Effect of fineness on the pozzolanic reaction kinetics of slag in composite binders: Experiment and modelling
Source abstract
Abstract
Abstract In this study, the kinetics of the pozzolanic reaction of slag with various levels of fineness was characterized by experimental analysis and model simulation. The maximum reaction rate of ultrafine slag at the main pozzolanic reaction peak was found to be 67% larger than that of ordinary slag, with this gap becoming even larger (228%) at a high curing temperature. The early pozzolanic reaction degree was found to increase by 40%–60% due to increased slag fineness. At late ages, the pozzolanic reaction degree was still increased by approximately 40%–70% at room temperature but only by 20% at a high curing temperature due to increased slag fineness. The parameters for the kinetic model illustrate that slag fineness has little influence on the nucleation rate and linear growth rate of the product per unit surface area. However, the increase in the total surface area results in a large number of nuclei for the pozzolanic reaction products, leading to a large amount of product and a high reaction degree for ultrafine slag. The apparent activation energy for the pozzolanic reaction of ultrafine slag was found to be identical to that of ordinary slag, showing that an increase in slag fineness does not change the mechanism governing the pozzolanic reaction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Materials Engineering and Processing · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Supplementary cementitious materials10.1016/j.cemconres.2010.12.001 ↗
2. Recent advances in understanding the role of supplementary cementitious materials in concrete10.1016/j.cemconres.2015.03.018 ↗
3. Investigation on the poor fl uidity of electrically conductive cement-graphite paste: Experiment and simulation10.1016/j.matdes.2019.107679 ↗
4. New insights into the early reaction of NaOH-activated slag in the presence of CaSO410.1016/j.compositesb.2020.108207 ↗
5. Supplementary cementitious materials: New sources, characterization, and performance insights10.1016/j.cemconres.2019.05.008 ↗
6. Reactivity of supplementary cementitious materials (SCMs) in cement blends10.1016/j.cemconres.2019.105799 ↗
7. Advances in alternative cementitious binders10.1016/j.cemconres.2010.11.012 ↗
8. The effect of size distribution of slag particles obtained in dry granulation on blast furnace slag cement strength10.1016/j.powtec.2019.11.115 ↗
9. Efficiency of high energy over conventional milling of granulated blast furnace slag powder to improve mechanical performance of slag cement paste10.1016/j.powtec.2016.12.014 ↗
10. Modelling the yield stress of ternary cement–slag–fly ash pastes based on particle size distribution10.1016/j.powtec.2014.06.041 ↗
11. Preparation of electrolytic manganese residue–ground granulated blastfurnace slag cement10.1016/j.powtec.2013.03.003 ↗
12. Preparation of drying powder inorganic polymer cement based on alkali-activated slag technology10.1016/j.powtec.2017.02.036 ↗
13. Resources, Conservation & Recycling Reuse of hazardous electrolytic manganese residue : Detailed leaching characterization and novel application as a cementitious material10.1016/j.resconrec.2019.104645 ↗
14. Effects of combined usage of GGBS and fly ash on workability and mechanical properties of alkali activated geopolymer concrete with recycled aggregate10.1016/j.compositesb.2018.11.067 ↗
15. Accelerating the reaction kinetics and improving the performance of Na2CO3-activated GGBS mixes10.1016/j.cemconres.2019.105927 ↗
16. Compressive strength and electrical properties of concrete with white Portland cement and blast-furnace slag10.1016/j.cemconcomp.2011.11.017 ↗
17. Influence of high-volume mineral mixtures and the steam-curing temperatures on the properties of precast concrete
18. Durability and mechanical properties of high strength concrete incorporating ultra fine Ground Granulated Blast-furnace Slag10.1016/j.conbuildmat.2012.11.052 ↗
19. Characterizing blended cement pastes under cyclic freeze–thaw actions by electrical resistivity10.1016/j.conbuildmat.2013.02.042 ↗
20. Characterizing pore structure of cement blend pastes using water vapor sorption analysis10.1016/j.matchar.2014.06.007 ↗
21. High performance concrete containing lower slag amount: a complex view of mechanical and durability properties10.1016/j.conbuildmat.2008.11.018 ↗
22. Influence of the initial moist curing time on the sulfate attack resistance of concretes with different binders10.1016/j.conbuildmat.2017.03.235 ↗
23. Activation of blast furnace slag by a new method10.1016/j.cemconres.2009.05.012 ↗
24. The effect of fineness on the properties of the blended cements incorporating ground granulated blast furnace slag and ground basaltic pumice10.1016/j.conbuildmat.2005.11.005 ↗
25. Investigation on early-age hydration, mechanical properties and microstructure of seawater sea sand cement mortar10.1016/j.conbuildmat.2020.118776 ↗
26. Effects of nanoalumina and graphene oxide on early-age hydration and mechanical properties of cement paste10.1061/(ASCE)MT.1943-5533.0001926 ↗
27. Influence of nanolimestone on the hydration, mechanical strength, and autogenous shrinkage of ultrahigh-performance concrete10.1061/(ASCE)MT.1943-5533.0001327 ↗
28. Packing density of mortar containing polypropylene, carbon or basalt fibres under dry and wet conditions10.1016/j.powtec.2018.10.005 ↗
29. Filler technology of adding granite dust to reduce cement content and increase strength of mortar10.1016/j.powtec.2018.09.084 ↗
30. Quantification of the influences of aggregate shape and sampling method on the overestimation of ITZ thickness in cementitious materials10.1016/j.powtec.2017.12.008 ↗
31. Strategy for interfacial overlapping degree in multiphase materials with complex convex particles10.1016/j.powtec.2015.06.020 ↗
32. Effects of ultra-fine ground granulated blast-furnace slag on initial setting time, fluidity and rheological properties of cement pastes10.1016/j.powtec.2018.12.094 ↗
33. The filler effect: the influence of filler content and surface area on cementitious reaction rates10.1111/jace.12264 ↗
34. Hydration heat of slag or fly ash in the composite binder at different temperatures10.1016/j.tca.2017.07.002 ↗
35. A new hydration kinetics model of composite cementitious materials, part 1: hydration kinetic model of Portland cement10.1111/jace.16845 ↗
36. A new hydration kinetics model of composite cementitious materials, Part 2: physical effect of SCMs10.1111/jace.17055 ↗
37. Estimation of specific surface area of particles based on size distribution curve10.1680/jmacr.17.00045 ↗
38. Y. Ghasemi, A. Cwirzen, Quantification of the shape of particles for calculating specific surface area of powders, in: Int. RILEM Conf. Mater. Syst. Struct. Civ. Eng. Conf. Segm. Simul. Tools Used Exec. Phase Concr. Struct., Lyngby, Denmark, 2016.
39. Determination of cement hydration and pozzolanic reaction extents for fly-ash cement pastes10.1016/j.conbuildmat.2011.07.007 ↗
40. Hydration mechanisms of composite binders containing phosphorus slag at different temperatures10.1016/j.conbuildmat.2017.04.202 ↗
41. Modeling the hydration of concrete incorporating fly ash or slag10.1016/j.cemconres.2010.03.001 ↗
42. Advances in understanding cement hydration mechanisms10.1016/j.cemconres.2019.105823 ↗
43. Quantitative analysis of hydration degree of composite binder by image analysis and non-evaporable water content
44. Modeling of hydration kinetics in cement based materials considering the effects of curing temperature and applied pressure10.1016/j.conbuildmat.2011.08.037 ↗
45. A multi-phase kinetic model to simulate hydration of slag–cement blends10.1016/j.cemconcomp.2010.03.006 ↗
46. Maekawa · 2009
47. Degree of hydration and gel/space ratio of high-volume fly ash/cement systems10.1016/S0008-8846(00)00213-1 ↗
48. Evaluation of the mechanical properties of concrete considering the effects of temperature and aging10.1016/j.conbuildmat.2011.11.001 ↗
49. Strength development of mortars containing ground granulated blast-furnace slag: effect of curing temperature and determination of apparent activation energies10.1016/j.cemconres.2005.11.002 ↗
50. Hydration kinetics of composite binder containing slag at different temperatures10.1007/s10973-015-4631-z ↗
51. Effect of water-to-binder ratio on the hydration kinetics of composite binder containing slag or fly ash10.1007/s10973-016-6015-4 ↗