journal article·2016-10

Aging effects on recycled WMA porous asphalt mixtures

F. Frigio, S. Raschia, D. Steiner, B. Hofko, F. Canestrari

Publisher page

Abstract

Abstract Nowadays, the use of reclaimed asphalt pavements (RAP) is often combined with Warm Mix Asphalt (WMA) technologies with several benefits in terms of environment, cost and mechanical performance. Concerns still exist related to in-service and aging characteristics of warm recycled mixtures since WMA technologies have been developed over the last decade and hence long term performance data are not available yet. The objective of this experimental study is to evaluate the aging effect on recycled porous asphalt (PA) mixtures produced at reduced temperatures using different WMA additives (organic, chemical and zeolite) and including 15% of RAP. In this sense, long term aging was simulated in the laboratory on compacted specimens by means of the Viennese Aging Procedure (VAPro). Rheological properties of the extracted bitumen samples were measured in order to evaluate possible links between bitumen and mixtures performance. As far as mixtures are concerned, stiffness tests were carried out before and after aging, whereas fatigue resistance was evaluated on long term aged mixtures to compare long term performance of HMA and WMA porous asphalt. Mixtures as well as bitumens results showed that the lower aging process that WMA mixtures undergo during production affects mixtures stiffness at the beginning of service life. Only the presence of the organic additive increases the stiffness of WMA bitumens and mixtures due to the crystalline network structure that forms in the bitumen. On the other hand, extensive long term aging effects were measured in case of WMA mixtures. Nonetheless, overall fatigue results showed that long term fatigue performance of WMA mixtures are not significantly affected compared to HMA regardless of WMA additive types.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · High voltage insulation and dielectric phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Durability of hot and warm asphalt mixtures containing high rates of reclaimed asphalt at laboratory scale10.1617/s11527-014-0454-9 ↗
2. Laboratory performance of warm mix asphalt containing recycled asphalt mixtures10.1016/j.conbuildmat.2014.04.002 ↗
3. Laboratory Evaluation of Warm Mix Asphalt and Asphalt Mixtures with Recycled Materials10.1061/41167(398)72 ↗
4. The role of a surfactant based additive on the production of recycled warm mix asphalts – Less is more10.1016/j.conbuildmat.2012.04.141 ↗
5. Mechanical properties of porous asphalt pavement materials with warm mix asphalt and RAP10.1061/(ASCE)TE.1943-5436.0000307 ↗
6. Laboratory evaluation of warm-mix open graded friction course mixtures10.1061/(ASCE)MT.1943-5533.0000611 ↗
7. Resistance to disintegration of warm porous asphalt incorporating Sasobit®
8. Characterisation of warm recycled porous asphalt mixtures
9. Laboratory investigation of compaction characteristics and performance of warm mix asphalt containing chemical additives10.1016/j.conbuildmat.2012.07.074 ↗
10. Influence of aging on the rheological behaviour of warm mix asphalt binders
11. Rheology evaluations of WMA binders using ultraviolet and PAV aging procedures10.1016/j.conbuildmat.2015.01.046 ↗
12. Rheological evaluation of short- and long-term performance for warm mix asphalt (WMA) binders
13. Effects of aging on the mechanical characteristics of bituminous binder in PAC10.1061/(ASCE)MT.1943-5533.0000021 ↗
14. Towards an optimised lab procedure for long-term oxidative ageing of asphalt mix specimen
15. Using highly oxidant gas for simulating long-term aging of asphalt mix specimens in the lab
16. Improved durability of recycled porous asphalt10.1016/j.conbuildmat.2013.07.044 ↗
17. Use of reclaimed asphalt in porous asphalt mixtures: laboratory and field evaluations10.1061/(ASCE)MT.1943-5533.0001182 ↗
18. Comparative analysis of emissions from the manufacture and use of hot and half-warm mix asphalt10.1016/j.jclepro.2012.09.036 ↗
19. In plant production of hot recycled mixtures with high reclaimed asphalt pavement content: a performance evaluation
20. CEN · 2013
21. Dielectric-barrier discharges: their history, discharge physics, and industrial applications10.1023/A:1022470901385 ↗
22. Stanley · 1999
23. CEN · 2004
24. Stiffness testing for bituminous mixtures10.1007/BF02481553 ↗
25. D. Steiner, B. Hofko, R. Blab, Effect of Air Void Content and Repeated Testing on Stiffness of Asphalt Mix Specimen. Civil Engineering Conference in the Asian Region Cecar 7, Waikiki, USA, 2016.
26. CEN · 2008
27. Bahia · 2001
28. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids10.1021/ja01619a008 ↗
29. Brown · 2009
30. Warm mix asphalt: an overview10.1016/j.jclepro.2011.11.053 ↗
31. Laboratory evaluation of the mechanical properties of plant-produced warm-mix asphalt mixtures10.1080/14680629.2012.735799 ↗
32. R.I. Kingham, Failure criteria developed from AASHO road test data. Structural Design of Asphalt Concrete Pavements to Prevent Fatigue Cracking, Highway Research Board Special Report, 183–196.
33. Mallick · 2013