Identification of set-accelerator for enhancing the productivity of foam concrete block manufacture
Source abstract
Abstract
Abstract Foam concrete is suitable for producing lightweight blocks. This paper deals with identification of suitable set accelerator for foam concrete made using sodium lauryl sulphate as foaming agent, i.e. facilitating demoulding within 2 h and also economical. As conventional accelerators, viz., calcium chloride, calcium nitrate, triethanol amine were not-effective in foam concrete, alum and Class-C fly ash were tried. Demoulding test was performed to the mixes having optimum density (1200–1300 kg/m 3 ). Class-C fly ash was observed as a potential set-accelerator, facilitating demoulding at 90 min.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Materials Engineering and Processing · Tunneling and Rock Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Porosity and permeability of foam concrete10.1016/S0008-8846(01)00490-2 ↗
2. Nambiar EKK. Influence of composition and pore parameters on properties of preformed foam concrete. PhD thesis, IIT Madras, India; 2006.
3. Ranjani GIS. Investigations on the behavior of preformed foam concrete using two synthetic surfactants as foaming agent. Ph.D. thesis, IIT Madras, India; 2011.
4. Neville · 2011
5. ACI Committee 212. Chemical admixtures for concrete (ACI 212.3R-91). Detroit: American Concrete Institute; 1999. p. 10–4.
6. Ramachandran · 2002
7. Technical calcium nitrate as set accelerator for cement at low temperatures10.1016/0008-8846(95)00172-7 ↗
8. Effect of some admixtures on setting time and strength evolution of cement paste at early ages10.1016/j.conbuildmat.2006.05.043 ↗
9. Dodson · 1990
10. Hydration of cement – role of triethanolamine10.1016/0008-8846(76)90026-0 ↗
11. Rheological properties of cement paste admixed with some alkanolamines10.1016/S0008-8846(02)00911-0 ↗
12. Lithium salt as set accelerator for refractory concretes: correlations of chemical properties with setting time
13. Effect of calcium formate on the hydration of tricalcium silicate10.1016/0008-8846(83)90050-9 ↗
14. Relative assessment of density and stability of foam produced with four synthetic surfactants10.1617/s11527-010-9582-z ↗
15. Mixed calcium salts of soaps and anionic detergents10.1021/ie50408a020 ↗
16. Mechanisms of acceleration by calcium chloride: a review10.1520/JTE10660J ↗
17. The influence of ethanolamines on the hydration and mechanical properties of Portland cement10.1016/S0008-8846(96)85007-1 ↗
18. Watanabe Y et al. Process for producing a concrete product. U.S. Patent 6126875; 2000.
19. The hydraulic activity of high calcium fly ash10.1007/s10973-005-6970-7 ↗
20. Self-cementitious properties of fly ashes from CFBC boilers co-firing coal and high sulphur petroleum coke10.1016/j.cemconres.2007.03.013 ↗