journal article·2010-11

Effect of time span between mixing and compacting on roller compacted concrete (RCC) containing ground granulated blast furnace slag (GGBFS)

A. Karimpour

Publisher page

Abstract

Abstract Considerable development of roller compacted concrete (RCC) in different fields of construction such as dam construction, motivated researchers to study the effect of different parameters on the properties of RCC accurately. The time span between the beginning of mixing the materials until the time of finishing compacting, is one of the parameters effecting the RCC properties. In this paper, effect of changing the time span between mixing and compacting on the mechanical properties of conventional concrete and RCC containing ground granulated blast furnace slag (GGBFS) was studied. Results shows that the greater the delay in compacting, increased the loss in conventional concrete properties, but by using GGBFS as a part of the cementitious material, more delay in compacting not only does not cause the loss of properties, but, in some conditions, improved the concrete compressive strength, permeability, absorption and adsorption.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. ACI Committee 233. Ground granulated blast-furnace slag as a cementitious constituent in concrete. (ACI 233R-95). American Concrete Institute: Farmington Hills, Mich; 1995.
2. Aitcin PC. High-performance concrete. E&FN Spon; 1998.
3. ASCE. Roller compacted concrete technical engineering and design guide as adapted from the US army corps of engineers, no. 5. American Society of Civil Engineers; 1994.
4. Dasmeh A, Fakher A, Shekarchi M, Gharavy M. The influence of compaction time on the mechanical properties of RCC. Hydropower and Dam 2000 [Issue Three].
5. Gharavi M. Optimization of compacting time with the effects of different pozzolans (type and dosage) on the mechanical properties of RCC. In: Fourth international symposium on roller compacted concrete (RCC) dams, Madrid, Spain; 2003.
6. Hewlett · 1998
7. Odler I. Special inorganic cement. E&FN Spon; 2000.
8. Mehta · 1993
9. How the water-cement ratio affects concrete strength
10. Neville · 1995
11. ASTM C39. Standard test method for compressive strength of cylindrical concrete specimens.
12. ASTM C109. Standard test method for compressive strength of hydraulic cement mortars.
13. ASTM C127. Standard test method for density, relative density (specific gravity), and absorption of coarse aggregate.
14. ASTM C128. Standard test method for density, relative density (specific gravity), and absorption of fine aggregate.
15. ASTM C191. Standard test methods for time of setting of hydraulic cement by Vicat needle.
16. ASTM C204. Standard test methods for fineness of hydraulic cement by air-permeability apparatus.
17. ASTM C150. Standard specification for Portland cement.
18. USBR 4906. Casting no-slump concrete in cylinder molds using vibratory table.
19. USBR 4913. Procedure for water permeability of concrete.
20. USBR. Roller compacted concrete, design and construction consideration for hydraulic structures. Technical Service Center; 2005.
21. CRD-C 53. Test method for consistency of no-slump concrete using the modified Vebe apparatus.