journal article·2018-07

Mechanical properties of pultruded basalt fiber-reinforced polymer tube under axial tension and compression

Lining Ding, Xia Liu, Xin Wang, Hongjiao Huang, Zhishen Wu

Publisher page

Abstract

Abstract This paper explores mechanical properties of pultruded basalt fiber-reinforced polymer (BFRP) tubes for truss structures subjected to tensile and compressive axial loading. The tensile and compressive strength of BFRP tubes were first tested. For the stability under compression, the slenderness ratios varying from 6 to 90 were adopted while the failure modes were recorded. The effects of confinement on the buckling by an additional layer of fiber sheets were investigated. Based on the experimental results, stability equation for predicting compressive strength of slender BFRP tubes were derived and validated. The results show that the tensile strength of short BFRP tube could reach 1011 MPa, while the compressive strength has been around 40% of tensile strength with relatively larger variation. Compared with the single tensile failure mode of BFRP tubes, three types of compressive failure modes, including micro-buckling, local buckling and overall buckling were observed. It can be concluded that a layer of fiber sheet slightly decreases the compressive strength. However, with the increase of slenderness ratios, the positive effect on the compressive strength by fiber sheets becomes significant. The accuracy of the proposed equation was validated by additional five groups of BFRP tubes with different slenderness ratios. It is also shown that the existing prediction equation of GFRP in literature is not suitable for predicting the stability of BFRP.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. A review of the present and future utilization of FRP composites in the civil infrastructure with reference to their important in-service properties10.1016/j.conbuildmat.2010.04.062 ↗
2. A review of fatigue damage modeling in the context of marine FRP laminates10.1016/0951-8339(94)00004-C ↗
3. Proposal for a carbon fiber reinforced composite bridge across the Strait of Gibraltar at its narrowest site10.1243/PIME_PROC_1987_201_048_02 ↗
4. Fiber-reinforced polymer composites for construction—state-of-the-art review10.1061/(ASCE)1090-0268(2002)6:2(73) ↗
5. Integrated high-performance thousand-metre scale cable-stayed bridge with hybrid FRP cables10.1016/j.compositesb.2009.09.001 ↗
6. Evaluation of FRP and hybrid FRP cables for super long-span cable-stayed bridges10.1016/j.compstruct.2010.01.023 ↗
7. Friction Riveting (FricRiveting) as a new joining technique in GFRP lightweight bridge construction10.1016/j.conbuildmat.2015.01.001 ↗
8. G. Sedlacek, M. Oppe, H. Trumpf, Design and testing of an inventive GFRP-truss bridge for 40 t trucks and 30 m span, in: Proceedings of the COBRAE Conference 2005-Bridge Engineering with Polymer Composites, Leusden, 2005.
9. Flexural properties of a lightweight hybrid FRP-aluminum modular space truss bridge system10.1016/j.compstruct.2013.09.058 ↗
10. Development of a light-weight emergency bridge
11. Experimental tests on GFRP truss modules for dismountable bridges10.1016/j.compstruct.2008.06.019 ↗
12. Structural Analysis of GFRP truss bridge model10.1016/j.proeng.2017.02.018 ↗
13. Experimental study on GFRP pipes under axial compression
14. Effect of geometric discontinuities on failure of pultruded GFRP columns in axial compression10.1016/j.compstruct.2015.10.016 ↗
15. Short vs. long column behavior of pultruded glass-fiber reinforced polymer composites10.1016/S0950-0618(01)00018-6 ↗
16. Z.S. Wu, X. Wang, G. Wu, Advancement of Structural Safety and Sustainability with Basalt Fiber Reinforced Polymers Steel creep, in: the sixth International Conference on FRP Composites in Civil Engineering (CICE2012), July 22–24, 2012, Rome, Italy.
17. Characteristics of basalt fiber as a strengthening material for concrete structures10.1016/j.compositesb.2005.02.002 ↗
18. Mechanical and thermal properties of basalt fiber reinforced poly (butylene succinate) composites10.1016/j.matchemphys.2012.01.105 ↗
19. Mechanical characterisation of basalt fibre reinforced plastic10.1016/j.compositesb.2011.01.030 ↗
20. Manufacture of green-composite sandwich structures with basalt fiber and bioepoxy resin
21. Jiangsu GMV New Material T&D Co., Ltd, .
22. ASTM D2105-01(2014). Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass – Fiber – Reinforced Thermosetting-Resin) Pipe and Tube.
23. ASTM D695 – 10(2010). Standard Test Method for Compressive Properties of Rigid Plastics.
24. GB/T 1448-2005 · 2005
25. BS EN 13706-2, Reinforced Plastics Composites-Specifications for Pultruded Profiles, Part 2, European Committee for Standardization, Brussels.
26. Fatigue behavior of basalt fiber-reinforced polymer tendons for prestressing applications10.1061/(ASCE)CC.1943-5614.0000649 ↗
27. Structural evaluation of long boron composite column
28. Buckling of pultruded glass fibre-reinforced channel sections10.1016/0010-4361(78)90520-7 ↗
29. D.J. Lee, P.J. Hewson, The use of fiber-reinforced plastics in thin-walled structures, in: Richards T H, tanley P, eds. Stability Problems in Engineering Structures and Components, New York: Elsevier Applied Science, 1978, pp. 23–55.
30. British Standard, Specification for the use of structural steel in building-Part 2: Metric units, BS 449-2, 1969.
31. European Standard, Eurocode 3: Design of steel structures, Deutsches Institut für Normung, 1993, vol. 3.
32. Shear failure of pultruded fiber-reinforced polymer composites under axial compression10.1061/(ASCE)CC.1943-5614.0000003 ↗
33. Buckling of GFRP column: an empirical approach to design10.1061/(ASCE)1090-0268(2006)10:6(529) ↗
34. A phenomenological design equation for FRP columns with interaction between local and global buckling10.1016/0263-8231(94)90013-2 ↗
35. Influence of modal coupling on the buckling of concentrically loaded pultruded fiber-reinforced plastic columns