journal article·2015-08

Development of inorganic polymer by alkali-activation of untreated kaolinitic clay: Reaction stoichiometry, strength and dimensional stability

Muayad Esaifan, Hubert Rahier, Ahmed Barhoum, Hani Khoury, Mohammed Hourani, Jan Wastiels

Publisher page

Abstract

Abstract An environmental friendly building material was developed by alkali-activation of untreated kaolinitic clay using sodium hydroxide. The reaction was studied using differential scanning calorimetry. The chemical structure of the produced inorganic polymer was deduced from infrared spectroscopy, X-ray powder diffraction, thermogravimetric analysis, and scanning electron microscopy to be the tetrahydrate phase of hydroxysodalite with a Na/Al ratio of 4/3. Its strength and stability were evaluated in terms of compressive strength under dry and saturated conditions using different ratios of mixing water and NaOH. The compressive strength of dry samples ranges between 45 and 50 MPa. The wet samples after soaking in water show a strength between 20 and 25 MPa, and the wet samples after alternating cycles of drying and wetting also show a strength of 20–25 MPa.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Clay minerals and soil interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Low-temperature synthesized aluminosilicate glasses. Part I. Low-temperature reaction stoichiometry and structure of a model compound10.1007/BF00355128 ↗
2. Thermal behavior of inorganic geopolymers and composites derived from sodium polysialate10.1016/S0025-5408(02)01022-X ↗
3. Chemical stability of cementitious materials based on metakaolin10.1016/S0008-8846(99)00074-5 ↗
4. Durability of alkali-activated materials: progress and perspectives10.1111/jace.12831 ↗
5. Characterization of alkali activated kaolinitic clay10.1016/j.clay.2013.02.005 ↗
6. How does Na, K alkali metal concentration change the early age structural characteristic of kaolin-based geopolymers10.1016/j.ceramint.2014.02.052 ↗
7. Alshaaer, M, Cuypers, H, Wastiels, J. Stabilization of kaolinitic soil from Jordan for construction purposes by using mineral polymerization technique, in Proceedings of the 6th International Conference on Concrete Technology for Development Countries, Amman, 2002, pp. 1085–1092.
8. An environmental evaluation of geopolymer based concrete production: reviewing current research trends10.1016/j.jclepro.2011.03.012 ↗
9. Costs and carbon emissions for geopolymer pastes in comparison to ordinary Portland cement10.1016/j.jclepro.2011.02.010 ↗
10. Carbon footprint of geopolymeric mortar: study of the contribution of the alkaline activating solution and assessment of an alternative route
11. Slags with a high Al and Fe content as precursors for inorganic polymers10.1016/j.clay.2012.09.020 ↗
12. Rheology of geopolymer by DOE approach10.1016/j.conbuildmat.2012.04.122 ↗
13. Alkaline activation of metakaolin and calcium hydroxide mixtures: influence of temperature, activator concentration and solids ratio10.1016/S0167-577X(00)00212-3 ↗
14. Mineral polymer based on fly ash
15. Hardening mechanisms of an alkaline-activated class F fly ash10.1016/S0008-8846(01)00571-3 ↗
16. Hydration of alkali-activated ground granulated blast furnace slag10.1023/A:1004742027117 ↗
17. Effects of dosage and modulus of water glass on early hydration of alkali-slag cements10.1016/S0008-8846(01)00717-7 ↗
18. Synthesis of inorganic polymers using fly ash and primary lead slag10.1016/j.jhazmat.2011.12.039 ↗
19. Yasin · 2006
20. ASTM D422–63 · 2007
21. ASTM D4318–10 · 2003
22. Van Olphen · 1979
23. ASTM D4318–10 · 2003
24. The function of fillers in concrete10.1007/BF02486602 ↗
25. Alkaline activation of metakaolin an isothermal conduction calorimetry study10.1023/A:1010176321136 ↗
26. Low-temperature synthesized aluminosilicate glasses: Part III Influence of the composition of the silicate solution on production, structure and properties10.1023/A:1018563914630 ↗
27. Detection of geopolymer structure by spectroscopic and molybdate measurements10.1002/zaac.201300087 ↗
28. Infra-red spectra of inorganic aluminates and characteristic vibrational frequencies of AlO4 tetrahedra and AlO6 octahedra
29. Intercalation study of clay minerals by Fourier transform infrared spectrometry10.1016/0924-2031(93)87055-X ↗
30. Molecular sieve zeolites
31. The effect of alkali concentration and solid/liquid ratio on the hydrothermal synthesis of zeolite NaA from natural kaolinite10.1016/j.micromeso.2005.07.008 ↗
32. Kinetics of formation of zeolite Na-A [LTA] from natural kaolinites10.1007/s002690050032 ↗
33. Beiträge zur Reaktionsfähigkeit der Silikate bei niedrigen Temperaturen10.1007/BF01112365 ↗
34. Efflorescence control in geopolymer binder based on natural pozzolan10.1016/j.cemconcomp.2011.07.007 ↗
35. ASTM C150/C150M-12 · 2003