journal article·2010-11

Analysis of adhesive joints used to bond FRP laminates to steel members – A numerical and experimental study

Reza Haghani

Publisher page

Abstract

Abstract The strengthening of existing structures using bonded fiber reinforced polymer laminates has attracted a great deal of attention in recent years. However, when compared with concrete structures, the application of this method for strengthening structural steel members is somewhat limited. This is mainly due to the lack of an established design code for treating FRP-strengthened members. Issues such as the complexity of failure modes and the lack of knowledge of the force-transfer mechanism are obstacles that contribute to the difficulty associated with developing accurate design models. A few studies have underlined the need for new design approaches to strengthening steel members, since the existing design methods are not accurate enough. The first step towards developing new design models is to study these adhesive joints. This paper deals with analyses of adhesive joints used to bond CFRP laminates to steel substrates using a numerical and experimental approach. A numerical study of joints has been made utilizing the FE method, while, in the experimental part of the study, an optic measurement technique has been used. Different aspects of joint behavior, such as strain distributions along the bond line and through the thickness of the adhesive layer and failure mechanisms are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Mechanical Behavior of Composites · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Repair of steel composite beams with carbon fiber-reinforced polymer plates10.1061/(ASCE)1090-0268(2004)8:2(163) ↗
2. Bassetti A. Lamelles precontraintes en fibres de carbone pour renforcement de ponts rivetes endommages par fatigue. Thesis no 2440, EPFL, Lausanne, Switzerland; 2001.
3. Prediction of debonding strength of tensile steel/CFRP joints using fracture mechanics and stress based criteria10.1016/j.engfracmech.2008.10.005 ↗
4. Progress on understanding debonding problems in reinforced concrete and steel members strengthened using FRP composites10.1016/S0950-0618(03)00094-1 ↗
5. Cadei JMC, Statford TJ, Hollaway LC, Duckett WG. Strengthening metallic structures using externally bonded fiber-reinforced polymers. CIRIA; 2004 [ISBN 0-86017-595-2].10.1533/9781845690649.7.693 ↗
6. CNR-DT 202/2005. National research council, Advisory committee on technical recommendations for construction. Guidelines for the design and construction of externally bonded FRP systems for strengthening existing structures, metallic structures; 2005.
7. Analysis of cracked steel members reinforced by pre-stress composite patch10.1046/j.1460-2695.2003.00598.x ↗
8. The stresses in cemented joints10.1115/1.4009336 ↗
9. Haghani R, Al-Emrani M, Kliger R. Control of interfacial stresses in beams strengthened with prestressed CFRP laminates. In: Proceedings of the Asia-Pacific conference on FRP in structures (APFIS), Hong Kong, China; 2007. p. 1053–60.
10. Stress distribution in adhesive joints with tapered laminates – effect of tapering length and material properties10.1177/0021998309345320 ↗
11. Institution of Structural Engineers. A guide to the structural use of adhesives. London, UK; 1999.
12. CFRP strengthened butt-welded very high strength (VHS) circular steel tubes10.1016/j.tws.2004.03.003 ↗
13. Linghoff D. Steel members strengthened with carbon fiber reinforced polymers A study of local and global structural behavior. Doctoral thesis. Chalmers University of Technology, Sweden; 2009.
14. Carbon–fibre composites for strengthening steel structures10.1016/j.tws.2008.10.019 ↗
15. Luke S. The use of carbon fibre plates for strengthening of two metallic bridges in an historic nature in the UK. In: Proceedings of the international conference on FRP composites in civil engineering, Hong Kong; 2001. p. 975–83.
16. Mertz DR, Gillespie JW. Rehabilitation of steel bridge girders through the application of advanced composite materials, IDEA program. Transportation Research Board National Research Council (NCHRP), University of Delaware; 1996.
17. Strengthening of steel bridge girder using CFRP plates10.1061/(ASCE)1084-0702(2001)6:6(514) ↗
18. Schnerch D., Dawood M, Rizkalla S. Design guidelines for use of HM strips: strengthening of steel concrete composite bridges with high modulus carbon fiber reinforced polymer (CFRP) strips; 2006.
19. Strengthening steel bridge sections using CFRP laminates10.1016/S1359-8368(01)00006-3 ↗
20. Interfacial stresses in plated beams10.1016/S0141-0296(00)00090-0 ↗
21. Strengthening of steel–concrete composite girders using carbon fiber reinforced polymer sheets10.1061/(ASCE)0733-9445(2003)129:1(30) ↗