Statistical research on phase formation and modification of alite polymorphs in cement clinker with SO3 and MgO
Source abstract
Abstract
The design of experiments (DoE) was adjusted in cement clinker chemistry, with alite polymorphisms in the clinker taken into account. The additions of SO3, MgO, as well as two other factors, sintering temperature and time, were included to study clinker formation and alite polymorphisms. XRD quantitative analyses and thermal analysis (DSC–TG) were used to collect quantitative data from the samples and to investigate the clinkerization of the raw meal. The central composition design was used to design the experiments and the response surface methodology was used to evaluate the results. The addition of SO3 inhibited the formation of alite in the clinker, while MgO compensated for any negative effects caused by the SO3. A contour plot interpreted the combination effects of these four factors. The amount of C4AF was then increased with a likewise increasing SO3 content. MgO favored the formation of M3 type alites, while SO3 stabilized the M1. Alite modification, which is related to hydration properties, could be helpful for efficient use of high MgO content calcite in cement production.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Taylor · 1997
2. Effect of MgO and SO3 on the impurity concentration in alite in Portland cement clinker10.1111/j.1151-2916.1992.tb04407.x ↗
3. Factors influencing the phase constitution of alite in Portland cement clinker10.1016/0008-8846(82)90078-3 ↗
4. Effect of magnesium oxide on the properties of cement
5. Formation and microscopic texture of portland cement clinkier mineral. Part 1
6. A comparative study of ordinary and mineralised Portland cement clinker from two different production units. Part I: Composition and hydration of the clinkers10.1016/S0008-8846(03)00115-7 ↗
7. A comparative study of ordinary and mineralised Portland cement clinker from two different production units. Part II: Characteristics of the calcium silicates10.1016/S0008-8846(03)00114-5 ↗
8. Portland cement clinker mineralogical and chemical investigations. Part II: Electron microprobe analysis10.1016/0008-8846(78)90062-5 ↗
9. Microstructure and chemistry of unhydrated cements [and discussion]
10. Innovative, energy-efficient manufacture of cement by means of controlled mineral formation – Part 2
11. Chemistry and engineering of the production process: state of the art10.1016/j.cemconres.2011.03.013 ↗
12. CALPHAD formalism for Portland clinker: thermodynamic models and databases10.1007/s10853-011-5932-7 ↗
13. Marchi M, Costa U, Artioli G. Influence of SO3 and MgO on clinker mineralogical composition: an “in-situ” HTXRD study. In: 12th International Congress on the Chemistry of Cement, Montreal, Canada; 2007.
14. The influence of the alite polymorphism on the strength of the Portland cement10.1016/S0008-8846(02)00756-1 ↗
15. Crystal chemistry and reactivity of the magnesium oxide-stabilized alites10.1111/j.1151-2916.1975.tb18984.x ↗
16. Chemical and structural investigations of mixed crystal formation of tricalcium silicate. III. Combined incorporation of magnesium oxide and aluminum oxide in tricalcium silicate
17. Chemical and structural investigations of solid solutions of tricalcium silicate. IV. Combined incorporation of iron(III) oxide, aluminum oxide, and magnesium oxide into tricalcium silicate
18. Solid solution and hydration behaviour of magnesium-bearing tricalcium silicate phase10.1016/S0008-8846(98)00052-0 ↗
19. Crystal structure of low magnesium-content alite: application to Rietveld quantitative phase analysis10.1016/j.cemconres.2008.06.005 ↗
20. Modeling of cryogenic frictional behaviour of titanium alloys using response surface methodology approach10.1016/j.matdes.2009.05.020 ↗
21. Comparison of response surface model with neural network in determining the surface quality of moulded parts10.1016/j.matdes.2005.09.004 ↗
22. Statistical study of cement additives with and without chloride on performance modification of Portland cement10.1016/S1002-0071(12)60038-0 ↗
23. Formulation design of the multi-component cement additive by using engineering statistics10.1007/s11595-030-0039-6 ↗
24. Modeling, analysis of interaction effects of several chemical additives on the strength development of silicate cement10.1016/j.conbuildmat.2010.04.007 ↗
25. Formulations of sulfobelite cement through design of experiments10.1016/j.conbuildmat.2011.03.032 ↗
26. Characterization of the Tunisian blast-furnace slag and its application in the formulation of a cement10.1016/j.cemconres.2003.12.021 ↗
27. High volume limestone alkali-activated cement developed by design of experiment10.1016/j.cemconcomp.2011.11.004 ↗
28. Models relating mixture composition to the density and strength of foam concrete using response surface methodology10.1016/j.cemconcomp.2006.06.001 ↗
29. Assessment of properties of recycled concrete by means of a highly fractioned factorial design of experiment10.1016/j.conbuildmat.2011.04.039 ↗
30. Mixture design of high performance recycled liquid crystal glasses concrete (HPGC)10.1016/j.conbuildmat.2011.04.012 ↗
31. A new mix design concept for earth-moist concrete: a theoretical and experimental study10.1016/j.cemconres.2008.04.002 ↗
32. Montgomery · 2008
33. Phase identification of alite in portland cement clinker10.1016/0008-8846(82)90103-X ↗
34. Polymorphism of tricalcium silicate in Portland cement: a fast visual identification of structure and superstructure10.1154/1.1523079 ↗