Valorisation of water treatment sludge for lightweight aggregate production
Source abstract
Abstract
Water treatment sludge is an industrial by-product which has recently been classified as a waste by the European Commission. The main goal of this work is to valorise this waste to produce lightweight aggregates. Formulations with sludge substituting expanded clay up to 50 wt% were produced. The physical properties of the lightweight aggregates such as bloating index, density and porosity were studied. The introduction of the sludge without expanding properties, reduced the expandability of the clay and the porosity of the aggregates. The density increased from 0.32 g/cm3 in aggregates without sludge to 1.46 g/cm3 in aggregates with 50 wt% of sludge. It is shown that lightweight aggregates can be produced using mixtures of expanded clay and water treatment sludge, with low substitution percentages (up to 15 wt% of sludge). Aggregates up to 15 wt% of sludge were further studied. The compressive strength increased with sludge wt.%, and the concentrations of heavy metals and metalloids, assessed through leaching tests, were well below the stablished limits. Two preliminary tests of lightweight aggregate concrete were produced: LWAC 1 was formulated with commercial lightweight aggregates and LWAC 2 with aggregates containing 7 wt% of the sludge and commercial lightweight aggregates. The physical, mechanical and thermal properties of LWAC 1 and LWAC 2 were found to be very similar. Our work demonstrates the feasibility in using water treatment sludge as a by-product to produce lightweight aggregates suitable for thermal insulation and lightweight applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Rapid sintering of weathered municipal solid waste incinerator bottom ash and rice husk for lightweight aggregate manufacturing and product properties10.1016/j.jclepro.2019.06.010 ↗
2. Sustainable management of water treatment sludge through 3 ‘R’ concept10.1016/j.jclepro.2016.02.073 ↗
3. Characterization of Water Treatment Plant’s Sludge and its Safe Disposal Options10.1016/j.proenv.2016.07.088 ↗
4. A sustainable calcined water treatment sludge and rice husk ash geopolymer10.1016/j.jclepro.2016.01.060 ↗
5. Response surface methodological approach to optimize the coagulation – flocculation process in drinking water treatment10.1016/j.cherd.2010.12.004 ↗
6. Constructive approaches towards water treatment works sludge management: An international review of beneficial re-uses10.1080/10643380600776239 ↗
7. The reuse of water treatment sludge as a coagulant for post-treatment of UASB reactor treating urban wastewater10.1016/j.jclepro.2013.12.037 ↗
8. Recycling of sludge from drinking water treatment as ceramic material for the manufacture of tiles10.1016/j.jclepro.2018.08.094 ↗
9. Reuse of Water Treatment Plant Sludge in Brick Manufacturing
10. Reuse of water purification sludge as raw material in cement production10.1016/j.cemconcomp.2010.02.009 ↗
11. Validity of water industry wastes in cement industry
12. Water treatment sludge and rice husk ash to sustainable geopolymer production10.1016/j.jclepro.2017.02.076 ↗
13. Sustainable management of water potabilization sludge by means of geopolymers production10.1016/j.jclepro.2019.04.299 ↗
14. Re-use of water treatment works sludge to enhance particulate pollutant removal from sewage10.1016/j.watres.2004.07.033 ↗
15. Strength development and microstructure characteristics of artificial concrete pillar considering fiber type and content effects10.1016/j.conbuildmat.2020.119408 ↗
16. Sustainable use of copper slag in self compacting concrete containing supplementary cementitious materials10.1016/j.jclepro.2017.03.031 ↗
17. Use of clay in the manufacture of lightweight aggregate10.1016/j.conbuildmat.2017.12.018 ↗
18. Investigation of fire and chemical effects on the properties of alkali-activated lightweight concretes produced with basaltic pumice aggregate10.1016/j.conbuildmat.2020.119969 ↗
19. Non-structural lightweight concrete with volcanic scoria aggregates for lightweight fill in building’s floors10.1016/j.conbuildmat.2016.12.213 ↗
20. Lightweight aggregates from waste materials: Reappraisal of expansion behavior and prediction schemes for bloating10.1016/j.conbuildmat.2016.09.111 ↗
21. Recycling of air pollution control residues from municipal solid waste incineration into lightweight aggregates10.1016/j.wasman.2013.10.029 ↗
22. Investigation of properties of low-strength lightweight concrete for thermal insulation10.1016/j.buildenv.2005.09.024 ↗
23. Use of Furnace Bottom Ash for producing lightweight aggregate concrete with thermal insulation properties10.1016/j.jclepro.2015.03.007 ↗
24. Engineering properties of lightweight aggregate concrete containing limestone powder and high volume fly ash10.1016/j.jclepro.2016.06.082 ↗
25. Lightweight concrete production with low Portland cement consumption10.1016/j.jclepro.2011.10.010 ↗
26. A review of operating performance in green buildings: Energy use, indoor environmental quality and occupant satisfaction10.1016/j.enbuild.2018.11.017 ↗
27. Manufacture and performance of lightweight aggregate from waste drill cuttings10.1016/j.jclepro.2018.10.134 ↗
28. Characteristics of lightweight aggregates from primary and recycled raw materials10.1016/j.conbuildmat.2007.06.009 ↗
29. Relation of Chemical Properties to the Bloating of Clays10.1111/j.1151-2916.1951.tb11619.x ↗
30. R. De Gennaro, P. Cappelletti, G. Cerri, M. De Gennaro, M. Dondi, A. Langella, Zeolitic tuffs as raw materials for lightweight aggregates, 25 (2004) 71–81. https://doi.org/10.1016/j.clay.2003.08.005.10.1016/j.clay.2003.08.005 ↗
31. Recycling of ‘alperujo’ (olive pomace) as a key component in the sintering of lightweight aggregates10.1016/j.jclepro.2019.118041 ↗
32. The properties of fly ash derived lightweight aggregates obtained using microwave radiation10.1016/j.conbuildmat.2019.116677 ↗
33. G.P. Lyra V. dos Santos B.C. De Santis R.R. Rivaben C. Fischer E.M. de J.A. Pallone, J.A. Rossignolo Reuse of sugarcane bagasse ash to produce a lightweight aggregate using microwave oven sintering Constr. Build. Mater. 222 (2019) 222 228 10.1016/j.conbuildmat.2019.06.15010.1016/j.conbuildmat.2019.06.150 ↗
34. Effect of SiO2, Al2O3 and CaO on characteristics of lightweight aggregates produced from MSWI bottom ash sludge (MSWI-BAS)10.1016/j.conbuildmat.2019.01.104 ↗
35. Utilization of municipal sewage sludge and waste glass powder in production of lightweight aggregates10.1016/j.conbuildmat.2020.119413 ↗
36. Application of water treatment sludge in the manufacturing of lightweight aggregate10.1016/j.conbuildmat.2013.02.016 ↗
37. Synergistic recycling of calcined clayey sediments and water potabilization sludge as geopolymer precursors: Upscaling from binders to precast paving cement-free bricks10.1016/j.conbuildmat.2016.12.039 ↗
38. Utilisation of sludge waste from water treatment for ceramic products10.1016/j.conbuildmat.2012.12.041 ↗
39. European Committee for Standardization, EN 14899: Characterization of waste. Sampling of waste materials. Framework for the preparation and application of a sampling plan., (2005).
40. Compatibility analysis of municipal solid waste incineration residues and clay for producing lightweight aggregates10.1016/j.clay.2014.10.016 ↗
41. Concrete and Concrete Aggregates · 2007
42. The laws of proportioning concrete
43. Combined use of MSWI bottom ash and fly ash as aggregate in concrete formulation: Environmental and mechanical considerations10.1016/j.jhazmat.2009.03.141 ↗
44. Utilization of waste clay bricks as coarse and fine aggregates for the preparation of lightweight aggregate concrete10.1016/j.jclepro.2018.08.103 ↗
45. Utilization of crushed clay brick in concrete industry10.1016/j.aej.2013.12.003 ↗
46. Sound insulation properties of rubberized lightweight aggregate concrete10.1016/j.jclepro.2017.11.044 ↗
47. Examining soaking duration of coarse clay and shale lightweight aggregates for internal curing in conventional concrete10.1016/j.conbuildmat.2020.118754 ↗
48. Potential use of lightweight aggregate (LWA) produced from bottom coal ash for internal curing of concrete systems10.1016/j.cemconcomp.2019.103428 ↗
49. European Committee for Standardization, EN 1097-6: Tests for mechanical and physical properties of aggregates. Part 6: Determination of particle density and water absorption., (2000).
50. Properties of lightweight aggregate produced by rapid sintering of incinerator bottom ash10.1016/j.resconrec.2004.05.004 ↗
51. Measurement and statistics of single pellet mechanical strength of differently shaped catalysts
52. European Committee for Standardization, EN 12457-4: Compliance test for leaching of granular waste materials and sludges. Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)., (2002).
53. European Committee for Standardization, EN 196-1: Methods of testing cement. Part 1: Determination of strength., (2016).
54. American Society for Testing and Materials, ASTM D5930: Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique., (2001).
55. Magnesium phosphate cements formulated with low grade magnesium oxide incorporating phase change materials for thermal energy storage10.1016/j.conbuildmat.2017.07.227 ↗
56. Thermal decomposition of natural dolomite10.1134/S0020168511120156 ↗
57. Re-use of drinking water treatment plant (DWTP) sludge : Characterization and technological behaviour of cement mortars with atomized sludge additions10.1016/j.cemconres.2009.11.012 ↗
58. Lightweight aggregates from mixtures of granite wastes with clay10.1016/j.jclepro.2016.01.017 ↗
59. Mechanical characterization of concrete produced with recycled lightweight expanded clay aggregate concrete10.1016/j.jclepro.2014.11.015 ↗
60. Interdependence of microstructure and strength of structural lightweight aggregate concrete10.1016/0958-9465(92)90022-N ↗
61. Cellular concrete review: New trends for application in construction10.1016/j.conbuildmat.2018.12.136 ↗
62. Lightweight aggregate concrete with an open structure and a porous matrix with an improved ratio of compressive strength to dry density10.1016/j.conbuildmat.2020.120167 ↗
63. American Society for Testing and Materials, ASTM C330 / C330M: Standard Specification for Lightweight Aggregates for Structural Concrete., (2009).
64. Effect of lightweight aggregates on the mechanical properties and brittleness of lightweight aggregate concrete10.1016/j.conbuildmat.2012.02.053 ↗
65. Structural lightweight aggregate concrete with reduced density- lightweight aggregate foamed concrete10.1016/0262-5075(80)90029-9 ↗
66. Lightweight composite concrete produced with water treatment sludge and sawdust: Thermal properties and potential application10.1016/j.conbuildmat.2010.06.012 ↗
67. A comparison study of the mechanical properties and drying shrinkage of oil palm shell and expanded clay lightweight aggregate concretes10.1016/j.matdes.2014.04.001 ↗
68. Spectrum analysis of the interfacial zone of lightweight aggregate concrete10.1016/j.matlet.2004.05.071 ↗