journal article·2016-06

Improvement of durability of cement pipe with high calcium fly ash geopolymer covering

Prinya Chindaprasirt, Ubolluk Rattanasak

Publisher page

Abstract

Abstract Cement pipes have been used to transfer the domestic sewage and industrial wastewater due to its cost effectiveness. However, they faced the acid attack problem owing mainly to the high content of calcium compounds in the composite. Coating of cement pipes is one of the methods to protect the cement pipe surface from acid attack. An alumino-silicate geopolymer provides excellent mechanical properties and resistance to severe environments. Therefore, this research proposed the covering of cement-based materials with geopolymer. The covered specimens were immersed in deionized water (pH = 6.1), 0.005% H2SO4 (pH = 3), 5% MgSO4 (pH = 7.7) and 3% H2SO4 (pH = 0.3, representing the worst condition in the wastewater system). The pH and Ca2+ content of immersion solutions were measured. In addition, mechanical and chemical properties of geopolymeric-covering material were tested after the immersion in solutions for 30 and 90 days.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Evaluating a polymer concrete coating for protecting non-metallic underground facilities from sulfuric acid attack10.1016/S0886-7798(01)00053-0 ↗
2. Lindeburg · 2012
3. Potential application of geopolymers as protection coatings for marine concrete I. Basic properties10.1016/j.clay.2010.06.019 ↗
4. Fly ash based geopolymer thin coatings on metal substrates and its thermal evaluation10.1016/j.jhazmat.2010.04.121 ↗
5. Preparation and thermal properties of fire resistant metakaolin-based geopolymer-type coatings10.1016/j.jnoncrysol.2010.09.063 ↗
6. Resistance to acid and sulfate solutions of microwave-assisted high calcium fly ash geopolymer10.1617/s11527-012-9907-1 ↗
7. ASTM C 321 – 00: standard test method for bond strength of chemical-resistant mortars
8. High-strength geopolymer using fine high-calcium fly ash10.1061/(ASCE)MT.1943-5533.0000161 ↗
9. NaOH-activated ground fly ash geopolymer cured at ambient temperature10.1016/j.fuel.2011.01.018 ↗
10. Acidic corrosion of hydrated cement based materials: Part 1. – mechanism of the phenomenon
11. Skalny · 2002
12. Characterizations of FBC/PCC fly ash geopolymeric composites10.1016/j.conbuildmat.2014.05.067 ↗
13. Wilson · 1993
14. Sulfate resistance of blended cements containing fly ash and rice husk ash10.1016/j.conbuildmat.2005.10.005 ↗
15. ASTM C 2240 – 03 : standard test method for rubber property - durometer hardness
16. Amrhein · 1998
17. Wamer · 2004
18. Compressive strength, modulus of elasticity, and water permeability of inorganic polymer concrete10.1016/j.matdes.2010.05.012 ↗
19. Influence of NaOH solution on the synthesis of fly ash geopolymer10.1016/j.mineng.2009.03.022 ↗
20. Structural reorganization of class F fly ash in alkaline silicate solutions10.1016/S0927-7757(02)00237-6 ↗
21. Infrared absorption band shape studies: fundamental OH stretching vibration of benzyl alcohol conformers in dilute carbon tetrachloride solution10.1139/v73-486 ↗
22. FT-Raman and FT-IR spectroscopic study of the local structure of synthetic Mg/Zn/Al-hydrotalcites10.1002/jrs.1244 ↗
23. Characterization of minerals and biogeochemicalmarkers on Mars: a Raman and IR spectroscopic study of montmorillonite10.1002/jrs.1173 ↗
24. Li · 2009