Application of the surface free energy method on the mechanism of low-temperature cracking of asphalt mixtures
Source abstract
Abstract
Abstract This study investigated the role of the basic properties of materials in the low-temperature cracking using thermodynamic theory concepts. The Pull Off direct tensile strength test was conducted on 32 asphalt mixtures in two states of cohesive and adhesive. The statistical analysis in the cohesive failure state demonstrated that the adhesion free energy of the asphalt binder-aggregate was not effective in this cohesion failure. Also, the cohesion mode results showed that stiffness of asphalt binder has negative and cohesion free energy, specific surface area and base-to-acid ratio of the aggregate have positive effect on the low-temperature strength of asphalt mixtures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Influence by chemical constitution of aggregates on demulsification speed of emulsified asphalt based on UV-spectral analysis10.1016/j.conbuildmat.2019.03.309 ↗
2. Microstructure of synthetic composite interfaces and verification of mixing order in cold-recycled asphalt emulsion mixture10.1016/j.jclepro.2020.121467 ↗
3. Mechanical and microstructural characteristics of different interfaces in cold recycled mixture containing cement and asphalt emulsion10.1016/j.jclepro.2020.120674 ↗
4. Assessment of Low Temperature Cracking in Asphalt Pavement Mixes and Rheological Performance of
5. Thermal stress restrained specimen test to evaluate low-temperature cracking of asphalt-aggregate mixtures
6. Effect of long-term laboratory aging on rheological properties and cracking resistance of polymer-modified asphalt binders at intermediate and low temperature range10.1016/j.conbuildmat.2019.07.206 ↗
7. Determination of low-temperature crack control parameter of binding asphalt materials based on gray correlation analysis10.1016/j.conbuildmat.2019.05.065 ↗
8. Selection of a performance test to assess the cracking resistance of asphalt concrete materials10.1016/j.conbuildmat.2018.05.258 ↗
9. A.A. Griffith, The phenomena of rupture and flow in solids, Philosophical transactions of the royal society of london. Series A, containing papers of a mathematical or physical character 221 (1921) 163-198.10.1098/rsta.1921.0006 ↗
10. Correspondence principles and a generalizedJ integral for large deformation and fracture analysis of viscoelastic media10.1007/BF01140837 ↗
11. H. Yaacob, M.A. Mughal, R.P. Jaya, M.R. Hainin, D.S. Jayanti, C.N.C. Wan, Rheological properties of styrene butadiene rubber modified bitumen binder, Jurnal Teknologi 78(7-2) (2016).10.11113/jt.v78.9503 ↗
12. Surface Free Energy of Asphalt-Aggregate System and Performance Analysis of Asphalt Concrete
13. Adhesion in bitumen-aggregate systems and quantification of the effects of water on the adhesive bond
14. Interfacial Lifshitz-van der Waals and polar interactions in macroscopic systems10.1021/cr00088a006 ↗
15. Application of surface energy measurements to evaluate moisture susceptibility of asphalt and aggregates
16. Mechanical performance of asphaltic concrete incorporating untreated and treated waste cooking oil10.1016/j.conbuildmat.2017.06.048 ↗
17. Development of methods to quantify bitumen-aggregate adhesion and loss of adhesion due to water
18. Limits on Adhesive Bond Energy for Improved Resistance of Hot-Mix Asphalt to Moisture Damage10.1177/0361198106197000101 ↗
19. N.M. Wasiuddin, Effect of Additives on Surface Free Energy Characteristics of Aggregates and Binders in Hot Mix Asphalt, ProQuest2007.
20. Evaluation of Moisture Damage Mechanisms and Effects of Hydrated Lime in Asphalt Mixtures through Measurements of Mixture Component Properties and Performance Testing10.1061/(ASCE)0899-1561(2008)20:10(659) ↗
21. Effects of nanocharcoal coconut-shell ash on the physical and rheological properties of bitumen10.1016/j.conbuildmat.2017.10.019 ↗
22. Evaluating the Effect of Mix Design and Thermodynamic Parameters on Moisture Sensitivity of Hot Mix Asphalt10.1061/(ASCE)MT.1943-5533.0001734 ↗
23. M.E. Abdullah, K.A. Zamhari, R. Buhari, N.H.M. Kamaruddin, N. Nayan, M.R. Hainin, N.A. Hassan, R.P. Jaya, N.I.M. Yusoff, A review on the exploration of nanomaterials application in pavement engineering, Jurnal Teknologi 73(4) (2015).10.11113/jt.v73.4291 ↗
24. Determination of the stripping process of asphalt mixtures and the effective mix design and SFE parameters on its different phases10.1016/j.conbuildmat.2019.04.043 ↗
25. Laboratory investigation of using liquid anti-stripping additives on the performance characteristics of asphalt mixtures10.1007/s42947-019-0033-0 ↗
26. Effects of Asphalt Binder Modifying with Polypropylene on Moisture Susceptibility of Asphalt Mixtures with Thermodynamically Concepts
27. Effects of asphalt binder modifying with nano hydrated lime on moisture susceptibility of asphalt mixtures with thermodynamically concepts10.1080/10916466.2019.1702685 ↗
28. Surface Energy Measurement of Asphalt and Its Application to Predicting Fatigue and Healing in Asphalt Mixtures10.3141/1810-06 ↗
29. Fatigue resistance of hot-mix asphalt concrete (HMAC) mixtures using the calibrated mechanistic with surface energy (CMSE) measurements approach
30. Howson · 2009
31. The influence of cohesion and adhesion parameters on the fatigue life of hot mix asphalt10.1080/00218464.2016.1201656 ↗
32. Azarhoosh · 2018 · 187
33. Use of coconut shell from agriculture waste as fine aggregate in asphaltic concrete
34. Evaluation of Fatigue Cracking in Asphalt Mixtures Based on Surface Energy10.1061/(ASCE)MT.1943-5533.0001465 ↗
35. Using the Surface Free Energy Method to Evaluate the Effects of Nanomaterial on the Fatigue Life of Hot Mix Asphalt10.1061/(ASCE)MT.1943-5533.0001614 ↗
36. Surface-Free Energy and Fatigue Performance of Hot-Mix Asphalt Modified with Nano Lime10.1061/(ASCE)MT.1943-5533.0002836 ↗
37. Adhesion and Cohesion in Asphalt-Aggregate Systems
38. Y. Jia, R.-j. Cao, B. LI, Superpave fundamentals reference manual, China Communications Publishing & Media Management Co., Ltd, 2005.
39. A. TP, 91. Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Binder Bond Strength (BBS) Test, American Association of State Highway and Transportation Officials, 2011.
40. A.S.f.T.a.M. (ASTM), Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers, ASTM D4541, American Society for Testing and Materials (ASTM), West Conshohocken, PA, 2017.
41. Adhesive and Cohesive Properties of Asphalt-Aggregate Systems Subjected to Moisture Damage10.1080/14680629.2010.9690325 ↗
42. G.H. Hamedi, A. Sahraei, M.R. Esmaeeli, Investigate the effect of using polymeric anti-stripping additives on moisture damage of hot mix asphalt, European Journal of Environmental and Civil Engineering (2018) 1-14.10.1080/19648189.2018.1517697 ↗
43. Effect of SARA on Rheological Properties of Asphalt Binders10.1061/(ASCE)MT.1943-5533.0002723 ↗
44. Brown · 2009
45. K. Stuart, Moisture damage in asphalt mixtures-a state-of-the-art report, (1990).
46. Road Aggregate Choice Based on Silicate Quality and Bitumen Adhesion10.1061/(ASCE)0733-947X(1992)118:1(50) ↗
47. Using Hydrophobic Coating on Aggregate Surfaces to Reduce Moisture Damage in Asphalt Mixture10.1061/(ASCE)MT.1943-5533.0002413 ↗