journal article·2015-11Open access

The manufacture of lightweight aggregates from recycled masonry rubble

A. Mueller, A. Schnell, K. Ruebner

Abstract

Abstract At present, heterogeneous and fine-grained masonry rubble can only be recycled at very low level. To overcome this limitation, the material was employed as feedstock for the production of lightweight aggregates in a thermal process similar to that used in the manufacture of expanded clay and expanded slate. To that end, the fundamental suitability of masonry rubble as a raw material was evaluated. Experiments were carried out which indicated that lightweight granules with defined, adjustable properties similar to those of natural-material-based aggregates could be manufactured from masonry rubble. Structural lightweight concretes produced with these secondary aggregates achieved comparable performance to lightweight concretes produced with conventional expanded clay. Lightweight recycled building material aggregates represent a product that hardly requires any primary resources in its manufacture. In principle, the technique also seems to be well suited for high-quality recycling of other mineral waste materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Lightweight aggregate based on waste glass and its alkali-silica reactivity10.1016/S0008-8846(01)00663-9 ↗
2. Strength of lightweight glass aggregate concrete10.1061/(ASCE)0899-1561(2006)18:5(710) ↗
3. E. Ducke, C. Kaps, Neue Entwicklungen bei der Herstellung von Blähgranulaten aus Altglas, Beitrag Recycling ’99, Bauhaus-Universität, Weimar, 29.04.1999.
4. G. Piltz, E. Hesse, Untersuchung der Eignung von Steinkohlenwaschbergen zur Herstellung von Blähton, Ziegelindustrie 9 (1973) 316–324.
5. A. Leismann, Verwertung der industriellen Reststoffe Steinkohlenbergematerial und Rotschlamm zur Herstellung von Blähton-Granulat, Dissertation RWTH Aachen, Shaker Verlag, Aachen, 1997.
6. B. Schickle, T. Tonnesen, R. Telle, Recycling of cool flotation residue for the production of porous lightweight materials, in: Ceramic Monographs – Handbook of Ceramics, Supplement to Interceram, vol. 58, 2009, H. 4, pp. 1–4.
7. Preparation of lightweight sintered aggregate based on combustion ash
8. Production of lightweight aggregates from mining and industrial waste10.1016/j.jenvman.2009.03.009 ↗
9. Microstructure and mineralogy of lightweight aggregates manufactured from mining and industrial wastes10.1016/j.conbuildmat.2011.03.053 ↗
10. Reuse of incineration fly ashes and reaction ashes for manufacturing lightweight aggregate10.1016/j.conbuildmat.2009.08.008 ↗
11. Leichtzuschlagstoffe aus feinkörnigen Abfällen der Bimsaufbereitung
12. Züblin Umwelttechnik GmbH, Verwertung von Sedimenten, Firmenprospekt, 1995.
13. J. Kraus, Herstellung von Leichtzuschlagstoffen aus Klärschlamm, Dissertation Universität Karlsruhe, Institutsverlag Siedlungswasserwirtschaft, 2003.
14. Development of lightweight aggregate from dry sewage sludge and coal ash10.1016/j.wasman.2008.09.006 ↗
15. Production of synthetic lightweight aggregate using reservoir sediments10.1016/j.cemconcomp.2010.10.008 ↗
16. Effects of CaO addition on lightweight aggregates produced from water reservoir sediment10.1016/j.conbuildmat.2010.12.034 ↗
17. Effects of heat treatment on the physical properties of lightweight aggregate from water reservoir sediment10.1016/j.ceramint.2011.04.122 ↗
18. Producing synthetic lightweight aggregates from reservoir sediments for concrete and masonry10.1016/j.conbuildmat.2011.08.051 ↗
19. A. Mueller, Das Rohstoffpotential von Bauabfällen, Müll-Handbuch, Band 2, 1691, pp. 1–32.
20. Increased added value reuse of construction waste in clay based building ceramics10.1179/1743676113Y.0000000118 ↗
21. Reusing ceramic wastes in concrete10.1016/j.conbuildmat.2009.10.023 ↗
22. Relation of chemical properties to the bloating of clays10.1111/j.1151-2916.1951.tb11619.x ↗
23. Lightweight aggregates for the construction industry
24. P.A. Webb, Volume and Density Determinations for Particle Technologists, Micromeritics Instrument Corp. 2/16/2001.
25. M. Lindemann, Einflussgrößen auf die thermische Porosierung von Leichtgranulaten aus mineralischen Rohstoffen, Bachelorarbeit Bauhaus-Universität Weimar, 2012.
26. DIN EN 1744-1 · 2013
27. K. Ruebner, A. Schnell, F. Haamkens, P. Jakubcová, A. Mueller, Leichte Gesteinskörnungen aus Mauerwerkbruch für die Betonherstellung, in: H.-M. Ludwig (Ed.), Tagungsband 18. Internationale Baustofftagung ibausil 2012, Band 2, Bauhaus-Universität Weimar, F.A. Finger-Institut für Baustoffkunde, Weimar, 2012, pp. 1058–1065.
28. Leichtbeton aus Aufbaukörnungen
29. DIN EN 206-1 · 2001
30. Aufbereitung von sekundären Baurohstoffen durch Agglomeration10.1002/cite.201200075 ↗
31. K. Hannig, H. Wachtl, Beitrag zur Ermittlung von Apparatekennlinien an Drehrohröfen für die Herstellung von Blähton, Dissertation Hochschule für Architektur und Bauwesen Weimar, 1983.
32. M. Arendt, Kreislaufwirtschaft im Baubereich: Steuerung zukünftiger Stoffströme am Beispiel Gips, Dissertation, Forschungszentrum Karlsruhe GmbH, Karlsruhe 2000.
33. A. Mueller, Bauschutt ohne Gips, Steinbruch und Sandgrube, 11 (2012) 40–45.
34. A. Mueller, M. Landmann, U. Palzer, Rückgewinnung sortenreiner Baustofffraktionen aus Mauerwerk, Mauerwerk, 17(6) (2013), 1–8.10.1002/dama.201300598 ↗
35. Aufbaukörnungen aus Mauerwerkbruch