A preliminary study on capsule-based self-healing grouting materials for grouted splice sleeve connection
Source abstract
Abstract
Abstract Grouted splice sleeve connection is a crucial component in modular/prefabricated building structures. However, the reliability (e.g., crack-induced durability issues) of the grouting materials in the splice sleeve connection during their service life is hardly assessed. The external maintenance strategy is usually unimplemented. A capsule-based grouting material was considered in this paper to prolong the service life of the connection through self-healing micro-cracks induced by mechanical force (e.g., seismic and wind load). The influences of capsules on the grouting material in terms of flowing property, compressive strength and porosity were investigated in this paper. The morphological features of the capsule, as well as its status in uncracked and cracked (i.e., failed and triggered) grout matrix, were characterized by scanning electron microscope (SEM). The experimental results revealed that adding no more than 3% capsules into the grouting material can meet the engineering requirements of flowing property (i.e., more than 300 mm in the initial time and more than 260 mm at 30 min) and compressive strength (i.e., over 35, 60 and 85 MPa at 1-day, 3-day and 28-day, respectively). Excessive dosage of capsules added to the grouting materials increased the porosity of the matrix. The pores ranging from 100 nm to 500 nm were significantly influenced due to poor hydration (free water absorbed by the capsule), whereas the relatively large pores (>200 μm) formed weak zones in the matrix. The self-healing effect of the capsule on the splice sleeve connection was assessed by a preliminary pull-out test. It was found that the overall ductility of the connection system could be improved after self-healing for the crack-induced damage of the grouting materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microbial Applications in Construction Materials · Structural Behavior of Reinforced Concrete · Polymer composites and self-healing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Seismic analysis of precast concrete bridge columns connected with grouted splice sleeve connectors10.1061/(ASCE)ST.1943-541X.0001678 ↗
2. Damage assessment through structural identification of a three-story large-scale precast concrete structure10.1002/eqe.2332 ↗
3. Time-dependent behaviour of timber–concrete composite floors with prefabricated concrete slabs10.1016/j.engstruct.2013.03.031 ↗
4. The incorporation of construction and demolition wastes as recycled mixed aggregates in non-structural concrete precast pieces10.1016/j.jclepro.2016.03.137 ↗
5. Geopolymer foam concrete: An emerging material for sustainable construction10.1016/j.conbuildmat.2014.01.081 ↗
6. Mechanical properties of alkali-activated concrete: a state-of-the-art review10.1016/j.conbuildmat.2016.09.121 ↗
7. Optimum mix design of fly ash geopolymer paste and its use in pervious concrete for removal of fecal coliforms and phosphorus in water10.1016/j.conbuildmat.2015.05.034 ↗
8. Phosphate-based geopolymer: Formation mechanism and thermal stability10.1016/j.matlet.2017.01.022 ↗
9. Behaviour of grouted pipe splice under incremental tensile load10.1016/j.conbuildmat.2012.02.001 ↗
10. Feasibility study of grouted splice connector under tensile load10.1016/j.conbuildmat.2013.10.010 ↗
11. Tensile capacity of grouted splice sleeves10.1016/j.engstruct.2015.12.023 ↗
12. A comprehensive review of the study and development of microcapsule based self-resilience systems for concrete structures at Shenzhen university10.3390/ma10010002 ↗
13. Autonomic healing of polymer composites10.1038/35057232 ↗
14. Wax-protected catalyst microspheres for efficient self-healing materials10.1002/adma.200400607 ↗
15. A microcapsule technology based self-healing system for concrete structures10.1142/S1793431113500140 ↗
16. Dicyclopentadiene and sodium silicate microencapsulation for self-healing of concrete10.1061/(ASCE)MT.1943-5533.0000892 ↗
17. Electrochemical impedance study on steel corrosion in the simulated concrete system with a novel self-healing microcapsule10.1016/j.conbuildmat.2014.01.070 ↗
18. Smart releasing behavior of a chemical self-healing microcapsule in the stimulated concrete pore solution10.1016/j.cemconcomp.2014.10.006 ↗
19. Self-immunity microcapsules for corrosion protection of steel bar in reinforced concrete10.1038/srep18484 ↗
20. Feasibility study on corrosion protection of steel bar in a self-immunity system based on increasing OH− content10.1016/j.conbuildmat.2016.08.090 ↗
21. Performance recovery concerning the permeability of concrete by means of a microcapsule based self-healing system10.1016/j.cemconcomp.2016.12.005 ↗
22. Screening of bacteria for self-healing of concrete cracks and optimization of the microbial calcium precipitation process10.1007/s00253-016-7382-2 ↗
23. A binary concrete crack self-healing system containing oxygen-releasing tablet and bacteria and its Ca2+-precipitation performance10.1007/s00253-016-7741-z ↗
24. Self-healing features in cementitious material with urea–formaldehyde/epoxy microcapsules10.1016/j.conbuildmat.2015.12.140 ↗
25. JG/T 408-2013, Chinese Industry Standard. Cementitious grout for coupler of rebar splicing. 2013.
26. The effect of varying volume fraction of microcapsules on fresh, mechanical and self-healing properties of mortars10.1016/j.conbuildmat.2016.06.119 ↗
27. Design of polymeric capsules for self-healing concrete10.1016/j.cemconcomp.2014.09.022 ↗