journal article·2017-02Open access

Improving moisture sensitivity and mechanical properties of sulfur extended asphalt mixture by nano-antistripping agent

Masoud Faramarzi, Behnam Golestani, K. Wayne Lee

Abstract

Abstract Moisture damage and fatigue cracking are the most common defects of Sulfur Extended Asphalts (SEAs). Moisture damage in asphaltic mixtures occurs due to the weak cohesion and adhesion that causes the creation of different forms of pavement defects. Various methods have been employed in order to enhance the asphalt mixture’s resistance to the moisture damage. One of the main methods is the addition of antistriping agents (ASAs) which reinforce the bonding between asphalt binder and aggregates. In this study, a series of laboratory testing has been performed to appraise the mechanical properties and moisture sensitivity of the SEA mixtures modified with ASA. In addition, Googas as a new generation of modified-sulfur-mix additive and ASA (nanotechnology Zycotherm) were employed to make warm-mix asphalt (WMA) specimens, through modification of neat asphalt (PG 64-22). Furthermore, four types of mixtures with different additive proportions, containing ASA and sulfur, were prepared, and the moisture susceptibility, resilient modulus, rutting resistance, and fatigue behavior were measured. Obtained results, demonstrated the improvement of mechanical characteristics due to the implementation of the modified sulfur, exclusively for rutting phenomenon. Moreover, nanotechnology Zycotherm (NZ) as an ASA enhanced the adhesion between aggregates and sulfur-extended asphalt; thus, the resistance of SEAs against moisture damage and fatigue cracking improved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Structural mechanics and materials · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Nanoclay application to asphalt concrete: characterization of polymer and linear nanocomposite-modified asphalt binder and mixture10.1016/j.conbuildmat.2015.05.019 ↗
2. Performance evaluation of linear and nonlinear nanocomposite modified asphalts10.1016/j.conbuildmat.2012.03.010 ↗
3. Characterization of CNTs-modified HMA’s mechanical properties10.1016/j.conbuildmat.2015.03.035 ↗
4. Effect of moisture conditioning on fatigue properties of sulphur modified asphalt mixtures
5. T.W. Kennedy, R. Haas, P. Smith, G. Kennepohl, E. Hignell, Engineering evaluation of sulphur-asphalt mixtures. Transport. Res. Rec. (659) (1977).
6. I. Deme, B. Kennedy, Use of sulphur in asphalt pavements, in: Symposium on Pavement Surface Characteristics [of Roads and Airports], 5th, 2004, Toronto, Ontario, Canada, 2004.
7. Laboratory evaluation of sulfur-modified warm mix
8. An investigation into the seismic behavior of single-story concrete frames equipped with metallic yielding dampers
9. Laboratory performance characteristics of sulfur-modified warm-mix asphalt10.1061/(ASCE)MT.1943-5533.0000303 ↗
10. J.A. DiVito, G.R. Morris, Silane pretreatment of mineral aggregate to prevent stripping in flexible pavements, 1982.
11. Estimating moisture sensitivity of warm mix asphalt modified with zycosoil as an antistrip agent using surface free energy method10.1061/(ASCE)MT.1943-5533.0000455 ↗
12. Effect of sulphur upon some of the properties of asphalts
13. Conventional paving mixes with sulphur-asphalt binders
14. Field evaluation of sulfur-extended asphalt pavements
15. Performance properties of sulphur extended asphalt mixtures with modified sulphur pellets.
16. D.H. Timm, M.M. Robbins, J.R. Willis, N. Tran, A.J. Taylor, Evaluation of Mixture Performance and Structural Capacity of Pavements Utilizing Shell Thiopave®: Phase II: Construction, Laboratory Evaluation and Full-Scale Testing of Thiopave® Test Sections-Final Report, 2012.
17. Kentucky Product Evaluation List. “Shell Thiopave.” Available from: (June 2010).
18. D. Strickland, J. Colange, P. Shaw, N. Pugh, A Study of the Low-Temperature Properties of Sulphur Extended Asphalt Mixtures. Canadian Technical Asphalt Association, 2008.
19. Performance and cost-effectiveness of sustainable technologies in flexible pavements using the mechanistic-empirical pavement design guide10.1061/(ASCE)MT.1943-5533.0000376 ↗
20. Asphalt Institute SP-1 “Superpave Performance Graded Asphalt”, (1996) p.
21. Use of Surface Free Energy method to evaluate the moisture susceptibility of sulfur extended asphalts modified with antistripping agents10.1016/j.conbuildmat.2015.08.123 ↗
22. Getting to net zero energy building: investigating the role of vehicle to home technology10.1016/j.enbuild.2016.08.044 ↗
23. The research for SBS and SBR compound modified asphalts with polyphosphoric acid and sulfur10.1016/j.conbuildmat.2013.03.001 ↗
24. Rheological properties and storage stability of bitumen/SBS/montmorillonite composites10.1016/j.conbuildmat.2009.08.032 ↗
25. ASTM Standard D5/D5M, Standard Test Method for Penetration of Bituminous Materials, ASTM International, West Conshohocken, 2013.
26. ASTM Standard D36/D36M, Standard Test Method for Softening Point of Asphalt (Ring-and-Ball Apparatus). ASTM International, West Conshohocken, 2009.
27. ASTM D 113-99, Standard Test Method for ductility Test, ASTM International, West Conshohocken, 2002.
28. ASTM-D4402, Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer. American Society for Testing and Materials, 2006.
29. ASTM D4123, Standard Test Method for Indirect Tension Test for Resilient Modulus of Bituminous Mixtures Annual book of ASTM Standards, ASTM International, West Conshohocken, 2000.
30. J. Yang, C. Yin, Laboratory Study of Porous Asphalt Mixture Made with Rubber Bitumen. Material, Design, Construction, Maintenance, and Testing of Pavement (Geotechnical special publication NO. 195). American Society of Civil Engineers (ASCE), Changsha, 2009, pp. 22–31.10.1061/41042(349)4 ↗
31. Aashto · 2003
32. Fatigue behavior of SMA and HMA mixtures10.1016/j.conbuildmat.2009.12.025 ↗
33. Aashto · 2011
34. Carbon nanotubes-modified asphalt binder: preparation and characterization
35. Golestani · 2015
36. Investigation on the effects of recycled asphalt shingle as an additive to hot-mix asphalt
37. Temporary networks in polymer-modified asphalts10.1002/pen.20246 ↗
38. BIM-based damage estimation of buildings under earthquake loading condition10.1016/j.proeng.2016.04.136 ↗
39. An optimum selection strategy of reflective cracking mitigation methods for an asphalt concrete overlay over flexible pavements