Properties of partition wall blocks prepared with high percentages of recycled clay brick after exposure to elevated temperatures
Source abstract
Abstract
Abstract High temperature properties of partition wall concrete blocks prepared with recycled clay brick aggregate derived from construction and demolition (C&D) waste streams (e.g. collapsed masonry after an earthquake) were studied. For this purpose three series of concrete block mixes were designed using coarse and fine clay brick aggregate to replace recycled concrete aggregate and sand at percentages of 25%, 50% 75% and 100%. The residual density, mass loss, compressive and flexural strengths after exposure to elevated temperatures of 300 °C, 500 °C and 800 °C were determined. The results demonstrated that selection of an appropriate replacement for both coarse and fine clay brick aggregates can lead to better performance of the blocks at elevated temperatures. It is expected therefore that there will be significant advantages in terms of sustainability and fire safety by adopting this inherent fire-resistant material in concrete blocks especially for low rise residential developments.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Use of aggregates from recycled construction and demolition waste in concrete10.1016/j.resconrec.2006.05.010 ↗
2. Statistical analysis on building waste in Wenchuan earthquake-hit area
3. China Earthquake: LIVE UPDATES. 2013-04-21, 9:33 GMT. [retrieved 25.04.13].
4. The contribution of environmental management systems to the management of construction and demolition waste: the case of the Autonomous Community of Madrid (Spain)10.1016/j.resconrec.2006.06.008 ↗
5. Recycling of construction and demolition waste via a mechanical sorting process10.1016/S0921-3449(02)00053-8 ↗
6. A dynamic model for assessing the effects of management strategies on the reduction of construction and demolition waste10.1016/j.wasman.2011.11.006 ↗
7. Generation and management of construction and demolition waste in Greece—an existing challenge10.1016/S0921-3449(03)00035-1 ↗
8. Application of recycled coarse aggregate by mixture to concrete construction10.1016/j.conbuildmat.2005.12.023 ↗
9. Mechanical behaviour of concrete made with fine recycled concrete aggregates10.1016/j.cemconcomp.2006.12.004 ↗
10. Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete10.1016/j.cemconres.2007.02.002 ↗
11. Durability performance of concrete made with fine recycled concrete aggregates10.1016/j.cemconcomp.2009.09.005 ↗
12. Properties of self-compacting concrete prepared with coarse and fine recycled concrete aggregates10.1016/j.cemconcomp.2009.06.005 ↗
13. Use of recycled aggregates in moulded concrete bricks and blocks10.1016/S0950-0618(02)00019-3 ↗
14. Properties of concrete blocks prepared with low grade recycled aggregates10.1016/j.wasman.2009.02.018 ↗
15. Paving blocks made with recycled concrete aggregate and crushed clay brick10.1016/j.conbuildmat.2005.01.044 ↗
16. Use of wastes derived from earthquakes for the production of concrete masonry partition wall blocks10.1016/j.wasman.2011.04.010 ↗
17. Effects of recycled fine glass aggregates on the properties of dry-mixed concrete blocks10.1016/j.conbuildmat.2012.09.017 ↗
18. The behavior of masonry walls subjected to fire: modelling and parametrical studies in the case of hollow burnt-clay bricks10.1016/j.firesaf.2008.12.006 ↗
19. Performance of brick aggregate concrete at high temperatures10.1061/(ASCE)0899-1561(2004)16:6(556) ↗
20. Residual strength and pore structure of high-strength concrete and normal strength concrete after exposure to high temperatures10.1016/S0958-9465(98)00034-1 ↗
21. The effect of high temperatures on the mechanical properties of concrete made with different types of aggregates10.1016/j.firesaf.2011.07.002 ↗
22. Influence of recycled glass content and curing conditions on the properties of self-compacting concrete after exposure to elevated temperatures10.1016/j.cemconcomp.2011.08.010 ↗
23. The resistance to fire of concrete and reinforced concrete
24. The hydration of cement paste using the semi-isothermal method of derivative thermogravimetry10.1016/0008-8846(80)90111-8 ↗
25. Stress–strain behaviour of fire exposed self-compacting glass concrete10.1002/fam.2131 ↗
26. Influence of the nature of aggregates on the behaviour of concrete subjected to elevated temperature10.1016/j.cemconres.2011.01.005 ↗