journal article·2009-02

Effects of environmental factors on the adhesion and durability characteristics of epoxy-bonded concrete prisms

Adnan Çolak, Turgay Çoşgun, Ahmet E. Bakırcı

Publisher page

Abstract

Abstract This work is concerned with the effects of environmental factors on the adhesion and durability characteristics of epoxy-bonded concrete prisms. The results indicate that the presence of liquid water at the interfacial zone during the epoxy injection process disrupts the initial bond configurations. The freezing and thawing up to about 40 cycles do not have a significant effect on the bond stability. An adequate degree of chemical stability is maintained in the bond line by the epoxy adhesives after 120 days of exposure to corrosive environments such as MgSO4 and MgCl2. However, there is a pronounced effect of these chemical substances on the concrete strength. The load-bearing capacity of epoxy-bonded concrete prisms decreases with increasing temperature. Despite this fact, the EP3-bonded concrete prisms give relatively high joint strengths at temperatures up to 100 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Epoxy Resin Curing Processes · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Surf Properties
2. Griffith · Adv Chem Ser · 1970 · 92 · 810.1021/ba-1970-0092.ch002 ↗
3. Griffith · Adv Chem Ser · 1971 · 99 · 47110.1021/ba-1971-0099.ch029 ↗
4. Griffith · Chemtech · 1972 · 311
5. Griffith · Chemtech · 1982 · 290
6. Johncock · Br Polym J · 1983 · 15 · 1410.1002/pi.4980150105 ↗
7. Barrie · Polymer · 1985 · 26 · 116710.1016/0032-3861(85)90246-0 ↗
8. Goobich · Polym Eng Sci · 1982 · 22 · 105210.1002/pen.760221608 ↗
9. Epoxy resin adhesives
10. Shaw · 1988
11. Gledhill · J Adhes · 1980 · 11
12. Plueddemann · 1982
13. Kinloch · 1975
14. Gledhill · Int J Adhesion Adhesives · 1990 · 10 · 19210.1016/0143-7496(90)90103-5 ↗
15. Silanes as the interphase in adhesive bonds10.1163/156856192X00025 ↗
16. Comyn · 1986 · 269
17. Investigation of steel epoxy adhesion durability using polymeric coupling agents. 2 Factors affecting adhesion durability10.1080/00218468808071252 ↗
18. Surface-treatment and analysis for adhesive bonding10.1016/0143-7496(90)90099-J ↗
19. Effect of surface treatment on the durability of aluminium joints bonded with a butadiene-acrylonitrile-epoxide sealant10.1016/S0143-7496(99)00022-6 ↗
20. Surface preparation for adhesives
21. Preparing concrete surfaces for coatings
22. Influence of surface preparation on long-term bonding of shotcrete
23. Influence of hydrochloric acid etching on bond strength between concrete substrate and repair materials10.1016/S0958-9465(02)00123-3 ↗
24. Durability of aliminium-sealant joints in jet-fuel, water, and antifreeze10.1016/S0143-7496(97)00006-7 ↗
25. Kinetics and mechanism of environmental attack
26. Pitrone LR, Brown SR, Environmental durability of adhesively bonded joints. In: Johnson WS, editor. Adhesively bonded joints: testing, analysis and design. ASTM STP, vol. 981, p. 289, 1988.10.1520/STP30343S ↗
27. The role of the interphase in the environmental failure of adhesive joints10.1016/S1359-6454(00)00240-8 ↗
28. Water effects on the bond strength of concrete/concrete adhesive joints10.1016/j.conbuildmat.2005.06.015 ↗
29. Environmental effects on epoxy adhesives employed for restoration of historical buildings10.1061/(ASCE)0899-1561(2006)18:5(715) ↗
30. Long-term durability in water of aluminium alloy adhesive joints bonded with epoxy adhesives10.1016/S0143-7496(96)00038-3 ↗
31. Environmental ageing of adhesively-bonded joints II. Mechanical studies10.1080/00218469708014574 ↗
32. Sonawala · J Mater Sci · 1996 · 31 · 474510.1007/BF00355857 ↗
33. Effects of water, salt solution and simulated concrete pore solution on the properties of composite matrix resins used in civil engineering applications10.1002/pc.10538 ↗
34. The bond between repair materials and concrete substrate in marine environment
35. Seymor · 1982
36. Adhesion and durability characteristics of concrete prisms repaired by methyl methacrylate resin injection
37. Buck BI and Hockney MGD. Aspects of Adhesion-7, Allen KW, and Alner DJ editors, London: Transcription Books; 1973.
38. Butt · J Adhesion · 1976 · 8 · 1110.1080/00218467608075067 ↗
39. Bonding of aluminum-alloy with some phenolic adhesives and a modified epoxide adhesive and strength changes on exposure to moist air at 50°C10.1080/00218468708074959 ↗
40. Bolger JC. Adhesion and Adhesives, Patrick RL, editor, Vol. 3. New York: Marcel Dekker; 1973.
41. Effect of moisture and temperature on the properties of high temperature adhesives
43. The durability of some epoxide adhesive-bonded joints on exposure to moist warm air10.1016/0143-7496(80)90032-9 ↗
44. Blistering of glass-epoxy amine adhesive joints in water--vapor at high-pressure---an indication of interfacial crumpling10.1080/00218469408027091 ↗
45. Parker BM, Shaw SJ. Defense research agency report. DRS/SMC/CR951184, October 1995.
46. Cotter · 1977
47. French · Compos Sci Technol · 1992 · 45 · 25710.1016/0266-3538(92)90087-J ↗
48. The temperature dependence of some mechanical properties of a cured epoxy resins system10.1002/pen.760251305 ↗
49. Marceau · Adhes Age · 1977 · 20 · 28
50. Tang M-S, Liu Z, Han S-F, Mechanism of alkali-carbonate reaction. In: Proceedings of the 7th international conference on the concrete alkali–aggregate reaction, Noyes, New Jersey, 1994. p. 275–9.
51. Alkali-Carbonate rock reaction
52. Alkali reactivity of dolomitic limestone aggregate10.1680/macr.1967.19.59.95 ↗
53. The effects of deicing salts on aggregate durability
54. Resistance of Portland cement mortar to chemical attack—a progress report
55. The effect of deicing chemical on reinforced concrete
56. Effect of temperature and superimposed dynamic and static stresses on mechanical properties of epoxy-bonded joints10.1007/BF00612412 ↗
57. Effect of radiation on some mechanical properties of an epoxy system
58. Plecnik JM, Plecnik J, Diba A, Howard J, Hiremagular J. Fire research on seismically damaged concrete beams repaired with epoxy adhesives. Final report, Contract No. PFR-7927222, Washington, DC: National Science Foundation, 1983.
59. Fire testing epoxies
60. ACI Committee 224. Causes, evaluation and repair of cracks in concrete, ACI Mater J.1984;81:211–30.10.14359/10678 ↗
61. Rim formation on Iowa highway concrete dolomite aggregate, the effect of dedolomitization reactions10.2113/gseegeosci.II.1.59 ↗
62. Spry PG, Gan G-L, Cody RD, Cody AM. The formation of rims on dolomite aggregate in Iowa highway concrete. In: Proceedings of the semisequicentennial transportation conference celebrating the 75th anniversary of the Transportation Research Board, 1996.
63. Alkali reactivity of carbonate rocks, expansion and dedolomization
64. Mechanism and kinetic of expansion in alkali—carbonate rock reaction10.1139/e64-007 ↗
65. Chemical characteristics of some carbonate aggregates as related to durability of concrete
66. Relationship of physical properties of some Iowa carbonate aggregates to durability of concrete
67. The effects of deicing salt on aggregate durability
68. Alkali-cabonate reactions and pH value. II
69. Mechanism of dedolomitization and expansion of dolomite rocks10.1016/0008-8846(93)90077-M ↗
70. Oberste-Padtberg R., Degradion of cements by magnesium brine: a microscopic study. In: Proceedings of the 7th international conference on cement microscopy, Ft. Worth, Texas, 1985. p. 24–36.
71. Maxwell · Ind Eng Chem · 1949 · 41 · 198810.1021/ie50477a036 ↗
72. Regel VR. Zhur Tekh Fiz 1951;21:287; CA, 1953;47:9049d.
73. Regel VR, Nedoshivin YN. Zhur Tekh Fiz 1953;23:1333; CA, 1955;49:3573c.
74. ACI Committee 548. Guide for the use of polymers in concrete. ACI J 1986:798–829.
75. Guide for the selection of polymer adhesives with concrete
76. Dansk Standard. Danish Standards Association, Repair of concrete structures to EN 1504, Technology & Engineering, 2004.10.1201/b12846 ↗
77. Structural applications of adhesives in civil engineering10.1179/mst.1985.1.11.937 ↗
78. Grosskurt KP, Perbix W. Improvement in the durability of cracked concrete elements injected with synthetic resin by optimizing the bond behavior, adhesion between polymers and concrete. In: Proceedings of an international symposium organized by RILEM Technical Committee 52, France, September, 16--19, 1986. p. 403–10.10.1007/978-1-4899-3454-3_40 ↗
79. Use of high molecular weight methacrylate for repairing cracks in concrete
80. The repair of cracked concrete with high molecular weight methacrylate monomers
81. Bond strength of patch repair mortars for concrete
82. Resin injection of cracks with changing width
83. Commercial applications and property requirements for epoxies in construction
84. Dinitz AM, Ferri R. Polymer concrete (MMA) for bridge rehabilitation applications. In: Dikeou JT, Fowler DW, editors. Polymer concrete: uses, materials and properties. SP-89, American Concrete Institute, Farmington Hills (MI), 1985. p. 141–59.
85. Kushner RG, Fowler DW, Wheat DL. Mechanical and durability properties of a high molecular weight methacrylate polymer concrete. In: Fowler DW, editor. Polymer modified concrete SP-99. American concrete Institute, Farmington Hills (MI), 1987. p. 113–34.
86. Stratton F, McCollem Wayne, Bruce F. Repair of hollow or softened areas in bridge decks by rebonding with injected epoxy resin or other polymers. Report no. K-F-72-5, State Highway Commission of Kansas, Topeka, 1974.
87. State-of-the art adhesives for concrete construction
88. Kansas Bridges renovated by post reinforcement and thin bonded concrete overlay
89. Stress-cracking
90. Barish · J Appl Polym Sci · 1962 · 6 · 61710.1002/app.1962.070062403 ↗
91. Elbers · Kunststoffe · 1960 · 50 · 485
92. Heiss · Wire Wire Products · 1958 · 33 · 1182
93. Inoue · J Polym Sci · 1961 · 55 · 44310.1002/pol.1961.1205516203 ↗
94. Van Schooten · J Appl Polym Sci · 1960 · 4 · 12210.1002/app.1960.070041023 ↗
95. Doll · Kunststoffe · 1961 · 51 · 358
96. Gilbert · Plastics (London) · 1958 · 23 · 282
97. Hawkins · J Polym Sci · 1959 · 41 · 110.1002/pol.1959.1204113801 ↗
98. Kafavian · J Polym Sci · 1957 · 24 · 49910.1002/pol.1957.1202410725 ↗
99. Comyn · 1981
100. Permeability and chemical resistance