Behavior of high performance concrete pastes with different mineral admixtures in simulated seawater environment
Source abstract
Abstract
Abstract With the blooming of ocean construction engineering, the influence of seawater on concrete durability draws increasing attentions. This paper investigates the performances of five high performance concrete (HPC) pastes, including pure cement paste, fly ash (FA) paste, limestone powder (LP) paste, ground granulated blast-furnace slag (GGBS) paste and silica fume (SF) paste, soaked in simulated seawater. The results indicate that the addition of FA would improve the strength of paste soaked in simulated seawater compared to pure cement paste from 90 d to 360 d and the order of strength in 360 d was, FA paste > Pure cement paste > LP paste > GGBS paste > SF paste. All mineral admixtures except LP can inhibit the expansion of paste soaked in simulated seawater at later age and the order of expansion rate in 360 d was, LP paste > Pure cement paste > FA paste > GGBS paste > SF paste. The internal structure of pastes soaked in simulated seawater at 360 d mainly contains Ca(OH)2, AFt, gypsum, Mg(OH)2, C3S and C2S while the external structure of pastes mainly contains Mg(OH)2, CaCO3 and AFt through the XRD spectra. SEM results proved that the addition of mineral admixtures can make the structure of the pastes denser.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Durability of marine concrete structures – field investigations and modelling
2. Historic congressional study: corrosion costs and preventive strategies in the United States
3. Life-cycle cost analysis of reinforced concrete structures in marine environments10.1016/S0167-4730(03)00014-6 ↗
4. Durability of concrete in marine environment – a review
5. Performance of ground blast furnace slag and ground basaltic pumice concrete against seawater attack10.1016/j.conbuildmat.2007.03.024 ↗
6. Concrete random damage prediction model under seawater chemical erosion environment10.4028/www.scientific.net/AMM.90-93.857 ↗
7. Effect of baltic seawater and binder type on frost durability of concrete10.1061/(ASCE)MT.1943-5533.0000803 ↗
8. Arabian journal for science and engineering
9. A probabilistic investigation into deterioration of CFRP–concrete interface in aggressive environments10.1016/j.conbuildmat.2012.11.101 ↗
10. Durability design of reinforced concrete structures: a comparison of the use of durability indexes in the deemed-to-satisfy approach and the full-probabilistic approach10.1617/s11527-012-9829-y ↗
11. Behaviour of concrete affected by sea-water under high pressure10.1007/BF02472865 ↗
12. Innovation and application of the modern concrete technology in construction engineering
13. Effect of chemical structure of polycarboxylate-based superplasticizers on workability retention of self-compacting concrete10.1016/j.conbuildmat.2007.07.005 ↗
14. Evaluation of concrete structures in marine environment: geiger key bridge
15. R.E. Melchers, T.M. Pape, I. Chaves, The long-term durability of reinforced concrete structures exposed to aggressive marine environments, International Conference on Infrastructure Failures and Consequences, 2014.
16. Sulfate resistances of different types of Turkish Portland cements by selecting the appropriate test methods10.1016/j.conbuildmat.2005.01.048 ↗
17. Study of deterioration mechanism of concrete in multi-aggressive and freeze-thaw environment
18. Effects of limestone replacement ratio on the sulfate resistance of Portland limestone cement mortars exposed to extraordinary high sulfate concentrations10.1016/j.conbuildmat.2009.02.039 ↗
19. Corrosion behavior of F30S30 concrete under wet-dry cycles in simulated seawater with magnesium salt and sulfate10.4028/www.scientific.net/AMR.936.1366 ↗
20. Accelerated testing of plain epoxy-coated reinforcement in simulated seawater chloride solutions10.1016/S0008-8846(01)00487-2 ↗
21. Utilization of fly ash concrete in marine environment for long term design life analysis10.1016/j.matdes.2009.09.024 ↗
22. Influence of slag on sulfate resistance of concrete
23. Shrinkage cracking of high-strength concrete
24. Strength behavior of concrete using slag with cement in sea water environment
25. Sulfate resistance of limestone cement concrete exposed to combined chloride and sulfate environment at low temperature10.1016/j.cemconcomp.2012.05.006 ↗
26. Effect of limestone powder on the sulfate-resistance of materials based on cement and its mechanism
27. Durability of the hydrated limestone-silica fume Portland cement mortars under sulphate attack10.1016/S0008-8846(99)00049-6 ↗
28. Experimental study on the influences of deffctive concrete on chloridion penetration resistance10.4028/www.scientific.net/AMR.368-373.1165 ↗
29. Research on corrosion of reinforced concrete structures by Chloridion in port engineering construction10.4028/www.scientific.net/AMM.90-93.2483 ↗
30. Erosion against concrete structure caused by chloridion and safeguard procedures
31. Preparation and application of fine-grinded cement in cement-based material10.1016/j.conbuildmat.2017.09.023 ↗
32. Durability and strength evaluation of high-performance concrete in marine structures10.1016/j.conbuildmat.2010.01.013 ↗
33. Research on effects of mineral admixture and water to binder ratio on durability of concrete
34. Experience study on impact of strength and durability of compound admixture system of low water-binder ratio concrete
35. Durability indices for concretes with different dosages of mineral admixtures
36. Test method for strength of cement mortar, Industrial building (3) (1979) 57-61. (In Chinese).
37. Research on the dry shrinkage test method of cement mortar
38. Effect of nonpozzolanic and pozzolanic mineral admixtures on the hydration behavior of ordinary Portland cement10.1016/j.conbuildmat.2011.08.006 ↗
39. Behavior of mortar exposed to different exposure conditions of sulfate attack10.1016/j.oceaneng.2018.03.017 ↗
40. Strength and corrosion properties of Portland cement mortar and concrete with mineral admixtures10.1016/j.conbuildmat.2011.03.011 ↗
41. Is magnesia cement low carbon? Life cycle carbon footprint comparing with Portland cement10.1016/j.jclepro.2016.05.082 ↗