Comparison of permeable friction course mixtures fabricated using asphalt rubber and performance-grade asphalt binders
Source abstract
Abstract
Abstract Permeable friction course mixtures (PFC) are special hot mix asphalt (HMA) mixtures that are designed to improve motorist safety and reduce traffic noise (i.e., tire–pavement noise). In terms of pavement structural design and construction, PFC mixtures are typically used as the surfacing course layer where in addition to improving the skid resistance, also serve as the surface drainage layer. This paper compares PFC mixtures designed and fabricated using performance grade (PG) and asphalt rubber (AR) asphalt-binders (or asphalts). The experimental design included assessment of total air voids (AV) content, durability, drainability, stone-on-stone contact, and internal structure of the PFC mixtures fabricated using both AR and PG asphalts; denoted herein as AR–PFC and PG–PFC mixtures, respectively. The analysis conducted provided evidence of differences between AR–PFC and PG–PFC mixtures that suggest the need for differentiation and refinement of the existing specifications to consider these mixtures as independent materials. Future research should, therefore, focus on defining particular specifications for mix design and control for AR–PFC and PG-PFC mixtures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Railway Engineering and Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Stone-on-stone contact of permeable friction course mixtures10.1061/(ASCE)MT.1943-5533.0000117 ↗
2. Alvarez AE, Epps Martin A, Estakhri C, Button JW, Glover C, Jung SH. Synthesis of current practice on the design, construction, and maintenance of porous friction courses. Report no. FHWA/TX-06/0-5262-1. Texas Transportation Institute-Texas A&M University, College Station, TX; 2006.
3. TxDOT. Standard specifications for construction and maintenance of highways, streets, and bridges. Austin, TX; 2004.
4. TxDOT. 200-F, Bituminous test procedures manual. Austin, TX; 2005.
5. A review of mix design and evaluation research for permeable friction course mixtures10.1016/j.conbuildmat.2010.09.038 ↗
6. Lu Q, Harvey JT. Laboratory evaluation of open-graded asphalt mixes with small aggregates and various binders and additives. Transportation Research Board 90th Annual Meeting Transportation Research Board, Washington DC, 2011, p. 1–18.10.3141/2209-08 ↗
7. Determination of volumetric properties for permeable friction course mixtures10.1520/JTE101696 ↗
8. InstroTek®. Corelok® operator’s guide. Version 20. InstroTek Inc., Raleigh, NC; 2003, p. 20.
9. Connected air voids content in permeable friction course mixtures10.1520/JTE102056 ↗
10. TxDOT. TxDot – online manuals. TxDOT; 2011.
11. Porous asphalt mixtures in Spain
12. Evaluation of durability tests for permeable friction course mixtures10.1080/10298430902730539 ↗
13. Walubita LF. Comparison of fatigue analysis approaches for predicting fatigue lives of hot-mix asphalt concrete (HMAC) mixtures. College Station, TX. PhD dissertation, Texas A&M University; 2006.
14. Zhou F, Scullion T. Overlay tester: a simple and rapid screening test for characterizing crack resistance of HMA mixes.In: 10th international symposium of asphalt pavements-ISAP, Quebec, Canada; 2006.
15. Walubita LF, Scullion T. Texas perpetual pavements – new design guidelines. Report FHWA/TX-05/0-4822-P6. Texas Transportation Institute-Texas A&M University; 2010.
16. Walubita LF, Liu W, Scullion T. Texas perpetual pavements – experience overview and the way forward. Technical report 0-4822-3. Texas Transportation Institute, Texas A&M University, College Station, TX; 2010.
17. ASTM International. ASTM PS 129-01: standard provisional test method for measurement of permeability of bituminous paving mixtures using a flexible wall permeameter. ASTM International, West Conshohocken, PA; 2001, p. 1–5.
18. Alvarez AE, Epps Martin A, Estakhri C, Button JW, Kraus Z, Prapaitrakul N, Glover C. Evaluation and recommended improvements for mix design of permeable friction courses. Report no. FHWA/TX-08/0-5262-3. Texas Transportation Institute-Texas A&M University, College Station, TX; 2008.
19. Kandhal · 2002
20. ASTM International. ASTM D 7064-04: standard practice for open-graded friction course (OGFC) mix design. ASTM International, West Conshochocken, PA; 2006, p. 937–43.
21. Permeability and volumetrics of porous asphalt concrete, a theoretical and experimental investigation
22. Laboratory performance testing of open-graded friction course mixtures. Transportation research record10.3141/1891-06 ↗
23. Effects of densification on permeable friction course mixtures10.1520/JTE101808 ↗
24. Internal structure of compacted permeable friction course mixtures10.1016/j.conbuildmat.2009.11.015 ↗
25. X-ray computed tomography of aggregates and asphalt mixes
26. Nondestructive measurements of moisture transport in asphalt mixtures
27. Walubita LF, Jamison B, Alvarez AE, Scullion T. Air void characterization of hot mix asphalt gyratory laboratory-molded samples and field cores using X-ray computed tomography (X-ray CT). J S Afr Institution of Civil Eng, submitted for publication.
28. The heterogeneity and mechanical response of hot mix asphalt laboratory specimens10.1080/10298430902730521 ↗