journal article·2016-10

Prediction on dynamic modulus of asphalt concrete with random aggregate modeling methods and virtual physics engine

Peng Cao, Feng Jin, Decheng Feng, Changjun Zhou, Weichao Hu

Publisher page

Abstract

Abstract Asphalt mixture usually needs compaction prior to servicing in field. Traditionally, finite element methods cannot simulate the compaction of asphalt mixture in field. Although discrete element methods (DEM) are able to describe such a process, the intrusion among aggregates always exists and influences the calculation accuracy. Additionally, the central difference method used in DEM requires very fine elements, which significantly jeopardizes the calculation efficiency. This study proposed an innovative systematic method to generate virtual asphalt mixture based on random aggregate modeling method and virtual physics engine theory. The aggregates were virtually generated with random aggregate modeling methods and imported into the virtual physics engine, where the movements of aggregates in asphalt concrete during compaction was simulated. The coordinates of aggregates after compaction were extracted, which were incorporated into the Convex Hull Algorithm to determine the new locations of aggregates after compaction. The original contribution of this study is that a pre-processing method of generating virtual asphalt concrete was proposed, which can successfully introduce compaction of asphalt mixture into finite element models and solve the intrusion problem of aggregates. The dynamic modulus of asphalt concrete simulated in finite element method (FEM) based on this modeling method was found much closer to the experimental results, comparing to the traditional analytic methods. It indicates the proposed method valid in generating virtual asphalt concrete in FEM.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Grouting, Rheology, and Soil Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Expert system to control construction problems in flexible pavements10.1111/mice.12001 ↗
2. Analytical modeling and experimental study of tensile strength of asphalt concrete composite at low temperatures
3. National Research Council, Simple performance test for Superpave mix design, National Cooperative Highway Research Program. NCHRP 9-19, Interim Report, 2003.
4. Mechanical behavior of fiber-reinforced cement-based composites10.1111/j.1151-2916.1991.tb06836.x ↗
5. Evaluation of empirical and theoretical models to determine asphalt mixtures stiffnesses at low temperature
6. Development of an elastoviscoplastic microstructural-based continuum model to predict permanent deformation in hot mix asphalt10.1061/(ASCE)1532-3641(2007)7:2(119) ↗
7. Microstructural viscoplastic continuum model for asphalt pavements
8. Modeling of tension stiffening behavior in FRP-strengthened RC members based on rigid body spring networks10.1111/j.1467-8667.2011.00741.x ↗
9. Elastic modulus prediction of asphalt concrete10.1061/(ASCE)0899-1561(1999)11:3(236) ↗
10. Experimental study of cement-asphalt emulsion composite10.1016/S0008-8846(98)00038-6 ↗
11. Analytical modeling of three-layered HMA mixtures10.1061/(ASCE)1532-3641(2007)7:2(140) ↗
12. Micromechanics-based dynamic modulus prediction of polymeric asphalt concrete mixtures10.1016/j.compositesb.2007.05.003 ↗
13. Numerical prediction of elastic modulus of asphalt concrete with imperfect bonding10.1016/j.conbuildmat.2011.12.059 ↗
14. Influence of interfacial zone between asphalt mastic and aggregate on the elastic behavior of asphalt concrete10.1016/j.conbuildmat.2013.08.072 ↗
15. Modulus prediction of asphalt concrete with imperfect bonding between aggregate-asphalt mastic10.1016/j.compositesb.2011.05.023 ↗
16. Micromechanical creep models for asphalt-based multi-phase particle-reinforced composites with viscoelastic imperfect interface10.1016/j.ijengsci.2013.11.011 ↗
17. Investigation into stress states in porous asphalt concrete on the basis of FE-modelling10.1016/j.finel.2006.11.004 ↗
18. 2D and 3D meso-scale finite element models for ravelling analysis of porous asphalt concrete10.1016/j.finel.2007.11.012 ↗
19. Damage accumulation model for monotonic and dynamic shear fracture of asphalt-stone adhesion10.1016/j.tafmec.2006.07.005 ↗
20. Mesoscopic study of concrete II: nonlinear finite element analysis standard test method for linear-elastic plane-strain fracture10.1016/S0045-7949(98)00178-3 ↗
21. Mesoscopic study of concrete I: generation of random aggregate structure and finite element mesh10.1016/S0045-7949(98)00177-1 ↗
22. Numerical analysis of gas permeability of concrete incorporating recycled aggregate
23. The construction of three-dimensional finite element mesh for microstructure of multiphase composites
24. Layering disposition and FE coordinate generation for random aggregate arrangements
25. Peak ground acceleration estimation by linear and nonlinear models with reduced order Monte Carlo simulation
26. Advanced Markov chain Monte Carlo approach for fine element calibration under uncertainty10.1111/j.1467-8667.2012.00802.x ↗
27. Reliability assessment with fuzzy random variables using interval Carlo simulation10.1111/mice.12028 ↗
28. Fuzzy Monte Carlo simulation and risk assessment in construction10.1111/j.1467-8667.2009.00632.x ↗
29. A Bayesian probabilistic approach for crack characterization in plate structures10.1111/j.1467-8667.2009.00647.x ↗
30. Ontologies to support RFID-based link between virtual models and construction components10.1111/j.1467-8667.2009.00638.x ↗
31. Interactive graphical representation for collaborative 3D virtual worlds10.1111/j.1467-8667.2009.00613.x ↗
32. Discrete element modeling to predict the modulus of asphalt concrete mixture10.1061/(ASCE)0899-1561(2004)16:2(140) ↗
33. Discrete element analysis of the influences of aggregate properties and internal structure on fracture in asphalt mixtures10.1061/(ASCE)MT.1943-5533.0000005 ↗
34. The Quickhull algorithm for convex hulls10.1145/235815.235821 ↗
35. Fatigue resistance potential for hot mix asphalt using viscoelastic continuum damage analysis10.1111/j.1460-2695.2011.01607.x ↗
36. Shu · 2008
37. Kim · 2008
38. Steady-state dynamic method: an efficient and effective way to predict dynamic modulus of asphalt concrete10.1016/j.conbuildmat.2016.02.071 ↗