Recycling asphalt pavement and tire rubber: A full laboratory and field scale study
Source abstract
Abstract
Abstract The present research deals with the influence of fine Crumb Rubber (CR) incorporation on the mechanical and performance characteristics of dense graded asphalt mixtures including 30% Reclaimed Asphalt Pavements (RAP) by means of both laboratory-scale and in situ tests. In the laboratory phase, the mixtures were evaluated in terms of Indirect Tensile Strength (ITS), moisture sensitivity, Indirect Tensile Stiffness Modulus (ITSM) and Repeated Load Axial Test (RLAT). Experimental tests indicated that while the difference of RLAT results were insignificant, the ITS values and the ITSM modulus changed in an effective way. On the other hand, the in-situ investigations on texture by means of sand patch and British pendulum provided testimonies to the effectiveness of CR in recycled dense graded mixtures. Finally, the tire/pavement noise emission measurements of the trial sections by means of Close Proximity (CPX) showed no significant difference between the tested pavements with and without rubber.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. 100% Recycled hot mix asphalt: a review and analysis, resources10.1016/j.resconrec.2014.07.007 ↗
2. Laboratory investigation of moisture damage in rubberized asphalt mixtures containing reclaimed asphalt pavement10.1080/10298430802169432 ↗
3. McDaniel · 2001
4. Influences of crumb rubber size and type on reclaimed asphalt pavement (RAP) mixtures10.1016/j.conbuildmat.2008.05.002 ↗
5. Kutay, evaluation of high RAP – WMA asphalt rubber mixtures10.1080/14680629.2013.812846 ↗
6. A review of crumb rubber modification in dry mixed rubberized asphalt mixtures
7. Study on properties of recycled tire rubber modified asphalt mixtures using dry process10.1016/j.conbuildmat.2006.02.004 ↗
8. Laboratory investigation of the influence of warm asphalt additives on long-term performance properties of CRM binders10.1080/10298430903197225 ↗
9. Municipality of bologna, department of care and quality, Servizio manutentivo del patrimonio stradale comunale, Sector of infrastructure and maintenance, Annex 9, Technical regulations, technical requirements, April (2013)
10. Capitolato speciale d’appalto, parte seconda, Prescrizioni tecniche, Autostrada del Brennero S.P.A, Italy, (2008–2009).
11. Al-Qadi · 2007
12. The use of atomic force microscopy as an important technique to analyze the dispersion of nanometric fillers and morphology in nanocomposites and polymer blends based on elastomers
13. A. Jager, R. Lackner, C. Eisenmenger-Sittner, R. Blab, Identification of Microstructural Components of Bitumen by Means of Atomic Force Microscopy (AFM), Proceedings in Applied Mathematics and Mechanics (PAMM), 2004.10.1002/pamm.200410181 ↗
14. Effect of rejuvenators on performance and microstructure of aged asphalt10.1007/s11595-014-0918-3 ↗
15. Adhesive surface characteristics of bitumen binders investigated by atomic force microscopy10.1016/j.fuel.2013.05.042 ↗
16. Pavement Interactive, Moisture susceptibility, 2011, http://www.pavementinteractive.org/.
17. EN 12697-12, Bituminous mixtures – Test methods for hot mix asphalt – Part 12, Determination of the water sensitivity of bituminous specimens”, European standard, 2003.
18. EN 12697-26, Bituminous mixtures – Test methods for hot mix asphalt, BSI standard publications, 2012.
19. X. Carbonneau, Y. Le Gal, P. Bense, Evaluation of the indirect tensile stiffness modulus test, Sixth International RILEM Symposium on Performance Testing and Evaluation of Bituminous Materials, 200310.1617/2912143772.038 ↗
20. R.S. McDaniel, H. Soleymani, M.R. Anderson, P. Turer, R. Peterson, Recommended use of reclaimed asphalt pavement in the superpave mix design method National Cooperative Highway Research Program, 2000.
21. Material-related aspects of asphalt recycling state of the art10.1061/(ASCE)0899-1561(2006)18:1(81) ↗
22. Review of very high-content reclaimed asphalt use in plant-produced pavements: state of the art
23. EN 12697-25 Bituminous mixtures – Test methods for hot mix asphalt – Part 12 Cyclic compression test 2005 European standard.
24. Fundamental binder and practical mixture evaluation of polymer modified bituminous materials10.1080/10298430412331314146 ↗
25. S.F. Brown, J.M. Gibb, Validation experiments for permanent deformation testing of bituminous mixtures, in: Proceedings of the 1996 Conference of the Association of Asphalt Paving Technologies: Asphalt Paving Technology 1996 ISSN: 02702932.
26. N. Arya Thanaya, Hot asphalt pavement mixtures incorporating all waste materials, Media Teknik Sipil, 2007.
27. D. Woodward, From Vehicle/Surface Interaction to Quiet Surface Dressings, Proceeding of 10th Annual International Conference on Pavement Engineering, Liverpool, UK, 2011.
28. Pavement surface mixture, texture and skid resistance: a factorial analysis, airfield and highway pavements
29. State of California Department of Transportation, Rigid Pavement Preservation 2nd Edition, Maintenance technical advisory guide Caltrans Division of Maintenance, 2008.
30. EN 16036-1, Road and airfield surface characteristics - Test methods – Part 1, Measurement of pavement surface macro texture depth using a volumetric patch technique, European standard, 2001.
31. C. Vincent, J. Korhonen, C. Korhonen, Performance Testing of Hot-Mix Asphalt Aggregates, Special report 99-20, US Army corps of engineers, Cold regions research & engineering laboratory, 1999.
32. TRRL, Instructions for using the portable skid resistance tester, Road note 27, HMSO, 1969.
33. ASTM E303-93, Standard Test Method for Measuring Surface Frictional Properties Using the
34. Study of the road surface properties that control the acoustic performance of a rubberized asphalt mixture
35. Durability and variability of the acoustical performance of rubberized road surfaces10.1016/j.apacoust.2015.02.001 ↗
36. P.R. Donavan, D.M. Lodico, Measuring the tire pavement noise at the source, National Cooperation Highway Research Program, NCHRP report 630, 2009.10.17226/14212 ↗
37. D.I. Hanson, R.S. James, C. NeSmith, Tire/pavement noise Study, National Center for Asphalt Technology, NCAT Report 04-02, 2004.
38. Evaluation of wearing course mix designs on sound absorption improvement of porous asphalt pavement10.1016/j.conbuildmat.2017.03.027 ↗
39. Wullens · 2002
40. Macro-texture influence on vibrational mechanisms of the tyre–road noise of an asphalt rubber pavement10.1080/10298436.2013.790547 ↗