteristics of asphalt concrete, and FA could be reclaimed by using this way.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Concrete and Cement Materials Research · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Self-Healing Asphalt Review: From Idea to Practice10.1002/admi.201800536 ↗
2. P. Bazin, J. Saunier, Deformability, Fatigue and Healing Properties of Asphalt Mixes, in: International Conference on The Structural Design of Asphalt Pavements, Ann Arbor, Michigan, 1967: pp. 553–569. https://trid.trb.org/view/100855.
3. Induction healing of fatigue damage in asphalt test samples10.1016/j.conbuildmat.2014.10.034 ↗
4. Induction heating of mastic asphalt for crack control10.1016/j.conbuildmat.2012.11.075 ↗
5. Environmental impact assessment of induction-healed asphalt mixtures10.1016/j.jclepro.2018.10.223 ↗
6. Effect of air voids content on asphalt self-healing via induction and infrared heating10.1016/j.conbuildmat.2016.09.115 ↗
7. Á.́ García, E. Schlangen, M. Van De Ven, D. Van Vliet, Induction heating of mastic containing conductive fibers and fillers, Materials and Structures/Materiaux et Constructions. 44 (2011) 499–508. doi:10.1617/s11527-010-9644-2.10.1617/s11527-010-9644-2 ↗
8. Effect of bitumen properties in the induction healing capacity of asphalt mixes10.1016/j.conbuildmat.2018.09.102 ↗
9. Snow and ice melting properties of self-healing asphalt mixtures with induction heating and microwave heating10.1016/j.applthermaleng.2017.10.050 ↗
10. Self-healing of asphalt mixture by microwave and induction heating10.1016/j.matdes.2016.05.095 ↗
11. Evaluation of self-healing of asphalt concrete through induction heating and metallic fibers10.1016/j.conbuildmat.2017.04.064 ↗
12. Induction heating of electrically conductive porous asphalt concrete10.1016/j.conbuildmat.2009.12.019 ↗
13. Induction healing of dense asphalt concrete10.1016/j.conbuildmat.2013.07.105 ↗
14. Optimizing the valorization of industrial by-products for the induction healing of asphalt mixtures10.1016/j.conbuildmat.2019.116715 ↗
15. Self-Healing Capacity of Asphalt Mixtures Including By-Products Both as Aggregates and Heating Inductors10.3390/ma11050800 ↗
16. Heating asphalt mixtures with microwaves to promote self-healing10.1016/j.conbuildmat.2012.12.007 ↗
17. Self-healing properties of recycled asphalt mixtures containing metal waste: An approach through microwave radiation heating10.1016/j.jenvman.2018.03.001 ↗
18. Effect of metallic waste addition on the electrical, thermophysical and microwave crack-healing properties of asphalt mixtures10.1016/j.conbuildmat.2018.08.053 ↗
19. Effect of RAP and fibers addition on asphalt mixtures with self-healing properties gained by microwave radiation heating10.1016/j.conbuildmat.2017.10.070 ↗
20. Microwave crack healing on conventional and modified asphalt mixtures with different additives: an experimental approach10.1080/14680629.2019.1587493 ↗
21. Improved microwave heating and healing properties of bitumen by using nanometer microwave-absorbers10.1016/j.conbuildmat.2018.09.050 ↗
22. Microwave deicing for asphalt mixture containing steel wool fibers10.1016/j.jclepro.2018.09.223 ↗
23. Microwave Heating of Steel Slag Asphalt Mixture10.4028/www.scientific.net/KEM.599.193 ↗
24. Enhanced heat release and self-healing properties of steel slag filler based asphalt materials under microwave irradiation10.1016/j.conbuildmat.2018.10.193 ↗
25. Crack healing performance of hot mix asphalt containing steel slag by microwaves heating10.1016/j.conbuildmat.2018.05.278 ↗
26. Induction heating and healing of carbon black modified asphalt concrete under microwave radiation10.1016/j.conbuildmat.2018.04.002 ↗
27. Investigation on mechanical and microwave heating characteristics of asphalt mastic using activated carbon powder as electro-magnetic absorbing materials10.1016/j.conbuildmat.2019.01.050 ↗
28. Accelerated Healing in Asphalt Concrete via Laboratory Microwave Heating
29. High-efficiency heating characteristics of ferrite-filled asphalt-based composites under microwave irradiation10.1061/(ASCE)MT.1943-5533.0001845 ↗
30. A comprehensive review on self-healing of asphalt materials: Mechanism, model, characterization and enhancement10.1016/j.cis.2018.05.003 ↗
31. Optimization of the Calcium Alginate Capsules for Self-Healing Asphalt10.3390/app9030468 ↗
32. Experimental study on stiffness development of asphalt mixture containing cement and Ca(OH)2 as contribution filler10.1016/j.matdes.2015.02.026 ↗
33. A review on the utilization of fly ash10.1016/j.pecs.2009.11.003 ↗
34. A review of the multi-component utilisation of coal fly ash10.1016/j.fuel.2012.03.024 ↗
35. Application of Solid Ash Based Catalysts in Heterogeneous Catalysis10.1021/es801312m ↗
36. Mechanical evaluation of asphalt–aggregate mixtures prepared with fly ash as a filler replacement10.1139/L07-082 ↗
37. Laboratory investigation of the performances of cement and fly ash modified asphalt concrete mixtures10.1016/j.ijprt.2016.08.002 ↗
38. M. Atakan, K. Yıldız, Improving Microwave Heating Characteristic of Asphalt Binder by Using Fly Ash, in: ISBS 2019 - 4th International Sustainable Buildings Symposium, IntechOpen, Dallas, 2019: pp. 285–294. doi:10.5772/intechopen.87836.10.5772/intechopen.87836 ↗
39. Single and multiple healing of porous and dense asphalt concrete10.1177/1045389X14529029 ↗
40. Influence of the Microwave Heating Time on the Self-Healing Properties of Asphalt Mixtures10.3390/app7101076 ↗
41. Investigating the healing capability of asphalt modified with nano-zycotherm and Forta fibers
42. Evaluation of the healing potential of asphalt mixtures based on a modified semi-circular bending test10.1016/j.conbuildmat.2018.10.220 ↗
43. Fracture properties of asphalt concrete under various displacement conditions and temperatures10.1016/j.conbuildmat.2019.06.161 ↗
44. Evaluating Crack Resistance of Asphalt Mixture Based on Essential Fracture Energy and Fracture Toughness10.1061/(ASCE)GM.1943-5622.0001390 ↗
45. Low temperature self-healing character of asphalt mixtures under different fatigue damage degrees10.1016/j.conbuildmat.2019.07.040 ↗
46. Heating potential of aggregates in asphalt mixtures exposed to microwaves radiation10.1016/j.conbuildmat.2019.117035 ↗