Loose sand particles cemented by different bio-phosphate and carbonate composite cement
Source abstract
Abstract
Abstract Loose sand particles could be cemented by the microbial induced phosphate and carbonate precipitation into a bio-sandstone with a certain mechanical strength when the Sporosarcina pasteurii contained K 2 HPO 4 ·3H 2 O and the mixture solution of urea and MgCl 2 in the 1:1 of volume ratio were injected by a peristaltic pump into quartz sand mold. The result shows that loose quartz sand particles are well cemented into a bio-sandstone, and the compressive strength of bio-sandstones is greater than 1.0 MPa. Ammonia/ammonium was produced during the hydrolysis of the urea and could be effectively become into environment-friendly struvite in the cementation process. In addition, the ingredients of the bio-sandstones were mainly quartz sand, struvite and hydromagnesite through XRD analysis. The internal microstructure of bio-sandstone was observed by SEM and the bio-phosphate and carbonate composite cement between sand particles indicated the shape was mainly irregular particles. The solidified layer of the surface of dust and sand particles was formed after spray bio-phosphate and carbonate composite cement, and wind erosion rate of dust and sand is 0 g/m 2 /h and 0 g/m 2 /h, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microbial Applications in Construction Materials · Grouting, Rheology, and Soil Mechanics · Marine Sponges and Natural Products
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Bio-geochemical reactive transport modeling of microbial induced calcite precipitation to predict the treatment of sand in one-dimensional flow10.1016/j.compgeo.2014.01.013 ↗
2. Microbial carbonate precipitation as a soil improvement technique10.1080/01490450701436505 ↗
3. Optimization of calcium-based bioclogging and biocementation of sand10.1007/s11440-013-0278-8 ↗
4. In situ soil cementation with ureolytic bacteria by surface percolation10.1016/j.ecoleng.2012.01.013 ↗
5. Influence of molding process on mechanical properties of sandstone cemented by microbe cement10.1016/j.conbuildmat.2011.08.039 ↗
6. Precipitation of calcite by indigenous microorganisms to strengthen liquefiable soils10.1080/01490451.2010.499929 ↗
7. A new proposal for urease mechanism based on the crystal structures of the native and inhibited enzyme from Bacillus pasteurii: why urea hydrolysis costs two nickels10.1016/S0969-2126(99)80026-4 ↗
8. Key roles of pH and calcium metabolism in microbial carbonate precipitation10.1023/A:1015135629155 ↗
9. Molecular details of urease inhibition by boric acid: insights into the catalytic mechanism10.1021/ja049618p ↗
10. Feasibility of using microalgae for biocement production through biocementation10.4172/2155-9821.1000111 ↗
11. Bio-mediated ground improvement: from laboratory experiment to pilot applications. ASCE GeoFrontiers 2011: advances in geotechnical engineering
12. Bio-mediated soil improvement10.1016/j.ecoleng.2008.12.029 ↗
13. Potential soil reinforcement by biological denitrification10.1016/j.ecoleng.2009.03.026 ↗
14. Fixation and distribution of bacterial activity in sand to induce carbonate precipitation for ground reinforcement10.1016/j.ecoleng.2009.01.004 ↗
15. Effect of coarse particle volume fraction on the hydraulic conductivity of fresh cement based material10.1617/s11527-014-0311-x ↗
16. The influence of standing time and content of the slurry on bio-sandstone cemented by biological phosphates10.1016/j.conbuildmat.2015.02.038 ↗