Investigation of effects of aggregate size on the fracture behavior of high performance concrete by acoustic emission
Source abstract
Abstract
As an important component of concrete, aggregate has a significantly influence the fracture behavior of high performance concrete. In this paper, the effects of aggregate size distribution on the fracture properties of high performance concretes with strength ranging from 50 MPa to 80 MPa were investigated under three-point-bending tests. Acoustic emission (AE) technique with three-dimensional orientation feature was applied to study the effect of maximum aggregate size (dmax) on fracture properties and the facture process zone (FPZ) at the crack tip. The results showed that the fracture energy of concrete increased with the increase of dmax. The larger the size of the aggregate, the more significant the deflection of propagating crack and the greater the FPZ can form. That AE hits had a very good relation indicating its potential to measure inner damage of concrete during cracking. (A) Reprinted with permission from Elsevier.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Rock Mechanics and Modeling · Geophysical Methods and Applications · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Experimental study on the effect of aggregate content on fracture behavior of concrete10.1016/S0013-7944(00)00036-9 ↗
2. Effect of aggregate type on the mechanical behavior of concrete
3. The effects of mix variables on concrete fracture mechanics parameters
4. Issa MA, Shafiq AB, Chudnovsky A. Effect of inclusion strength and geometry on mortar fracture. In: Lin YK, Su TC, editors. Proceeding of the 11th conference of engineering mechanics. Fort Lauderdale, FL May 19–22 1996: p.1038–1041.
5. Fracture toughness of concrete at early ages
6. Influence of aggregate size on fracture process zone of concrete detected with three dimensional acoustic emission technique10.1016/0008-8846(91)90168-H ↗
7. Kleinschrodt · 1989
8. Kaplan, MG. Ultrasonic pulse velocity, Dynamic modulus of elasticity, Possion ratio, and Strength of concrete made with thirteen different coarse aggregates. RILEM Bulletin, No. 1. New Series.
9. Process zone and acoustic emission measurement in concrete10.1007/BF02328992 ↗
10. Application of acoustic emission and laser holography to study micro-fracture in concrete
11. Modeling concrete damage by acoustic emission
12. Localization of microcracking in concrete under uniaxial tension
13. Microcrack characterization in concrete under uniaxial tension10.1680/macr.1996.48.176.219 ↗
14. The influence of microcracking on the mechanical behavior of cement-based materials10.1016/1065-7355(95)90020-9 ↗
15. Micro-macro fracture relationships and acoustic emissions in concrete10.1016/S0950-0618(99)00009-4 ↗
16. Comparison of acoustic emission activity in steel-reinforced and FRP-reinforced concrete beams10.1016/S0950-0618(00)00036-2 ↗
17. Signal-based acoustic emission techniques in civil engineering10.1061/(ASCE)0899-1561(2003)15:3(274) ↗
18. Experimental study on AE characteristics of three-point-bending concrete beams10.1016/j.cemconres.2003.08.021 ↗
19. Fracture mechanism of quasi-brittle material based on acoustic emission10.1557/JMR.1990.0206 ↗
20. RILEM 50-FMC · Mater Struct · 1985 · 18 · 45
21. Acoustic emission monitoring as a nondestructive testing technique in reinforced concrete
22. Saeki N, Takada N, Nomura N. On studies for cracking and failure of concrete by acoustic emission techniques, In: Rev 33rd general meet [C]. Tokyo: Cement Association of Japan;1979 p. 234.