Flexural displacement response of NSM FRP retrofitted masonry walls
Source abstract
Abstract
Abstract Fifteen clay brick masonry wall tests were conducted to study the behaviour of near-surface-mounted (NSM) carbon fibre reinforced polymer (CFRP) retrofitted masonry walls in flexure. All walls were simply-supported along their top and bottom edges and tested in vertical one-way bending under three- and four-point bending and failed by intermediate crack debonding. The results of these experimental tests indicate that: (1) reverse cyclic loading and axial pre-compression had little effect on wall load–deflection response; (2) FRP strip spacing and reinforcement ratio strongly influenced wall response; and (3) for a constant reinforcement ratio, smaller strips at closer spacing gave better wall strength and displacement response.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Performance of unreinforced masonry buildings during the 2010 Darfield (Christchurch, NZ) earthquake10.1080/13287982.2010.11465067 ↗
2. Failure characteristics of FRP strengthened masonry walls under out-of-plane loads10.1016/j.engstruct.2010.03.016 ↗
3. Bond behaviour of FRP-to-clay brick masonry joints10.1016/j.engstruct.2009.06.006 ↗
4. Bond behaviour of NSM FRP strips bonded to modern clay brick masonry prisms: influence of strip orientation and compression perpendicular to the strip10.1061/(ASCE)1090-0268(2009)13:3(169) ↗
5. Near-surface mounted FRP reinforcement – an emerging technique for strengthening structures10.1016/j.compositesb.2006.08.003 ↗
6. Out-of-plane strength of brick masonry retrofitted with horizontal NSM CFRP strips10.1016/j.engstruct.2009.10.015 ↗
7. Rehabilitation of masonry walls using unobtrusive FRP techniques for enhanced out-of-plane seismic resistance10.1061/(ASCE)1090-0268(2006)10:3(213) ↗
8. Strengthening of unreinforced masonry walls using FRPs10.1061/(ASCE)1090-0268(2001)5:2(76) ↗
9. Field assessment of unreinforced masonry walls strengthened with fiber reinforced polymer laminates10.1061/(ASCE)0733-9445(2003)129:8(1047) ↗
10. Out-of-plane strengthening of unreinforced masonry walls with openings10.1061/(ASCE)1090-0268(2004)8:4(298) ↗
11. Strengthening with FRP bars of URM walls subject to out-of-plane loads10.1016/j.conbuildmat.2005.06.047 ↗
12. Out-of-plane flexural behavior of unreinforced red brick walls strengthened with FRP composites10.1016/j.compositesb.2006.07.019 ↗
13. Teng · 2002
14. Embedding NSM FRP plates for improved IC debonding resistance10.1061/(ASCE)1090-0268(2008)12:6(635) ↗
15. In-situ testing of a low intervention NSM seismic strengthening technique for historic URM buildings
16. Standards Australia, AS 3700-2001: masonry structures, Sydney; 2001. p. 212.
17. Standards Australia. AS/NZS 4456.15-2003: masonry units and segmental pavers – methods of test, method 15: determining lateral modulus of Rupture, Sydney; 2003.
18. Debonding resistance of FRP-to-masonry joints10.1016/j.engstruct.2012.03.032 ↗