journal article·2016-12Open access

Incorporating environmental evaluation and thermal properties of concrete mix designs

Mehdi Robati, Timothy J. McCarthy, Georgios Kokogiannakis

Abstract

One of the main challenges in sustainable design of buildings is to improve the energy efficiency of the building during its lifetime along with reducing the environmental impact of the design. Recent advances in concrete technology offer lower embodied emission through the application of supplementary cementitious materials and recycled aggregates. There are also improvements to thermal properties with the application of admixtures. However, the relationships between the environmental impact (Cradle to Gate) and thermal performance of concrete mix designs have not been researched adequately. The Green House Gas (GHG) emissions associated with each individual concrete component and its production need to be considered with greater refinement. This study correlates the impacts of selecting a concrete mix design in terms of CO2-e with resulting thermal conductivity and density at the design stage of buildings. This paper examines 90 concrete mix designs from published literature to identify their embodied emissions and thermal conductivity in order to discuss the relationship between low embodied carbon dioxide equivalents (CO2-e) emission alternatives and thermal conductivity. The embodied CO2-e of a variety concrete mix designs were quantified by compiling embodied CO2-e coefficient for each individual component in the concrete. The results show the variation in embodied CO2-e and thermal conductivity of concrete mixes. The application of readily available supplementary cementitious material can reduce embodied CO2-e (kg CO2-e) by up to 16% in comparison with general practice. Furthermore, the thermal conductivity of concrete mix is influenced by changing the density of aggregates and the proportion of cementitious materials. In completing this work the results obtained from the study are compared with six different inventory databases: ICE (Hammond et al., 2011), Crawford (2011), Alcon (2003), eTool (2014), BPIC (2014) and AusLCI (2013). The comparison identifies some inconsistencies in calculation of embodied CO2-e across the different databases. This is attributed to variation in embodied CO2-e coefficients and lack of in-depth consideration of the detailed properties of each individual concrete mix design.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycled Aggregate Concrete Performance · Concrete and Cement Materials Research · Asphalt Pavement Performance Evaluation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (77)

Show source-provided references
1. Hammond · 2011
2. Crawford · 2011
3. Alcorn · 2003
4. eTool · 2014
5. BPIC · 2014
6. AusLCI · 2016
7. ISO15673 · 2005
8. Survey · 2015
9. PCA · 2015
10. Torgal · 2011
11. Appleby · 2012
12. A life cycle inventory of structural engineering design strategies for greenhouse gas reduction10.2749/101686609788957946 ↗
13. Lemay · 2011
14. DIIS · 2013
15. ACI122R · 2014
16. CIBSE · 2006
17. Cement industry greenhouse gas emissions – management options and abatement cost10.1016/j.jclepro.2015.07.055 ↗
18. Low carbon measures for cement plant – a review
19. Worrell · 2008
20. Renewable energy in the minerals industry: a review of global potential10.1016/j.jclepro.2012.03.016 ↗
21. Recent development on the uses of alternative fuels in cement manufacturing process10.1016/j.fuel.2014.12.029 ↗
22. Pozzolanic effect of porcelain polishing residue in Portland cement10.1016/j.jclepro.2015.03.096 ↗
23. Evaluation of the durability of concrete made with crushed glass aggregates10.1016/j.jclepro.2012.09.021 ↗
24. The use of basalt aggregates in the production of concrete for the prefabrication industry: environmental impact assessment, interpretation and improvement10.1016/j.jclepro.2014.04.002 ↗
25. Greening of the concrete industry for sustainable development
26. Low carbon concrete-options for the next generation of infrastructure
27. M. Newlands, M. Jones, M. McCarthy, L. Zheng, Using fly ash to achieve low embodied CO2 concrete, in: Proceedings of EUROCOALASH 2012 Conference, 2012.
28. Novel cements: low energy, low carbon cements
29. McLeod · 2005
30. Environmental impact and life cycle assessment (LCA) of traditional and ‘green’ concretes: literature review and theoretical calculations10.1016/j.cemconcomp.2012.01.004 ↗
31. The potential of fly ash: the future looks bright
32. Environmental-benign utilisation of fly ash as low-cost adsorbents10.1016/j.jhazmat.2006.01.067 ↗
33. AS3582.1 · 2016
34. High volume fly ash concrete
35. High-performance, high-volume fly ash concrete
36. Use of fly ash to achieve enhanced sustainability in green star
37. A life-cycle approach to environmental, mechanical, and durability properties of “green” concrete mixes with rice husk ash10.1016/j.jclepro.2015.06.029 ↗
38. Enhancing the durability of flooded low-capacity soils by utilizing lime-activated ground granulated blastfurnace slag (GGBS)10.1016/j.enggeo.2011.07.009 ↗
39. Reducing CO2 emissions
40. Virgalitte · 1995
41. du béton · 2011
42. Design and performance evaluation of ultra-lightweight geopolymer concrete10.1016/j.matdes.2015.09.167 ↗
43. Berndt · 2013
44. Low carbon and low embodied energy materials in buildings: a review10.1016/j.rser.2013.03.017 ↗
45. Technical and commercial progress in the adoption of geopolymer cement10.1016/j.mineng.2011.09.009 ↗
46. Duxson · 2008
47. Eco-efficient construction and building materials10.1080/01446193.2013.833665 ↗
48. Use of aggregates from recycled construction and demolition waste in concrete10.1016/j.resconrec.2006.05.010 ↗
49. Green house gas emissions due to concrete manufacture10.1065/lca2007.05.327 ↗
50. Impact of fly ash content and fly ash transportation distance on embodied greenhouse gas emissions and water consumption in concrete10.1007/s11367-009-0105-5 ↗
51. CCAA · 2015
52. Use of furnace bottom ash for producing lightweight aggregate concrete with thermal insulation properties10.1016/j.jclepro.2015.03.007 ↗
53. Influence of concrete mix design on CO2 emissions for large wind turbine foundations10.1016/j.renene.2015.05.002 ↗
54. Development of ultra-lightweight cement composites with low thermal conductivity and high specific strength for energy efficient buildings10.1016/j.conbuildmat.2015.04.004 ↗
55. Damdelen · 2015
56. Evaluation of thermal conductivity for thermally insulated concretes10.1016/j.enbuild.2013.01.043 ↗
57. Comparative environmental assessment of natural and recycled aggregate concrete10.1016/j.wasman.2010.04.012 ↗
58. Multicriteria optimization of natural and recycled aggregate concrete for structural use10.1016/j.jclepro.2014.10.070 ↗
59. Impact of supplementary cementitious material content and transportation distance on greenhouse gas emissions embodied in concrete
60. Rouwette · 2012
61. Sustainable Aggregates – CO2 Emission Factor Study
62. ADAA · 2016
63. AGO · 2004
64. Chandra · 2002
65. Neville · 2012
66. Industrially interesting approaches to “low-CO2” cements10.1016/j.cemconres.2004.01.021 ↗
67. Sustainable development and climate change initiatives10.1016/j.cemconres.2007.09.008 ↗
68. Worrell · 2008
69. Whiting · 2012
70. Srinivasreddy · 2013
71. Crossin · 2012
72. Identification of parameters for embodied energy measurement: a literature review10.1016/j.enbuild.2010.02.016 ↗
73. Validation of a hybrid life-cycle inventory analysis method10.1016/j.jenvman.2007.03.024 ↗
74. Thermal conductivity enhancement of phase change materials for thermal energy storage: a review10.1016/j.rser.2010.08.007 ↗
75. Review on thermal energy storage with phase change materials (PCMs) in building applications10.1016/j.apenergy.2011.08.025 ↗
76. Workability, and mechanical, acoustic and thermal properties of lightweight aggregate concrete with a high volume of entrained air10.1016/j.conbuildmat.2011.08.067 ↗
77. Comparative environmental assessment of natural and recycled aggregate concrete10.1016/j.wasman.2010.04.012 ↗