Evaluation of pavement performance for reclaimed asphalt materials in different layers
Source abstract
Abstract
Abstract Most of highways with asphalt pavements in China, especially in the developed areas, are facing serious pavement distresses such as rutting at high temperatures, cracking at low temperatures, moisture damage and fatigue cracking. The maintenance and rehabilitation of existing pavements has been the most urgent problem to solve for the transportation department. This paper aims to study the pavement performance of Reclaimed Asphalt Pavements (RAPs) materials in the top and middle layers, compared with the corresponding new asphalt mixtures with or without the same initial gradation as RAP mixtures. Four laboratory tests, including dynamic creep test, semi-circular bending (SCB) test, freeze-thaw indirect tension test and semi-circular fatigue test, were adopted to evaluate the pavement performance of asphalt mixtures. Based on the results of laboratory tests, it was found that high temperature performance of RAP mixtures declined due to the finer gradation, which means the coarse aggregates decreased and fine aggregates increased. The SCB test results showed that RAP mixtures performed worse at low temperatures, and the gradation had little impact while the asphalt binder had a large contribution to the low temperature performance. The moisture stability and fatigue performance of RAP mixtures also declined and the fatigue life had worse susceptibility to stress compared with the new asphalt mixtures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Laboratory performance of warm mix asphalt containing recycled asphalt mixtures10.1016/j.conbuildmat.2014.04.002 ↗
2. Chemical characterization of oil-based asphalt release agents and their emissions10.1016/j.fuel.2005.11.002 ↗
3. Basic Asphalt Recycling Manual, Asphalt Recycling and Reclaiming Association, 2001.
4. McDaniel · 2000
5. McDaniel · 2001
6. Laboratory study of the effect of RAP conditioning on the mechanical properties of hot mix asphalt containing RAP10.1617/s11527-013-0127-0 ↗
7. Hot mix asphalt with high RAP content10.1016/j.proeng.2015.08.009 ↗
8. Green pavements: reuse of plastic waste in asphalt mixtures10.1617/s11527-015-0602-x ↗
9. Microstructural and rheological investigation of asphalt mixtures containing recycled asphalt materials10.1016/j.conbuildmat.2012.04.016 ↗
10. Evaluation of compatibility and mechanical properties of bituminous mixes with warm additives10.1016/j.conbuildmat.2010.11.024 ↗
11. Optimization of warm mix asphalts using different blends of binders and synthetic paraffin wax contents10.1016/j.conbuildmat.2010.02.030 ↗
12. Laboratory performance analysis of high percentage artificial RAP binder with WMA additives10.1016/j.conbuildmat.2017.04.142 ↗
13. Saeed · 2008
14. Mechanistic performance evaluation of pavement sections containing RAP and WMA additives in Manitoba10.1016/j.conbuildmat.2016.12.035 ↗
15. Comparison of laboratory performance of asphalt mixes containing different proportions of RAS and RAP10.1016/j.conbuildmat.2016.07.029 ↗
16. Performance of warm mix recycled asphalt containing up to 100% RAP10.1016/j.conbuildmat.2016.02.108 ↗
17. New specimen for fracture toughness determination for rock and other materials10.1007/BF01157555 ↗
18. Fracture parameters for cracked semi-circular specimen10.1016/j.ijrmms.2003.12.061 ↗