Investigation of effects of Portland cement fineness and alkali content on concrete plastic shrinkage cracking
Source abstract
Abstract
From a material viewpoint, modern concrete’s frequent propensity to plastic shrinkage cracking can be attributable to a combination of low water-binder ratio use and ever-changing properties of binding materials. To obtain a better understanding of this phenomenon, this paper explores the effects of cement fineness and alkali content on the plastic shrinkage cracking of concrete manufactured with two water-binder ratios. Results indicate that within the range 275–385 m2/kg, cement specific surface area is approximately directly and inversely proportional to hydration rate and evaporation rate respectively; a trend generally leading to higher plastic shrinkage and resulting areas of plastic cracking. Similar effects were observed for alkali contents which resulted in increased levels of plastic shrinkage. Furthermore, while decreasing crack tendency was noted as alkali content increased from 0.4 to 0.8% by mass of cement, further increases in alkali content caused significant decreases of compressive strength and slump; thereby lowering overall concrete performance. It is also found that plastic shrinkage cracking is closely related to the kinetics of plastic shrinkage. In summary, the experimental programme confirmed that cement with relatively low surface area (less than 340 m2/kg) and low alkali content (less than 0.8%) is preferred for modern concretes with minimal plastic cracking problems.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Properties and Behavior · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Effect of the water saturation of aggregates on the shrinkage induced cracking risk of concrete at early age10.1016/j.cemconcomp.2014.02.006 ↗
2. Impact of admixtures on the plastic shrinkage cracking of self-compacting concrete10.1016/j.cemconcomp.2013.11.002 ↗
3. Maintenance and durability of structures
4. Aitcin · 1998
5. Plastic shrinkage
6. Factors contributing to early age shrinkage cracking of slag concretes subjected to 7-days moist curing10.1617/s11527-007-9269-2 ↗
7. The effect of reinforcement on early-age cracking due to autogenous shrinkage and thermal effects10.1016/S0958-9465(03)00078-7 ↗
8. High performance concrete- An overview10.1007/BF02486473 ↗
9. Effect of mix proportions on plastic shrinkage cracking of concrete in hot environments10.1016/S0950-0618(98)00019-1 ↗
10. On the measurement of free deformation of early age cement paste and concrete10.1016/S0958-9465(03)00065-9 ↗
11. Modelling the severity of plastic shrinkage cracking in concrete10.1016/j.cemconres.2013.02.003 ↗
12. Early age deformations of concrete with high content of mineral additions10.1016/j.conbuildmat.2010.11.077 ↗
13. Zhong · 2012
14. Cements of yesterday and today concrete tomorrow
15. Mehta · 2005
16. Sustainable cement production—present and future10.1016/j.cemconres.2011.03.019 ↗
17. Influence of key parameters on drying shrinkage of cementitious materials10.1016/S0008-8846(99)00156-8 ↗
18. Crack propagation in concrete at very early ages10.1680/macr.13.00205 ↗
19. Influence of mix proportions, plasticizers and superplasticizers on creep and drying shrinkage of concrete10.1680/macr.1989.41.148.145 ↗
20. Influence of shrinkage-reducing admixtures on the reduction of plastic shrinkage cracking in concrete10.1016/j.cemconres.2008.11.011 ↗
21. Plastic shrinkage cracking in concrete slabs, Part-1 A numerical model10.1680/macr.2006.58.8.505 ↗
22. Early age concrete––properties and performance10.1016/j.cemconcomp.2004.04.001 ↗
23. Contribution of mixture design to chemical and autogenous shrinkage of concrete at early ages10.1016/j.cemconres.2004.05.009 ↗
24. GB/T50080, Standard for test method of performance on ordinary fresh concrete, Standardization Administration of the People's Republic of China, 2002, 58 pages.
25. GB/T-50082, Standard for test methods of long-term performance and durability of ordinary concrete, Standardization Administration of the People's Republic of China, 2009, 51 pages.
26. ASTM:C1579, Standard test method for evaluating plastic shrinkage cracking of retrained fiber reinforced concrete (Using a steel form insert), 2013, ASTM. 7 pages.
27. Taylor · 1997
28. A.M. Neville, Properties of Concrete. 4th Ed., Pearson, 1995.
29. Influence of mix proportions on microstructure and gas permeability of cement pastes and mortars10.1016/j.cemconres.2011.11.019 ↗
30. Total shrinkage, oxygen permeability, and chloride ion penetration in concrete made with white Portland cement and blast-furnace slag10.1016/j.conbuildmat.2012.07.076 ↗
31. On the action of capillary pressure10.1016/0008-8846(76)90050-8 ↗
32. Mindess · 2003
33. Typical plastic shrinkage cracking behaviour of concrete10.1680/macr.12.00139 ↗
34. Influence of sodium aluminate on cement hydration and concrete properties10.1016/j.conbuildmat.2014.04.089 ↗
35. Pippard · 1966
36. High-performance concrete demystified
37. Simulation of capillary shrinkage cracking in cement-like materials10.1016/j.cemconcomp.2009.05.004 ↗
38. ACI-305R, Hot weather concreting, ACI, 1999, 20 pages.
39. P.J. Nixon, D.S. Lane, Experience from testing of the alkali reactivity of European aggregates according to several concrete prism test methods, BRE, 2006, 73 pages.
40. Mechanism of preventing the alkali–aggregate reaction in alkali activated cement concretes10.1016/j.cemconcomp.2013.10.003 ↗