journal article·2017-10

Studies on enhanced thermally stable high strength concrete incorporating silica nanoparticles

R. Kumar, S. Singh, L.P. Singh

Publisher page

Abstract

Abstract The performance of silica nanoparticles incorporated high strength concrete (SNPs-HSC) has been evaluated under elevated temperature conditions by exposing up to 800 °C, followed by cooling to ambient temperature before performing experiments. Time-temperature studies revealed that incorporation of silica nanoparticles (SNPs) in concrete mix delays the heat transfer by 11%, 18%, 22% and 15% at 200 °C, 400 °C, 600 °C and 800 °C respectively thereby, decreasing the rate of degradation as compared to the conventional high strength concrete (HSC). A reduction in weight loss was observed in SNPs-HSC specimens after exposure to 200 °C, 600 °C, and 800 °C; whereas at 400 °C the weight loss quantity was ∼3.5% higher than the control HSC specimens due to the evaporation of water from calcium silicate hydrate (C-S-H) gel. On exposure up to 400 °C for 2 h, the compressive strength and split-tensile strength increased by 40% and 13% respectively, for SNPs-HSC specimens, whereas in control HSC specimen’s strength didn’t increase after 200 °C. A higher residual compressive (7%) and split-tensile strength (8%) was found to be in SNPs-HSC specimens exposed to 800 °C for 2 h as compared to the control HSC specimens. The stress-strain curves revealed that SNPs-HSC specimens exhibits brittle failure up to 600 °C whereas in control HSC brittle failure was observed only up to 400 °C. Microstructural studies performed on the samples taken from the core of the 400 °C exposed SNPs-HSC revealed the formation of higher C-S-H content and lower amount of calcium hydroxide (CH) leading to their enhanced mechanical and thermal stability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fire effects on concrete materials · Concrete and Cement Materials Research · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Stress-strain curves for high strength concrete at elevated temperatures10.1061/(ASCE)0899-1561(2004)16:1(84) ↗
2. State-of-the-art report on high-strength concrete (ACI 363R-92)
3. Spalling in high strength concrete exposed to fire-concerns, causes, critical parameters and cures
4. Residual mechanical properties of high-strength concretes10.1061/(ASCE)0899-1561(2010)22:1(59) ↗
5. Effects of silica fume addition and water to cement ratio on the properties of high-strength concrete after exposure to high temperatures10.1016/j.cemconcomp.2007.06.003 ↗
6. Mechanical properties of high-strength concrete after fire10.1016/j.cemconres.2003.11.007 ↗
7. Residual stress-strain relationship for concrete after exposure to high temperatures10.1016/j.cemconres.2006.05.029 ↗
8. Performance of high strength concretes at elevated temperatures10.1016/j.scient.2011.09.001 ↗
9. Effect of high temperature on tensile strength of different types of high-strength concrete
10. Stress–strain behaviour of high-strength concrete at elevated temperatures10.1680/macr.2005.57.9.535 ↗
11. Effect of heat-induced chemical degradation on the residual mechanical properties of ultrahigh-performance fiber-reinforced concrete
12. Effect of temperature on thermal properties of high-strength concrete10.1061/(ASCE)0899-1561(2003)15:2(101) ↗
13. Thermal properties of concrete at elevated temperatures
14. Properties of concrete at elevated temperatures10.1155/2014/468510 ↗
15. The development of high-strength mortars with improved thermal and acid resistance10.1016/j.cemconres.2004.06.016 ↗
16. Comparative study of the effects of microsilica and nanosilica in concrete10.3141/2141-02 ↗
17. Impact of nanosilica size and surface area on concrete properties
18. Hydration studies of cementitious material using silica nanoparticles10.3151/jact.13.345 ↗
19. Mortar and concrete reinforced with nanomaterials10.1007/978-3-642-00980-8_52 ↗
20. Dehydration kinetics of portland cement paste at high temperature10.1007/s10973-012-2303-9 ↗
21. Beneficial role of nanosilica in cement based materials – a review10.1016/j.conbuildmat.2013.05.052 ↗
22. Effect of addition of silica- and amine functionalized silica-nanoparticles on the microstructure of calcium silicate hydrate (C-S-H) gel10.1016/j.jcis.2015.02.066 ↗
23. Effects of nanosilica additions on cement pastes
24. I. Campillo, J.S. Dolado, A. Porro, High-performance nanostructured materials for construction, in: 1st Int. Symp. on Nanotechnol. in Concr., Paisley, Scotland, 2003, pp. 215–225.10.1039/9781847551528-00215 ↗
25. Performance of cement systems with nano-sio2 particles produced by using the sol-gel method10.1557/PROC-1276-21 ↗
26. Strength and microstructure of mortar containing nanosilica at high temperature
27. Effects of nanosilica addition on increased thermal stability of cement-based composite
28. Fire resistance of high-volume fly ash mortars with nanosilica addition10.1016/j.conbuildmat.2012.05.028 ↗
29. A.H. Shah, U.K. Sharma, D.A.B. Roy, P, Bhargava, Spalling behaviour of nano SiO2 high strength concrete at elevated temperatures, in: MATEC Web Conf., 2013, vol. 1009, pp. 1–8.10.1051/matecconf/20130601009 ↗
30. Stress-strain relationship of high-strength concrete in compression10.1061/(ASCE)0899-1561(1996)8:2(70) ↗
31. Effect of temperature on thermal properties of different types of high-strength concrete10.1061/(ASCE)MT.1943-5533.0000225 ↗
32. Studies on optimization of silica nanoparticles dosage in cementitious system10.1016/j.cemconcomp.2016.03.006 ↗
33. Quantification of hydration products in cementitious materials incorporating silica nanoparticles10.1007/s11709-015-0315-9 ↗
34. Abd el aleem · Constr. Build. Mater. · 2014 · 59 · 15110.1016/j.conbuildmat.2014.02.039 ↗