journal article·2017-11

Experimental investigation on the compressive strength and shrinkage of concrete with pre-wetted lightweight aggregates

X.F. Wang, C. Fang, W.Q. Kuang, D.W. Li, N.X. Han, F. Xing

Publisher page

Abstract

Abstract Experimental studies are presented on the influence of three types of pre-wetted lightweight aggregates (PLWA), through their volume fractions and moisture content, on the compressive strength and shrinkage of concrete and expansive concrete. Via integrated thermal analysis, the hydration degree during 7 d–28 d was found to be increased by the internal curing. The use of PLWA increased the shrinkage at 240 d due to the significant increase in the shrinkage deformation during the age of 28 d–90 d caused by internal curing. The results also suggest that incorporation of 10-Mas. % expansive agent is useful to diminish the shrinkage, especially by its combined use with PLWA. Predictive models for the compressive strength and shrinkage of concrete containing PLWA were discussed and a unified model predicting the compressive strength and shrinkage of concrete containing PLWA was suggested.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Properties and Behavior · Concrete and Cement Materials Research · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Combined effect of expansive and shrinkage reducing admixtures to control autogenous shrinkage in self-compacting concrete10.1016/j.conbuildmat.2013.11.033 ↗
2. Influence of cement composition on autogenous deformation and change of the relative humidity
3. Experimental study on early cracking sensitivity of lightweight aggregate concrete10.1016/j.conbuildmat.2016.12.069 ↗
4. Volume change and cracking in internally cured mixtures made with saturated lightweight aggregate under sealed and unsealed conditions10.1016/j.cemconcomp.2009.04.003 ↗
5. Efficiency of lightweight aggregates for internal curing of high strength concrete to eliminate autogenous shrinkage10.1007/BF02482108 ↗
6. Internal curing a 2010 state-of-the-art review
7. Shrinkage of internal cured high strength engineered cementitious composite with pre-wetted sand-like zeolite10.1016/j.conbuildmat.2016.12.182 ↗
8. Water absorption in internally cured mortar made with water-filled lightweight aggregate10.1016/j.cemconres.2009.06.009 ↗
9. Experimental study on strength and durability of lightweight aggregate concrete containing silica fume10.1016/j.conbuildmat.2016.03.165 ↗
10. Detecting solidification using moisture transport from saturated lightweight aggregate
11. Effects of distribution of lightweight aggregates on internal curing of concrete10.1016/j.cemconcomp.2010.07.003 ↗
12. Understanding the shrinkage compensating ability of type K expansive agent in concrete10.1016/j.conbuildmat.2016.04.092 ↗
13. Role of aggregate in the shrinkage of ordinary portland and expansive cement concrete10.1016/0958-9465(91)90006-4 ↗
14. Hydration of mineral shrinkage-compensating admixture for concrete: an experimental and numerical study10.1016/j.conbuildmat.2011.06.070 ↗
15. Expansive admixtures (mainly ettringite)10.1016/S0958-9465(97)00064-4 ↗
16. Prediction of creep, shrinkage, and temperature effects in concrete structures
17. Eurocode 2: design of concrete structures – part 1-1: general rules and rules for buildings
18. GB 175-2007 · 2007
19. GB/T 17431.2-2010 · 2010
20. Estimation of water absorbed by expanding clay aggregates during structural lightweight concrete production10.1617/s11527-012-9857-7 ↗
21. Investigation of blended cement hydration by isothermal calorimetry and thermal analysis10.1016/j.cemconres.2004.10.027 ↗
22. The use of thermal analysis in assessing the effect of temperature on a cement paste10.1016/j.cemconres.2004.06.015 ↗
23. Composition and microstructural changes in an aged cement pastes upon two heating–cooling regimes, as studied by thermal analysis and X-ray diffraction10.1007/s10973-016-5639-8 ↗
24. GB/T 50081-2002 · 2002
25. GB/T 50082-2009 · 2009
26. Evaluation of FLWA and SRAs on autogenous deformation and long-term drying shrinkage of high performance concrete10.1016/j.conbuildmat.2016.05.068 ↗
27. Influence of the artificial lightweight aggregate on fresh properties and compressive strength of the self-compacting mortars10.1016/j.conbuildmat.2016.04.140 ↗
28. Guo · 2013
29. Mitigation strategies for autogenous shrinkage cracking10.1016/S0958-9465(03)00045-3 ↗
30. Influence of cement particle-size distribution on early age autogenous strains and stresses in cement-based materials10.1111/j.1151-2916.2001.tb00619.x ↗
31. Effect of porous lightweight aggregate on strength of concrete10.1016/j.matlet.2003.07.036 ↗
32. A two-phase model for predicting the compressive strength of concrete10.1016/0008-8846(96)00137-8 ↗
33. Approximate strength of lightweight aggregate using micromechanics method10.1016/S1065-7355(98)00002-9 ↗
34. Influence of the volume fraction and the nature of fine lightweight aggregates on the thermal and mechanical properties of structural concrete10.1016/j.conbuildmat.2013.11.019 ↗
35. Long-term behaviour of concrete produced with recycled lightweight expanded clay aggregate concrete10.1016/j.conbuildmat.2014.05.003 ↗
36. The effect of expansive agent and possibility of delayed ettringite formation in shrinkage-compensating massive concrete
37. Neville · 2000
38. Effects of artificial lightweight aggregate on autogenous shrinkage of concrete10.1016/S0008-8846(98)00202-6 ↗
39. Drying shrinkage of fibre-reinforced lightweight aggregate concrete containing fly ash10.1016/S0008-8846(99)00179-9 ↗
40. Ye · 2009
41. Prediction of concrete creep and shrinkage: past, present and future10.1016/S0029-5493(00)00299-5 ↗