journal article·2013-12

Implementing fractional viscoelastic model to evaluate low temperature characteristics of crumb rubber and gilsonite modified asphalt binders

Pouria Hajikarimi, Sassan Aflaki, Alireza Sadat Hosseini

Publisher page

Abstract

Abstract In this paper, utilizing the bending Beam rheometer (BBR) test, low temperature rheological properties of asphalt binders which are modified by crumb rubber and gilsonite are investigated. For this purpose, the BBR test was performed on asphalt binder samples containing different extent of modifiers at five temperatures: −6, −12, −18, −24 and −30 °C. In order to interpret results of the BBR test, the general power law is implemented to describe the relation of creep compliance and time which is the main result of the BBR test. It is shown that using the general power law leads to a simple fractional model which could be an appropriate alternative in comparison with the other conventional models such as the Burgers model or the generalized Maxwell model. Besides using the SuperPAVE Performance Grading (PG) protocol, parameters of the simple fractional model are used to evaluate the performance of asphalt binders at low service temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Rheology and Fluid Dynamics Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. A historical review of additives and modifiers used in paving asphalt refining processes in the United States10.1080/15459620903248994 ↗
2. Implementing viscoelastic rheological methods to evaluate low temperature performance of modified asphalt binders10.1016/j.conbuildmat.2012.04.076 ↗
3. Proposals for modification of Iranian bitumen to meet the climatic requirements of Iran10.1016/j.conbuildmat.2008.12.014 ↗
4. Field performance of modified asphalt binders evaluated with superpave test methods: I-80 test project10.3141/1661-10 ↗
5. Fatigue and permanent deformation models for polymer-modified asphalt mixtures10.3141/1767-17 ↗
6. Comparing effects of bio-binder with other asphalt modifiers on low temperature characteristics of asphalt
7. Petersen JC, Robertson RE, Branthaver JF, Anderson DA, Christiansen DW, Bahia HU, et al. Binder characterization and evaluation. vol. 4: Test methods. Strategic highway research program; 1994.
8. ASTM-D6648. Standard test method for determining the flexural creep stiffness of asphalt binder using the Bending Beam Rheometer (BBR); 2001.
9. the bending beam rheometer; a simple device for measuring low-temperature rheology of asphalt binders
10. Analysis and application of relationships between low-temperature rheological performance parameters of asphalt binders10.1016/j.conbuildmat.2009.10.015 ↗
11. Wang · 2011
12. Ottosen · 2005
13. Visco-elastic behavior through fractional calculus: an easier method for best fitting experimental results10.1016/j.mechmat.2011.08.016 ↗
14. Experimental validation of a fractional model for creep/recovery testing of asphalt mixtures10.1016/j.conbuildmat.2012.04.028 ↗
15. Polymer engineering science and viscoelasticity
16. Generalized viscoelastic models: their fractional equations with solutions10.1088/0305-4470/28/23/012 ↗
17. Investigation of asphalt binder containing various crumb rubbers and asphalts. Special section on recycling wastes for use as construction materials10.1016/j.conbuildmat.2012.11.063 ↗
18. Laboratory comparison of the crumb-rubber and SBS modified bitumen and hot mix asphalt10.1016/j.conbuildmat.2011.03.005 ↗
19. Laboratory evaluation of crumb rubber modified asphalt mixes10.1061/(ASCE)0899-1561(2004)16:1(45) ↗
20. Interaction effects of crumb rubber modified asphalt binders10.1016/j.conbuildmat.2009.10.024 ↗
21. Using two-way ANOVA and hypothesis test in evaluating crumb rubber modification (CRM) agitation effects on rheological properties of bitumen10.1016/j.conbuildmat.2010.11.028 ↗
22. Laboratory evaluation on high temperature viscosity and low temperature stiffness of asphalt binder with high percent scrap tire rubber10.1016/j.conbuildmat.2011.06.061 ↗
23. The effect of crumb rubber modifier on the resistance of asphalt mixes to plastic deformation10.1016/j.matdes.2012.12.022 ↗
24. Analysis of digestion time and the crumb rubber percentage in dry-process crumb rubber modified hot bituminous mixes10.1016/j.conbuildmat.2010.11.029 ↗
25. Bahia HU, Hanson DI, Zeng M, Zhai H, Khatri MA, Anderson RM. Characterization of modified asphalt binders in superpave mix design. National Cooperative Highway Research Program; 2001.
26. Evaluation of high temperature performance of SBS+Gilsonite modified binder10.1016/j.fuel.2011.05.021 ↗