journal article·2016-11

Hygrothermal aging effects on flexural behavior of pultruded glass fiber reinforced polymer laminates in bridge applications

Haohui Xin, Yuqing Liu, Ayman Mosallam, Youyou Zhang, Congzhe Wang

Publisher page

Abstract

Abstract It is significant for designers to consider not only short-term characteristics but also the long-term properties of composite materials that are commonly used in highway bridge applications. In this study, flexural tests were performed on composite specimens that were exposed to both fresh water and artificial seawater environments at 40 °C, 60 °C and 80 °C temperatures. The purpose of conducting these tests is to (1) investigate the hygrothermal aging effects on flexural properties of pultruded fiber reinforced polymer (PFRP) composites, and (2) to establish relationship between flexural strength and flexural modulus and hygrothermal aging time. Based on the results of this study, it was found that: (i) the degradation in both average flexural strength and modulus increases at higher temperatures; (ii) the degradation in transverse flexural strength and modulus is relatively higher as compared to those observed for longitudinal flexural strength and modulus; and (iii) the reduction in average flexural strength and modulus for specimens exposed to fresh water and artificial seawater environments is relatively small. The long-term hygrothermal aging effects on flexural properties of PFRP laminates, including temperature variation during exposure, were predicted using both Phillips equation and Arrhenius relationship. The predicted flexural strength, flexural modulus and coefficient “ A ” agreed well with experimental results. The hygrothermal aging effects on flexural properties, at room temperature (23 °C) after 100.0 years, were predicted and compared with design values prescribed by ACI-440, TR-55 and GB50608 design guidelines provisions. Results of this study confirmed the reliability of design values recommended by ACI-440 design guidelines that were found to be similar to experimental results, while design values produced by following procedures recommended by both TR-55 and GB 50608 documents are about 1.75–2.25 times larger than the predicted values.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Structural Load-Bearing Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Fiber-reinforced polymer composites for construction-state-of-the-art review10.1061/(ASCE)1090-0268(2002)6:2(73) ↗
2. Bank · 2006
3. Polymer composites in construction: an overview
4. Experimental investigation of movable hybrid GFRP and concrete bridge deck10.1016/j.conbuildmat.2011.05.002 ↗
5. Fatigue behavior of hybrid GFRP-concrete bridge decks under sagging moment10.12989/scs.2015.18.4.925 ↗
6. Thermal analysis on composite girder with hybrid GFRP-concrete deck10.12989/scs.2015.19.5.1221 ↗
7. Plate bending behavior of a pultruded GFRP bridge deck system10.1016/j.compstruct.2003.08.011 ↗
8. Modeling and characterization of fiber-reinforced plastic honeycomb sandwich panels for highway bridge applications10.1016/S0263-8223(01)00034-4 ↗
9. Durability of pultruded fiber reinforced polymer (PFRP) composites in mining environments
10. Moisture diffusion and hygrothermal aging of pultruded glass fiber reinforced polymer laminates in bridge application10.1016/j.compositesb.2016.04.085 ↗
11. Effects of environmental aging on the properties of pultruded GFRP10.1016/S1359-8368(99)00013-X ↗
12. Long-term environmental fatigue of pultruded glass-fiber-reinforced composites under flexural loading10.1016/S0142-1123(98)00088-7 ↗
13. Durability of pultruded glass-fiber-reinforced polyester profiles for structural applications10.1007/s11029-006-0042-3 ↗
14. Durability of FRP rods for concrete structures10.1016/j.conbuildmat.2004.04.012 ↗
15. Moisture diffusion and hygrothermal aging in pultruded fibre reinforced polymer composites of bridge decks10.1016/j.matdes.2012.01.017 ↗
16. Durability characterization of wet layup graphite/epoxy composites used in external strengthening
17. Design factors, reliability, and durability prediction of wet layup carbon/epoxy used in external strengthening10.1016/j.compositesb.2006.06.001 ↗
18. Effect of temperature and cyclic hygrothermal aging on the interlaminar shear strength of carbon fiber/bismaleimide (BMI) composite10.1016/j.matdes.2011.04.007 ↗
19. S. AL-Assafi, A. Mosallam, Impact of aqueous environments on performance of pultruded composites, in: Proceedings of HBRC International Conference on Future Vision and Challenges for Urban Development, December 20–24, 2004, pp. 20–22.
20. P.K. Dutta, A. Mosallam, R. Lampo, Response of FRP composite joints in hygrothermal environments, in: Proceedings of ICPCM on A New Era of Building, February 18–20, 2003.
21. Mosallam · 2011
22. Accelerated test methods to determine the long-term behavior of FRP composite structures: environmental effects10.1177/073168449501400602 ↗
23. Accelerated environmental ageing study of polyester/glass fiber reinforced composites (GFRPCs)10.1016/j.compositesb.2006.10.004 ↗
24. Standardization Administration of the People’s Republic of China (SAPRC) · 2005
25. Standardization Administration of the People’s Republic of China (SAPRC) · 2005
26. Standardization Administration of the People’s Republic of China (SAPRC) · 2005
27. Standardization Administration of the People’s Republic of China (SAPRC) · 2005
28. Iso · 1998
29. Strength ratios of composite materials in flexure and in tension10.1177/002199837400800209 ↗
30. Application of coefficient of variation in reliability-based mechanical design and manufacture
31. Prediction of long-term stress-rupture life for glass fibre-reinforced polyester composites in air and in aqueous environments10.1016/0010-4361(83)90015-0 ↗
32. Temperature dependence of hydrothermal ageing of CSM-laminate during water immersion10.1016/0266-3538(87)90050-9 ↗
33. Arrhenius · 1887
34. American Concrete Institute · 2002
35. TR-55 · 2000
36. GB/T 50608-2010 · 2010