Response of UHPFRC and HDFRC under static and high-velocity projectile impact loads
Source abstract
Abstract
Abstract This paper presents an experimental investigation of the mechanical properties of ultra-high-performance fiber-reinforced concrete (UHPFRC) and high-ductile fiber-reinforced composite (HDFRC) under a static load and of the impact resistance capacity of both materials under a high-velocity projectile impact load. Two types of materials, i.e., strength-oriented UHPFRC and ductility-oriented alkali-activated slag-based HDFRC, were designed and prepared. A series of experiments, including a compressive strength test, a uniaxial tension test, and high-velocity projectile impact test, were conducted to characterize the properties of the materials. From the test results, it was found that the UHPFRC mixture with a compressive strength of 155 MPa and a tensile strain capacity of 1.04% has toughness under a static tensile load similar to that of the HDFRC mixture with a compressive strength of 32.9 MPa and a tensile strain capacity of 7.9%. Although the UHPFRC mixture has a slightly higher resistance capacity to high-velocity projectile impact loads in terms of the failure mode, mass loss, crater area, and penetration depth compared to the HDFRC mixture, both materials showed higher impact resistance capacities than that predicted by the empirical model.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Innovative concrete reinforcement materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Association Française de Génie Civil · 2002
2. Russell · 2013
3. Hybrid effects of steel fiber and microfiber on the tensile behavior of ultra-high performance concrete10.1016/j.compstruct.2016.02.075 ↗
4. Control of tensile behavior of ultra-high performance concrete through artificial flaws and fiber hybridization10.1007/s40069-016-0155-6 ↗
5. Tensile behavior of ultra high performance hybrid fiber reinforced concrete10.1016/j.cemconcomp.2011.09.009 ↗
6. Ultra high performance concretes
7. Tailoring ECC for special attributes: a review10.1007/s40069-012-0018-8 ↗
8. Flexural/tensile-strength ratio in engineered cementitious composites10.1061/(ASCE)0899-1561(1994)6:4(513) ↗
9. Recommendations for design and construction of high performance fiber reinforced cement composites with multiple fine cracks (HPFRCC)
10. Tensile strain-hardening behavior of polyvinyl alcohol engineered cementitious composite (PVA-ECC)
11. Ultra-high-ductile behavior of a polyethylene fiber-reinforced alkali-activated slag-based composite10.1016/j.cemconcomp.2016.04.002 ↗
12. Composite properties of high-strength polyethylene fiber-reinforced cement and cementless composites10.1016/j.compstruct.2015.11.046 ↗
13. Rheological and mechanical properties of fiber-reinforced alkali-activated composite10.1016/j.conbuildmat.2015.07.182 ↗
14. Strain hardening fiber reinforced alkali-activated mortar – a feasibility study10.1016/j.conbuildmat.2012.06.007 ↗
15. Tensile strain hardening behavior of PVA fiber-reinforced engineered geopolymer composite10.1061/(ASCE)MT.1943-5533.0001242 ↗
16. A feasibility study of strain hardening fiber reinforced fly ash-based geopolymer composites10.1016/j.conbuildmat.2014.02.005 ↗
17. Impact response of ultra-high-strength fiber-reinforced cement composite
18. Response of ultra-high performance fiber reinforced concrete (UHPFRC) to impact and static loading10.1016/j.cemconcomp.2008.09.001 ↗
19. Mix design of UHPFRC and its response to projectile impact10.1016/j.ijimpeng.2013.08.003 ↗
20. Resistance of slim UHPFRC targets to projectile impact using in-service bullets10.1016/j.ijimpeng.2014.10.002 ↗
21. Static properties and impact resistance of a green Ultra-High Performance Hybrid Fibre Reinforced Concrete (UHPHFRC): experiments and modeling10.1016/j.conbuildmat.2014.06.033 ↗
22. Impact resistance of a sustainable Ultra-High Performance Fibre Reinforced Concrete (UHPFRC) under pendulum impact loadings10.1016/j.conbuildmat.2015.12.157 ↗
23. Zhang · 2008
24. Mechanical and structural behaviors of ultra-high-performance fiber-reinforced concrete subjected to impact and blast10.1016/j.conbuildmat.2017.05.136 ↗
25. Behavior of hybrid-fiber engineered cementitious composites subjected to dynamic tensile loading and projectile impact10.1061/(ASCE)0899-1561(2005)17:2(143) ↗
26. ASTM · 2007
27. A threshold selection method from gray-level histograms
28. A review of procedures for the analysis and design of concrete structures to resist missile impact effects10.1016/0029-5493(76)90015-7 ↗
29. Review on empirical studies of local impact effects of hard missile on concrete structures
30. Composite properties of high-strength, high-ductility concrete
31. Tensile behavior and cracking pattern of an ultra-high performance mortar reinforced by polyethylene fiber10.1155/2017/5383982 ↗
32. Practical design criteria for saturated pseudo strain hardening behavior in ECC10.3151/jact.4.59 ↗
33. Local impact effects of hard missiles on concrete targets10.1016/j.ijimpeng.2005.04.005 ↗
34. Critical impact energies for scabbing and perforation of concrete target10.1016/j.nucengdes.2005.10.017 ↗
35. Perforation thickness and ballistic limit of concrete target subjected to rigid projectile impact10.1061/(ASCE)0733-9399(2003)129:9(1083) ↗
36. Assessment of flexural toughness and impact resistance of bundle-type polyamide fiber-reinforced concrete10.1016/j.compositesb.2015.04.011 ↗
37. Static mechanical properties and impact resistance of amorphous metallic fiber-reinforced concrete10.1016/j.compstruct.2015.08.128 ↗
38. Damage evaluation of concrete plates by high-velocity impact10.1016/j.ijimpeng.2008.07.021 ↗
39. Hazell · 2015