Computational homogenization for thermal conduction in heterogeneous concrete after mechanical stress
Source abstract
Abstract
Abstract Concrete structures are subjected to various loadings during their service life and their internal structures will be changed, resulting variations in mechanical and thermo-physical properties. To investigate the effect of mechanical stress on thermal conduction, a computational homogenization method from a mesoscopic perspective was proposed in the present work. In the simulations, concrete was considered as a three-phase composite material consisting of aggregate, mortar matrix and the interfacial transition zones (ITZs) between them. The mechanical analysis was conducted firstly to study the damage distribution within concrete. The outcomes of mechanical computation were then used as the initial input data in the thermal conduction computation. The equivalent thermal conductivity of damaged element was homogenized by a composite mechanical method based on damage and the initial thermal conductivity of sound material. Accordingly, a meso-scale model in which the mechanical and thermal behavior were one-way coupled was built. The method was calibrated by comparing the numerical results with the available experimentally measured ones. Based on the verified simulation method, effective thermal conductivity (ETC) and temperature field of concrete subjected to different loading levels were calculated. Besides, the effects of loading type (compressive and tensile loadings) on ETC and temperature field of concrete were studied. It is found that ETC of concrete decreases with an increasing loading level. In addition, the effect of tensile loading on thermal behavior depends on whether the direction of thermal conduction is parallel or perpendicular to loadings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Numerical study of the influence of material structure on effective thermal conductivity of concrete10.1080/01457632.2011.635988 ↗
2. Permeable porosity and thermal conductivity of construction materials10.1061/(ASCE)0899-1561(2004)16:4(322) ↗
3. Determination of effective thermal conductivity of asphalt concrete with random aggregate microstructure10.1061/(ASCE)MT.1943-5533.0001313 ↗
4. Damage effects on concrete performance and microstructure10.1016/j.cemconcomp.2003.05.001 ↗
5. Influence of damage degree on self-healing of concrete10.1016/j.conbuildmat.2007.02.006 ↗
6. Impact load-induced micro-structural damage and micro-structure associated mechanical response of concrete made with different surface roughness and porosity aggregates10.1016/j.cemconres.2011.09.015 ↗
7. Nanoscale mechanical properties of concrete containing blast furnace slag and fly ash before and after thermal damage10.1016/j.cemconcomp.2012.09.003 ↗
8. Effect of pre-induced cyclic damage on the mechanical properties of concrete exposed to elevated temperatures10.1016/j.conbuildmat.2016.03.028 ↗
9. Effect of damage on moisture transport in concrete10.1061/(ASCE)MT.1943-5533.0001211 ↗
10. Numerical simulation of moisture transport in concrete based on a pore size distribution model10.1016/j.cemconres.2014.08.003 ↗
11. The effect of external load on internal relative humidity in concrete10.1016/j.cemconres.2014.07.011 ↗
12. Effect of uniaxial compressive loading on gas permeability and chloride diffusion coefficient of concrete and their relationship10.1016/j.cemconres.2013.05.013 ↗
13. Effects and interactions of temperature and stress-level related damage on permeability of concrete10.1016/j.cemconres.2006.09.015 ↗
14. Influence of drying-induced microcracking and related size effects on mass transport properties of concrete10.1016/j.cemconres.2014.10.018 ↗
15. Influence of service loading and the resulting micro-cracks on chloride resistance of concrete10.1016/j.conbuildmat.2016.01.005 ↗
16. Chloride diffusion in concrete subjected to compressive loading10.1680/macr.14.00048 ↗
17. Chloride permeability of damaged high-performance fiber-reinforced cement composite by repeated compressive loads10.3390/ma7085802 ↗
18. Simulation of chloride migration in compression-induced damage in concrete10.1061/(ASCE)MT.1943-5533.0000458 ↗
19. Effect of external loads on chloride transport in concrete10.1061/(ASCE)MT.1943-5533.0000265 ↗
20. Effect of cracks on hygric and thermal characteristics of concrete10.1002/bapi.200810058 ↗
21. Chloride diffusivity in saturated cement paste subjected to external mechanical loadings10.1016/j.oceaneng.2014.11.028 ↗
22. Multi-scale analytical theory of the diffusivity of concrete subjected to mechanical stress10.1016/j.conbuildmat.2015.07.123 ↗
23. The effect of compressive stress on thermal and hygric properties of Portland cement mortar in wide temperature and moisture ranges10.1016/S0008-8846(00)00310-0 ↗
24. Change of thermal conductivity of concrete caused by brittle damage evolution10.1002/bapi.200810057 ↗
25. Mesoscale model for thermal conductivity of concrete10.1016/j.conbuildmat.2015.08.106 ↗
26. Effect of cracks on thermal conductivity10.1177/002199837801200405 ↗
27. Effect of cracks on the thermal resistance of aligned fiber composites10.1063/1.1486052 ↗
28. Estimation of poromechanical and thermal conductivity properties of unsaturated isotropically microcracked cement pastes10.1002/nag.969 ↗
29. Effects of debonding on thermal conduction and humidity diffusion at mesoscale of concrete10.1002/pamm.201410232 ↗
30. Mesoscopic numerical simulation of effective thermal conductivity of tensile cracked concrete10.1016/j.conbuildmat.2015.07.117 ↗
31. A concrete homogenisation technique at meso-scale level accounting for damaging behaviour of cement paste and aggregates10.1016/j.compstruc.2016.05.009 ↗
32. Composite damage models for diffusivity of distressed materials10.1061/(ASCE)0899-1561(2005)17:3(286) ↗
33. The thermal conductivity of foams. I: models for heat conduction10.1088/0022-3727/26/5/003 ↗
34. Choy · 2016
35. Lattice modeling of chloride diffusion in sound and cracked concrete10.1016/j.cemconcomp.2013.05.003 ↗
36. Effect of tensile cracking on diffusivity of mortar: 3D numerical modelling10.1016/j.commatsci.2009.07.005 ↗
37. A meso-scale numerical method for the simulation of chloride diffusivity in concrete10.1016/j.finel.2014.03.002 ↗
38. Random particle model for fracture of aggregate or fiber composites10.1061/(ASCE)0733-9399(1990)116:8(1686) ↗
39. Lattice modelling of corrosion induced cracking and bond in reinforced concrete10.1016/j.cemconcomp.2011.05.005 ↗
40. Investigation on the cracking behavior of concrete cover induced by corner located rebar corrosion10.1016/j.engfailanal.2015.03.019 ↗
41. Meso-element equivalent method for the simulation of macro mechanical properties of concrete10.1177/1056789512457096 ↗
42. Modeling the cracking of cover concrete due to non-uniform corrosion of reinforcement10.1016/j.corsci.2014.08.025 ↗
43. Effect of cracks on concrete diffusivity: a meso-scale numerical study10.1016/j.oceaneng.2015.08.054 ↗
44. Multiscale modeling of concrete10.1007/s11831-011-9063-8 ↗
45. Factors affecting the thermal properties of concrete and applicability of its prediction models10.1016/S0360-1323(01)00061-0 ↗
46. Numerical study of ITZ contribution on mechanical behavior and diffusivity of mortars10.1016/j.commatsci.2015.02.016 ↗
47. How to consider the Interfacial Transition Zones in the finite element modelling of concrete?10.1016/j.cemconres.2014.01.009 ↗
48. Meso-scale numerical investigation on cracking of cover concrete induced by corrosion of reinforcing steel10.1016/j.engfailanal.2014.01.011 ↗
49. Cracking of the concrete cover due to reinforcement corrosion: a two-dimensional lattice model study10.1016/j.conbuildmat.2013.03.063 ↗
50. A plastic-damage model for concrete10.1016/0020-7683(89)90050-4 ↗
51. Plastic-damage model for cyclic loading of concrete structures10.1061/(ASCE)0733-9399(1998)124:8(892) ↗
52. Size effect tests of normal-strength and high-strength RC columns subjected to axial compressive loading10.1016/j.engstruct.2015.11.022 ↗
53. A meso-level investigation into the explosive spalling mechanism of high-performance concrete under fire exposure10.1016/j.cemconres.2014.07.010 ↗
54. International Organization for Standardization · 1999
55. 2014