Developing a Discrete Element Model for simulating fresh concrete: Experimental investigation and modelling of interactions between discrete aggregate particles with fine mortar between them
Source abstract
Abstract
Abstract The article at hand presents an investigation with the objective of developing of a material model for adequate simulation of the rheological behaviour of fresh concrete using the Discrete Element Method (DEM). The methodology for investigation of the interaction between neighbouring particles with some amount of viscoelastic material between them is explained. The experimental investigations were performed with various materials: polymer solutions in water (material with time-independent rheological behaviour) and two types of fresh mortar (with time-dependent rheological behaviours). Characteristic material behaviours for various loading regimes are presented and critically discussed. On the basis of the experimentally obtained force–displacement relations a material model for interaction of neighbouring solid particles in normal direction is developed. This model can be directly introduced in codes based on the Distinct Element Method.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials · Grouting, Rheology, and Soil Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Noor MA, Uomoto T. Three-dimensional discrete element simulation of rheology tests of self-compacting concrete. In: Skarendahl Å, Petersson Ö (editors.). Proceedings of the 1st international RILEM symposium on self-compacting concrete, Stockholm, Sweden. RILEM Publications: Cachan 13–14 September 1999. p. 35–6.
2. Petersson Ö, Hakami H. Simulation of SCC – laboratory experiments and numerical modeling of slump flow and L-box tests. In: Ozawa K, Ouchi M, (editors.). Proceedings of the 2nd international symposium on self-compacting concrete, Coms Engineering Corporation, Tokyo, Japan; 23–25 October 2001. p. 79–8.
3. Kuch H, Palzer S, Schwabe J.-H. Anwendung der simulation bei der verarbeitung von gemengen. In: Finger-Institut für Baustoffkunde FA (editor.) Tagungsbericht der 16. Internationalen Baustofftagung, ibausil, Weimar, Germany. vol. 1. 20–23 September 2006. p. 1321–27. Bauhaus Universität, Weimar.
4. Numerical simulation of fresh SCC flow: applications10.1617/s11527-010-9666-9 ↗
5. Simulating the workability of fresh concrete
6. Self-compacting concrete simulation using Distinct Element Method
7. Capillary holdup between vertical spheres10.1590/S0104-66322009000400008 ↗
8. Capillary cohesion between two spherical glass particles
9. Towards a model for fresh granular-paste systems based on Discrete Element Method
10. Deformation and breakup of stretching bridges of Newtonian and shear-thinning liquids: comparison of one- and two-dimensional models10.1016/S0009-2509(00)00408-5 ↗
11. Adhesion and stiction: Mechanisms, measurement techniques, and methods for reduction10.1116/1.1627336 ↗
12. Adhesion of ultrafine particles – a micromechanical approach10.1016/j.ces.2006.12.055 ↗
13. Liquid bridge force between two unequal-sized spheres or a sphere and a plane10.1016/j.partic.2010.11.006 ↗
14. Carbopol gels: elastoviscoplastic and slippery glasses made of individual swollen sponges: meso- and macroscopic properties, constitutive equations and scaling laws10.1016/j.jnnfm.2007.02.011 ↗
15. Flowability of fibre-reinforced concrete and its effect on the mechanical properties of the material10.1016/j.conbuildmat.2010.02.025 ↗
16. Determination of the rheological parameters of self-compacting concrete matrix using slump flow test
17. Instruction Manual, HAAKE MARS III, Version 1.5.
18. Mechtcherine V, Shyshko S. Virtual concrete laboratory - Continuous numerical modelling of concrete from fresh to the hardened state. Conference on Advances in Construction Materials, Stuttgart, Germany, July 2007, pp. 479-488 http://dx.doi.org/10.1007/978-3-540-72448-3_48.10.1007/978-3-540-72448-3_48 ↗