journal article·2016-12

Portland-composite and composite cement concretes made with coarse recycled and recycled glass sand aggregates: Engineering and durability properties

Sevket Can Bostanci, Mukesh Limbachiya, Hsein Kew

Publisher page

Abstract

Abstract Sustainable development approach demands the use of environmentally friendly materials. One possible way to encourage sustainable approach is via use of Portland cement (PC) replacement through use of permitted cement constituents in conformity with BS EN 197-1, to lower carbon footprint, and use of recycled aggregates as permitted within BS 8500, to encourage sustainability. Thus, this research study aimed to produce low carbon and sustainable concrete. For this aim, engineering and durability properties of equal 28-day design strength (40 and 50 N/mm2) concretes made with Portland-composite and composite cements, CEM II/B-M and CEM V/A respectively, and partially substituted coarse recycled (RA) and washed recycled glass sand (RGS), 25% and 15% respectively, aggregates was investigated. The loss of workability was found to be larger for particularly CEM V/A and recycled aggregate concrete (RAC) mixes. Studies of hardened concrete properties, comprising bulk engineering properties (compressive cube and cylinder strength, flexural strength, drying shrinkage) and durability (initial surface absorption) showed enhanced performance for CEM II/B-M and CEM V/A mixes of equivalent strength natural aggregate concrete mixes (NAC), except resistance to carbonation. However, the use of CEM II/B-M and CEM V cements in RAC mixes slightly reduced the engineering and durability properties compared to corresponding NAC mixes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. UK Greenhouse Gas Statistics & Inventory Team, Science and Innovation Group, Department of Energy and Climate Change, UK Greenhouse Gas Emissions: Performance Against Emissions Reduction Targets – 2012 Provisional Figures, 2012.
2. British Standard Institution. BS EN 197-1 Cement · 2011
3. Greenspec, Greenspec – Green Building Design, Products and Materials in the UK [online], UK: Wakefield [cited 2nd July 2016], , 2016.
4. Concrete construction · 2012
5. British Standard Institution. BS EN 12620 · 2013
6. British Standard Institution. BS 8500-1:2006+A1:2012 · 2006
7. British Standard Institution. BS 8500-2:2006+A1:2012 · 2006
8. Mineral Products Association · 2013
9. Sustainable Concrete Forum (no date) Home Page, [online], MPA The Concrete Centre, UK, [cited 3rd July 2016], .
10. Mineral Products Association (no date) Mineral Products Association (MPA) – the trade association for the aggregates, asphalt, cement, concrete, lime, mortar and silica sand industries, [online], Mineral Products Association, London, [cited 4th July 2014], .
11. University of Dundee, www.greenconcrete.dundee.ac.uk, [online] University of Dundee, Scotland, [cited 4th July 2016], , 2005.
12. A study on creep and drying shrinkage of high performance concrete10.1016/S0008-8846(01)00539-7 ↗
13. Mechanical and durability properties of self consolidating high performance concrete incorporating natural zeolite, silica fume and fly ash10.1016/j.conbuildmat.2013.02.069 ↗
14. Use of recycled concrete aggregate in fly-ash concrete10.1016/j.conbuildmat.2011.07.023 ↗
15. Properties of self-compacting concretes made with binary, ternary, and quaternary cementitious blends of fly ash, blast furnace slag, and silica fume10.1016/j.conbuildmat.2008.09.015 ↗
16. Use of binary and ternary blends in high strength concrete10.1016/j.conbuildmat.2007.03.026 ↗
17. Properties of HPC with recycled aggregates10.1016/j.cemconres.2005.11.022 ↗
18. Bulk engineering and durability properties of washed glass sand concrete10.1016/j.conbuildmat.2008.05.022 ↗
19. Utilizing waste recycled glass as sand/cement replacement in concrete10.1061/(ASCE)0899-1561(2009)21:12(709) ↗
20. Influence of supplementary cementitious on engineering properties of high strength concrete10.1016/j.conbuildmat.2010.12.013 ↗
21. Properties of self-compacting concrete prepared with recycled glass aggregate10.1016/j.cemconcomp.2008.12.002 ↗
22. Mechanical properties of self consolidating concrete blended with high volumes of fly ash and slag10.1016/j.conbuildmat.2012.02.034 ↗
23. Effect of binder content on the performance of alkali-activated slag concretes10.1016/j.cemconres.2010.08.017 ↗
24. The influence of mineral admixtures on the short and long-term performance of concrete10.1016/j.buildenv.2006.10.019 ↗
25. Rheological properties of cementitious materials containing mineral admixtures10.1016/j.cemconres.2004.11.002 ↗
26. Compressive strength and resistance to chloride ion penetration and carbonation of recycled aggregate concrete with varying amount of fly ash and fine recycled aggregate10.1016/j.wasman.2011.06.014 ↗
27. Studies on the corrosion resistance of reinforced steel in concrete with ground granulated blast-furnace slag – an overview10.1016/j.jhazmat.2006.07.022 ↗
28. Durability of recycled aggregate concrete designed with equivalent mortar volume method10.1016/j.cemconcomp.2009.02.012 ↗
29. Performance of granulated foam glass concrete10.1016/j.conbuildmat.2011.10.052 ↗
30. Strength and drying shrinkage properties of self-compacting concretes incorporating multi-system blended mineral admixtures10.1016/j.conbuildmat.2010.04.015 ↗
31. Enhancing the durability properties of concrete prepared with coarse recycled aggregate10.1016/j.conbuildmat.2012.02.032 ↗
32. Effect of Granulated Blast Furnace Slag and fly ash addition on the strength properties of lightweight mortars containing waste PET aggregates10.1016/j.conbuildmat.2011.04.042 ↗
33. Influence of mineral admixtures on compressive strength, gas permeability and carbonation of high performance concrete
34. Concrete containing ternary blended binders: resistance to chloride ingress and carbonation10.1016/S0008-8846(97)00075-6 ↗
35. Use of recycled aggregates from precast concrete rejects: mechanical and durability performance10.1016/j.conbuildmat.2014.08.034 ↗
36. Evaluation of the durability of concrete made with crushed glass aggregates10.1016/j.jclepro.2012.09.021 ↗
37. Durability of recycled aggregate concrete10.1016/j.conbuildmat.2012.11.106 ↗
38. British Standard Institution. BS EN 15167-1 · 2006
39. British Standard Institution. BS EN 450-1 · 2012
40. British Standard Institution. BS EN 13263-1 · 2009
41. British Standard Institution. BS EN 934-2:2009+A1:2012 · 2009
42. Building Research Establishment Ltd · 1997
43. British Standard Institution, BS EN 206-1 · 2013
44. British Standard Institution. BS EN 12390-3 · 2009
45. British Standards Institution. BS ISO 1920-8, Testing Hardened Concrete. Determination of the Drying Shrinkage of Concrete for Samples Prepared in the Field or in the Laboratory, 2009.
46. British Standard Institution. BS 1881-208 · 1996
47. Effects of cube size and placement direction on compressive strength of self-consolidating concrete10.1016/j.conbuildmat.2014.02.008 ↗
48. British Standard Institution. BS 1881-210 · 2013
49. Carbonation of CH and C-S-H in composite cement pastes containing high amounts of BFS10.1016/j.cemconres.2009.10.020 ↗
50. Development of high volume fly ash cements for use in concrete construction10.1016/j.fuel.2004.08.029 ↗
51. Effect of different supplementary cementitious materials on mechanical properties of high performance concrete10.1016/0008-8846(94)00128-L ↗
52. Accelerated carbonation of concrete with high content of mineral additions: effect of interactions between hydration and drying10.1016/j.cemconres.2012.10.008 ↗
53. Influence of steel slag on mechanical properties and durability of concrete10.1016/j.conbuildmat.2013.06.044 ↗
54. Durability and mechanical properties of high strength concrete incorporating ultra fine Ground Granulated Blast-furnace Slag10.1016/j.conbuildmat.2012.11.052 ↗
55. Mechanical and durability properties of high performance concretes containing supplementary cementitious materials10.1016/j.conbuildmat.2009.08.045 ↗
56. Influence of recycled glass content and curing conditions on the properties of self-compacting concrete after exposure to elevated temperatures10.1016/j.cemconcomp.2011.08.010 ↗
57. Investigations on the compressive strength of silica fume concrete using statistical methods10.1016/S0008-8846(02)00787-1 ↗
58. Lightweight aggregates produced by granulation of peat-wood fly ash with alkali activator10.1016/j.minpro.2016.02.006 ↗
59. Recycling of MSWI fly ash by means of cementitious double step cold bonding pelletization: technological assessment for the production of lightweight artificial aggregates10.1016/j.jhazmat.2015.06.018 ↗
60. Coal combustion wastes reuse in low energy artificial aggregates manufacturing10.3390/ma6115000 ↗