The use of zeolite, lightweight aggregate and boiler slag in restoration renders
Source abstract
Abstract
Abstract For the protection of walls against salt-damp, various renders with different aggregates are proposed. The purpose of this study is to investigate the impact of natural zeolite, lightweight aggregate and boiler slag additives in the production of cement-lime renders meant for salty walls. The article presents laboratory examinations of their basic physical parameters such as water absorption, capillary absorption, water vapour permeability, absorptivity, sorptivity, density, total porosity, compressive and flexural strength. In addition to studies of the basic physical properties of the renders, frost and chemical corrosion resistance tests were conducted. Special additives to improve the properties were used such as hydrophobizer, methyl cellulose – a water-retaining additive, ethylene vinyl acetate copolymer powder, as well as a redispersive additive to improve adhesion. Apart from white Portland cement CEM I 52.5 R, blast furnace cement CEM III was also used, wherein the composition contains coal ash. The highest efficiency of render corrosion protection was obtained by the renders with Portland Cement CEM I 52.5 R and boiler slag. The experimental results showed that the mortars modified by natural zeolites and boiler slag, thanks to their porous structure, are distinguished by good sorption properties and can accumulate in themselves a sufficient amount of salt and ice.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Building materials and conservation · Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Pore structure in mortars applied on restoration. Effect on properties relevant to decay of granite buildings10.1016/S0008-8846(02)00887-6 ↗
2. Study of ancient mortars from Salassos (Turkey) in view of their conservation10.1016/S0008-8846(02)00807-4 ↗
3. Analysis of the physical properties of hydrophobised lightweight-aggregate mortars
4. WTA Merkblatt 2-9-04 Sanierputzsysteme.
5. Renovation plasters in view standards PN-EN 998-1:2004 and WTA nr 2-9-04 (in Polish)
6. Selection of plasters and renders for salt laden masonry substrates10.1016/j.conbuildmat.2008.09.013 ↗
7. Salt transport and storage parameters of renovation plasters and their possible effects on restored buildings’ walls10.1016/j.conbuildmat.2010.09.034 ↗
8. Advanced Byzantine cement based composites resisting earthquake stresses: the crushed brick/lime mortars of Justinian’s Hagia Sophia10.1016/S0950-0618(02)00005-3 ↗
9. Masonry repair lime-based mortars: factors affecting the mechanical behavior10.1016/S0008-8846(03)00210-2 ↗
10. Mechanical and durability properties of concretes incorporating natural zeolite10.1016/j.acme.2016.03.013 ↗
11. Synthetic zeolites from fly ash for an effective trapping of BTX in gas stream10.1016/j.micromeso.2015.10.032 ↗
12. Evaluation of natural zeolite as a viscosity modifying agent for cement-based grotus10.1016/j.cemconres.2008.03.007 ↗
13. Factors affecting the thermal properties of concrete and applicability of its prediction models10.1016/S0360-1323(01)00061-0 ↗
14. Characterization of lightweight mortars containing wood processing by-products waste10.1016/j.conbuildmat.2016.07.011 ↗
15. Mechanical and physical properties of hydrophobized lightweight aggregate concrete with sewage sludge
16. Utilization of coal combustion by-products in sustainable construction materials10.1016/j.resconrec.2010.06.011 ↗
17. Mechanical and durability related properties of high performance concrete made with coal cinder and waste foundry sand10.1016/j.conbuildmat.2016.05.148 ↗
18. Coal fly ash as a resource for rare earth elements10.1007/s11356-015-4111-9 ↗
19. Municipal incinerated bottom ash characteristics and potential for use as aggregate in concrete, Cons10.1016/j.conbuildmat.2016.09.132 ↗
20. Bakoshi · 1998
21. An overview of geopolymers derived from industrial by-products10.1016/j.conbuildmat.2016.09.136 ↗
22. Workability and strength of lignite bottom ash geopolymer mortar10.1016/j.jhazmat.2009.01.120 ↗
23. High-calcium bottom ash geopolymer: sorptivity, pore size, and resistance to sodium sulfate attack10.1061/(ASCE)MT.1943-5533.0000560 ↗
24. D. Barnat-Hunek, B. Klimek, W. Franus, Restoration plaster. Application no. A1 (21) 410436 Polish Patent Office’s Official Gazette, 44(13) (2016) 20–20.
25. EN 197-1, Cement – Part 1: Composition, specifications and conformity criteria for common cements.
26. EN 459-1:2015-06, Building lime – Part 1: Definitions, requirements and compatibility criteria.
27. Sorption capacities of natural and synthetic zeolites for Cu(II) ions10.15244/pjoes/30923 ↗
28. Characterization of zeolites and their use as adsorbents of petroleum substances
29. Light weight pozzolanic materials used in mortars: evaluation of their influence on density, mechanical strength and water absorption10.1016/j.cemconcomp.2008.11.003 ↗
30. Effects of hydrophobic treatment on thermo physical properties of light weight mortars10.1016/j.expthermflusci.2004.12.002 ↗
31. Epoxy monomers consolidant for lime plaster cured via a redox activated cationic polymerization10.1016/j.culher.2014.01.003 ↗
32. Protection provided by surface treatments against chloride induced corrosion10.1007/BF02480469 ↗
33. EN 1936:2010, Natural stone testing methods – Determining density and bulk density and of total and open porosity.
34. EN 1015-10: 2001P, Methods of testing mortar for masonry Part 10: Determining dry density of hardened mortar.
35. EN 1015-18, Methods of testing mortar for masonry Part 18: Determining water absorption coefficient due to capillary raising of hardened mortar.
36. EN ISO 7783: 2012, Paints and varnishes – Determination of water-vapour transmission properties – Cup method.
37. Increased water repellence of ceramic buildings by hydrophobisation using high concentration of organic solvents10.1016/j.enbuild.2015.06.048 ↗
38. Moisture characterization of cementitious material properties: assessment of water vapor sorption isotherm and permeability variation with ages10.1016/j.conbuildmat.2015.03.030 ↗
39. EN 13755:2008, Natural stone test methods. Determination of water absorption at atmospheric pressure.
40. ASTM C 1585-04, Standard test method for measurement of rate of absorption of water by hydraulic cement concretes.
41. EN 1015-11:2001P, Methods of testing mortar for masonry Part 11: Determining flexural strength and compressive strength of hardened mortar.
42. EN 12012:2007, Methods of testing masonry. Determining resistance to freeze-thaw of ceramic masonry.
43. EN 12370: 2001, Methods of testing natural stone. Determining resistance to crystallization of salts.
44. EN 206:2014-04, Concrete – Specification, performance, production and conformity.
45. EN 1015-7, Methods of testing mortar for masonry. Determining air content of fresh mortar.
46. Capillary rise phenomenon in aerated concrete. Monitoring and simulations
47. Salt Crystallization-Induced Damage of Cement Mortar Microstructure Investigated By Multi-Cycle Mercury Intrusion