Experimental investigation of composite beams reinforced with GFRP I-beam and steel bars
Source abstract
Abstract
Abstract This paper presents results of an experimental study on the flexural behaviour of a composite beam, which is reinforced with longitudinal tensile steel bars as well as glass fibre reinforced polymer (GFRP) pultruded I-beam encased in concrete. Five beam specimens, including one traditional reinforced concrete (RC) beam and four composite beams, were cast and tested under four-point bending. The variables involved in the composite beams include the type of longitudinal tensile bars (steel bars and GFRP bars) and the location of the I-beam in the cross-section (middle and a shift of 30 mm towards the tension region). The test results presented in this study show that the proposed composite beams have a very ductile response due to the existence of the tensile steel bars, and the yield point of the composite beam is controlled by the tensile steel bars. The ultimate load of the proposed composite beam in this study is higher than the traditional RC beam in this study, and the ultimate load is governed by the encased I-beam. When GFRP bars were used to replace the tensile steel bars to reinforce the composite beams, the brittle failure of GFRP bars caused lack of ductility of the beam members, and both the stiffness and ultimate load were reduced significantly. Compared with steel bars, the slip between the concrete and the I-beam was also increased when GFRP bars were used. The different location of the I-beam has little effect on the flexural response.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. FRP-strengthened RC beams. II: Assessment of debonding strength models10.1016/S0141-0296(01)00106-7 ↗
2. Shear capacity of FRP-strengthened RC beams: FRP debonding10.1016/S0950-0618(02)00091-0 ↗
3. Behaviour of FRP-jacketed circular steel tubes and cylindrical shells under axial compression10.1016/j.conbuildmat.2006.06.016 ↗
4. Durability based design of FRP jackets for seismic retrofit10.1016/j.compstruct.2006.07.003 ↗
5. Axial compressive behaviour of GFRP tube reinforced concrete columns10.1016/j.conbuildmat.2015.02.025 ↗
6. Behaviour of perforated GFRP tubes under axial compression10.1016/j.tws.2015.06.019 ↗
7. Seismic flexural behavior of concrete connections reinforced with CFRP bars and grids10.1016/j.compstruct.2011.04.009 ↗
8. Short and long-term cracking behaviour of GFRP reinforced concrete beams10.1016/j.compositesb.2015.03.024 ↗
9. Recent all-composite and hybrid fibre-reinforced polymer bridges and buildings10.1002/pse.66 ↗
10. Bolted connections of pultruded GFRP: implications of geometric characteristics on net section failure10.1016/j.compstruct.2015.06.048 ↗
11. Hybrid FRP-UHPFRC composite girders: Part 1 – Experimental and numerical approach10.1016/j.compstruct.2014.10.038 ↗
12. Testing of hybrid FRP composite beams in bending10.1016/j.compositesb.2003.08.010 ↗
13. Indicative performance of fiber reinforced polymer (FRP) encased beam in flexure10.1016/j.conbuildmat.2013.07.013 ↗
14. Structural performances of concrete beams with hybrid (fiber-reinforced polymer-steel) reinforcements10.1061/(ASCE)1090-0268(2002)6:2(133) ↗
15. Experimental study of hybrid FRP reinforced concrete beams10.1016/j.engstruct.2010.08.028 ↗
16. Flexural behavior of GFRP-reinforced concrete encased steel composite beams10.1016/j.conbuildmat.2011.08.058 ↗
17. Flexural behavior of FRP-HSC-steel composite beams10.1016/j.tws.2014.03.011 ↗
18. Structural performance and serviceability of concrete beams reinforced with hybrid (GFRP and steel) bars10.1016/j.conbuildmat.2015.08.063 ↗
19. Finite element modeling of reinforced concrete beams with a hybrid combination of steel and aramid reinforcement10.1016/j.matdes.2014.10.004 ↗
20. Flexural behavior of hybrid FRP/steel reinforced concrete beams10.1016/j.compstruct.2015.03.073 ↗
21. Flexural behavior of concrete-filled fiber-reinforced polymer circular tubes10.1061/(ASCE)1090-0268(2002)6:2(123) ↗
22. Flexural behavior of hybrid FRP-concrete-steel double-skin tubular members10.1061/(ASCE)1090-0268(2006)10:5(443) ↗
23. AS 1391-2007 · 2007
24. Treadwell: Custom Fibreglass Reinforced Plastic (FRP) & Underfoot Products, 58 Deeds Rd, North Plympton, SA Australia. (accessed on April 2016).
25. ASTM D7565/D7565M-10 · 2010
26. ASTM D695 · 2002
27. ISO 527-1 · 1996
28. A.E. Naaman, S.M. Jeong, Structural ductility of concrete beams prestressed with FRP tendons, in: Proceedings of the Second International RILEM Symposium (FRPRCS-2): Non-metallic (FRP) for Concrete Structures Ghent, Belgium, 1995, pp. 379–86.
29. Ductility of concrete beams reinforced with FRP bars and steel fibers10.1177/002199839903301902 ↗
30. Ductility evaluation of prestressed concrete beams with CFRP tendons10.1177/0731684404033492 ↗