journal article·2018-09

Non-uniform corrosion of steel in mortar induced by impressed current method: An experimental and numerical investigation

Chuanqing Fu, Nanguo Jin, Hailong Ye, Jiamin Liu, Xianyu Jin

Publisher page

Abstract

Abstract In this work, a new experimental method was proposed to rapidly induce non-uniform distribution of rust layers around steel bars in mortar and concrete. The proposed method is based on the impressed current method with short testing duration, but capable of inducing morphologies of rust distribution closer to those observed in natural corrosion environments than other existing methods. X-ray microtomography with image analysis techniques was implemented to quantify the rust formation and propagation in the proposed setups. A finite element model to systematically and semi-quantitatively investigate several experimental parameters (e.g., the distance between anode and cathode, the anode-to-cathode area ratio) was established and verified by a series of independent experimental programs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Infrastructure Maintenance and Monitoring

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Broomfield · 2002
2. Chloride threshold values to depassivate reinforcing bars embedded in a standardized OPC mortar10.1016/S0008-8846(00)00265-9 ↗
3. The presentation of the chloride threshold level for corrosion of steel in concrete10.1016/S0010-938X(97)00009-7 ↗
4. Predicting the service life of concrete
5. Effect of reinforcement corrosion on bond strength10.1016/0950-0618(95)00077-1 ↗
6. Influence of cracking on chloride diffusivity and moisture influential depth in concrete subjected to simulated environmental conditions10.1016/j.conbuildmat.2013.04.024 ↗
7. Influence of flexural loading on chloride ingress in concrete subjected to cyclic drying-wetting condition10.12989/cac.2015.15.2.183 ↗
8. Chloride penetration in concrete exposed to cyclic drying-wetting and carbonation10.1016/j.conbuildmat.2016.02.194 ↗
9. Corrosion products of reinforcing bars embedded in concrete10.1016/0010-938X(93)90382-Q ↗
10. Corrosion initiation time of steel reinforcement in a chloride environment—a one dimensional solution10.1016/S0010-938X(96)00163-1 ↗
11. Corrosion of reinforcing steel in simulated concrete pore solutions: effect of carbonation and chloride content10.1016/j.corsci.2004.03.013 ↗
12. Modelling of interaction between corrosion-induced concrete cover crack and steel corrosion rate10.1016/j.corsci.2012.11.028 ↗
13. Corrosion characteristics of a 4-year naturally corroded reinforced concrete beam with load-induced transverse cracks10.1016/j.corsci.2017.01.002 ↗
14. Chloride ingress profiles and binding capacity of mortar in cyclic drying-wetting salt fog environments10.1016/j.conbuildmat.2016.10.059 ↗
15. Model of chloride penetration into cracked concrete subject to drying–wetting cycles10.1016/j.conbuildmat.2012.05.027 ↗
16. Cover cracking of reinforced concrete due to rebar corrosion induced by chloride penetration10.1016/j.cemconres.2011.04.008 ↗
17. Investigation on the cracking behavior of concrete cover induced by corner located rebar corrosion10.1016/j.engfailanal.2015.03.019 ↗
18. Effects of non-uniform corrosion on the cracking and service life of reinforced concrete structures10.1016/j.cemconres.2010.03.018 ↗
19. Finite element modeling of concrete cover cracking due to non-uniform steel corrosion10.1016/j.engfracmech.2014.12.011 ↗
20. Predicting the service life of concrete marine structures: an environmental methodology
21. Comparison of uniform and non-uniform corrosion induced damage in reinforced concrete based on a Gaussian description of the corrosion layer10.1016/j.corsci.2011.05.017 ↗
22. Crack shape and rust distribution in corrosion-induced cracking concrete10.1016/j.corsci.2011.11.002 ↗
23. Mechanistic model and numerical analysis for corrosion damage of reinforced concrete structure10.1023/B:frac.0000025297.39653.59 ↗
24. Comparison of two accelerated corrosion techniques for concrete structures
25. Modeling corroded section configuration of steel bar in concrete structure10.1016/j.conbuildmat.2008.09.026 ↗
26. Non-uniform rust expansion for chloride-induced pitting corrosion in RC structures10.1016/j.conbuildmat.2013.10.042 ↗
27. Modeling of time to corrosion-induced cover cracking in reinforced concrete structures10.1016/j.cemconres.2005.06.007 ↗
28. A model for prediction of time from corrosion initiation to corrosion cracking10.1016/j.cemconcomp.2006.11.004 ↗
29. Reinforcement corrosion-induced cover cracking and its time prediction for reinforced concrete structures10.1016/j.corsci.2010.12.026 ↗
30. Non-uniform time-to-corrosion initiation in steel reinforced concrete under chloride environment10.1016/j.corsci.2014.01.023 ↗
31. Time-dependent probability assessment for chloride induced corrosion of RC structures using the third-moment method10.1016/j.conbuildmat.2014.10.039 ↗
32. Modeling of concrete cracking due to corrosion process of reinforcement bars10.1016/j.cemconres.2015.01.010 ↗
33. Factors controlling cracking of concrete affected by reinforcement corrosion10.1007/BF02480466 ↗
34. Analyzing crack width to predict corrosion in reinforced concrete10.1016/S0008-8846(03)00246-1 ↗
35. Calculation of corrosion rate for reinforced concrete beams based on corrosive crack width10.1631/jzus.A1300280 ↗
36. Prediction of reinforcement corrosion using corrosion induced cracks width in corroded reinforced concrete beams10.1016/j.cemconres.2013.11.006 ↗
37. Critical thickness of rust layer at inner and out surface cracking of concrete cover in reinforced concrete structures10.1016/j.corsci.2012.03.018 ↗
38. Critical corrosion amount to cause cracking of reinforced concrete structures
39. Corrosion damage diagnosis of a reinforced concrete beam after 40 years natural exposure in marine environment10.1016/j.cemconres.2005.11.004 ↗
40. Concrete cover cracking with reinforcement corrosion of RC beam during chloride-induced corrosion process10.1016/j.cemconres.2009.09.026 ↗
41. Performance of reinforced concrete beams corroded under sustained service loads: a comparative study of two accelerated corrosion techniques10.1016/j.conbuildmat.2017.10.108 ↗
42. Effectiveness of impressed current technique to simulate corrosion of steel reinforcement in concrete10.1061/(ASCE)0899-1561(2003)15:1(41) ↗
43. Interaction between corrosion crack width and steel loss in RC beams corroded under load10.1016/j.cemconres.2010.03.010 ↗
44. Steel corrosion on RC structures under sustained service loads—a critical review10.1016/j.engstruct.2009.07.016 ↗
45. Modeling the cracking of cover concrete due to non-uniform corrosion of reinforcement10.1016/j.corsci.2014.08.025 ↗
46. Crack patterns of concrete with a single rebar subjected to non-uniform and localized corrosion10.1016/j.conbuildmat.2016.04.149 ↗
47. Modeling the time-to corrosion cracking of the cover concrete in chloride contaminated reinforced concrete structures
48. Rust distribution and corrosion-induced cracking patterns of corner-located rebar in concrete cover10.1016/j.conbuildmat.2017.09.033 ↗
49. Revie · 2008
50. Application of Butler-Volmer equations in the modelling of activation polarization for PEM fuel cells10.1016/j.jpowsour.2006.05.026 ↗
51. Tables of standard electrode potentials10.1149/1.2131790 ↗