Advanced mechanical properties and frost damage resistance of ultra-high performance fibre reinforced concrete
Source abstract
Abstract
Abstract Ultra-high performance concrete (UHPC) mixture with advanced mechanical and durability properties was created using decent mixer. Usually UHPC is made with advanced and sophisticated technology. In experiment UHPC was prepared with high intensity mixer “EIRICH R02”, then mixture was modified and prepared in rotating pan mixer “Zyklos ZZ50HE”. Rotating pan mixer is similar to mixer which has common concrete plants. Experiment results revealed that UHPC with W/C = 0.30 and advanced mechanical and durability properties can be prepared. In experiment tremendous amount of micro steel fibres (up to 147 kg/m3) were incorporated in UHPC. Concrete with excellent salt scaling resistance and great mechanical properties was obtained. Compressive strength was increased about 30% from 116 MPa to 150 MPa and flexural strength was increased about 5 times from 6.7 to 36.2 MPa. Salt-scaling resistance at 40 cycles in 3% NaCl solution varied from 0.006 kg/m2 to 0.197 kg/m2. There were a few attempts to create UHPC and UHPFRC with decent technology, however, unsuccessfully till now. In the world practice this new material is currently used in the construction of bridges and viaducts.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Probabilistic models applied to safety assessment of reinforced concrete structures subjected to chloride ingress10.1016/j.engfailanal.2013.01.023 ↗
2. EN 206:2013 Concrete. Specification, performance, production and conformity.
3. Evaluation of ultra-high-performance-fiber reinforced concrete binder content using the response surface method10.1016/j.matdes.2013.06.034 ↗
4. Mix design and properties assessment of ultra-high performance fibre reinforced concrete (UHPFRC)10.1016/j.cemconres.2013.11.002 ↗
5. Mechanical and durability properties of self consolidating high performance concrete incorporating natural zeolite, silica fume and fly ash10.1016/j.conbuildmat.2013.02.069 ↗
6. The role of SiO2 nanoparticles and ground granulated blast furnace slag admixtures on physical, thermal and mechanical properties of self compacting concrete10.1016/j.msea.2010.11.064 ↗
7. Effect of shrinkage reducing admixture on tensile and flexural behaviors of UHPFRC considering fiber distribution characteristics10.1016/j.cemconres.2013.09.006 ↗
8. Preparation of ultra-high performance concrete with common technology and materials10.1016/j.cemconcomp.2011.11.005 ↗
9. Temperature dependence of autogenous shrinkage of silica fume cement pastes with a very low water–binder ratio10.1016/j.cemconres.2013.03.017 ↗
10. Effect of internal curing on durability-related properties of high performance concrete10.1016/j.cemconres.2011.07.012 ↗
11. Effect of fiber content on mechanical and fracture properties of ultra high performance fiber reinforced cementitious composites10.1016/j.compstruct.2013.07.033 ↗
12. Effects of shrinkage reducing admixture and wollastonite microfiber on early-age behavior of ultra-high performance concrete10.1016/j.cemconcomp.2013.11.008 ↗
13. Influence of amorphous silica on the hydration in ultra-high performance concrete10.1016/j.cemconres.2014.01.006 ↗
14. Material and bond properties of ultra high performance fiber reinforced concrete with micro steel fibers10.1016/j.compositesb.2013.10.081 ↗
15. Mix design of UHPFRC and its response to projectile impact10.1016/j.ijimpeng.2013.08.003 ↗
16. The effect of autoclave pressure, temperature and duration time on mechanical properties of reactive powder concrete10.1016/j.conbuildmat.2013.01.003 ↗
17. Blast-resistant characteristics of ultra-high strength concrete and reactive powder concrete10.1016/j.conbuildmat.2011.09.014 ↗
18. Durability and mechanical properties of high strength concrete incorporating ultra fine ground granulated blast-furnace slag10.1016/j.conbuildmat.2012.11.052 ↗
19. Durability of an ultra high performance fiber reinforced concrete (UHPFRC) under progressive aging10.1016/j.cemconres.2013.09.008 ↗
20. Utilization of ultra-high performance fibre concrete (UHPFC) for rehabilitation a review10.1016/j.proeng.2013.03.048 ↗
21. Life cycle assessment of UHPC bridge constructions: Sherbrooke footbridge, Kassel Gartnerplatz footbridge and Wapello Road Bridge
22. State of art of design and construction of UHPFRC structures in France
23. Nanotechnological improvement of structural materials – impact on material performance and structural design10.1016/j.cemconcomp.2012.11.003 ↗
24. EN 196-6:2010. Methods of testing cement – Part 6: determination of fineness.
25. EN 12390-4:2000. Testing hardened concrete – Part 4: compressive strength – specification for testing machines.
26. EN 12390-5:2000. Testing hardened concrete – Part 5: flexural strength of test specimens.
27. CEN/TS 12390-9:2006. Testing hardened concrete – Part 9: freeze-thaw resistance – scaling.
28. Size and geometry dependent tensile behavior of ultra-high-performance fiber-reinforced concrete10.1016/j.compositesb.2013.10.072 ↗
29. Water-binder ratio influence on de-icing salt scaling of fly ash concretes10.1016/j.proeng.2013.04.104 ↗
30. Influence of air entraining agents on deicing salt scaling resistance and transport properties of high-volume fly ash concrete10.1016/j.cemconcomp.2013.01.005 ↗
31. Effect of casting method and shear span-to-depth ratio on the behaviour of ultra-high performance concrete cross arms for high voltage transmission lines10.1016/j.engstruct.2010.03.023 ↗
32. Nondestructive testing of ultra-high performance concrete to evaluate freeze-thaw resistance10.5755/j01.mech.18.2.1565 ↗
33. Vitoldas Vaitkevičius, Evaldas Šerelis, Harald Hilbigb, The effect of glass powder on the microstructure of ultra high performance concrete, Constr. Build. Mater. 68 (2014) 102–109, http://dx.doi.org/10.1016/j.conbuildmat.2014.05.101.10.1016/j.conbuildmat.2014.05.101 ↗