Influence of binder content on temperature and internal strain evolution of early age cemented tailings backfill
Source abstract
Abstract
Abstract The philosophy of the use of backfill is to return much of tailings waste to underground voids and increase working place stability to safely extract more minerals. The key issue for the safe and efficient design of cemented tailings backfill (CTB) structure is its mechanical properties and interaction with the surrounding rock. As a cemented material, CTB’s strength is a function of hydration degree. As hydration is an exothermic reaction and results in net volume reduction, thermal expansion and chemical shrinkage occur simultaneously in the mixture. Each CTB component plays a significant role during this process and the most important factor is the binder content, because it influences the amount of cement hydration products that provide binding phases between tailing particles. In this paper, a number of fiber Bragg gratings (FBGs) were directly embedded into the 7-day cured CTB specimens to measure their temperature and internal strain evolution, with settlement development measured by Linear Variable Differential Transformer (LVDT). The experimental results showed that binder content had a significant effect on CTB temperature and internal strain evolution. Furthermore, the evolution of internal strain and settlement was an indicator of the transformation in different stages (such as fluid, skeleton formation and hardening) during the hydration process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tailings Management and Properties · Rock Mechanics and Modeling · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. A contribution to understanding the hardening process of cemented pastefill10.1016/j.mineng.2003.10.022 ↗
2. Design of backfilled thin-seam coal pillars using earth pressure theory10.1023/B:GEGE.0000047047.65476.c6 ↗
3. Long-term stability of a backfilled room-and-pillar test section at the Buick Mine, Missouri, USA10.1016/j.ijrmms.2008.11.010 ↗
4. Influence of backfill on coal pillar strength and floor bearing capacity in weak floor conditions in the Illinois Basin10.1016/j.ijrmms.2014.11.011 ↗
5. Mechanical Behaviour of the Interface Between Cemented Tailings Backfill and Retaining Structures Under Shear Loads10.1007/s10706-010-9338-0 ↗
6. Modeling of pressure on retaining structures for underground fill mass10.1016/j.tust.2017.06.010 ↗
7. Specimen size effect on strength behavior of cemented paste backfills subjected to different placement conditions10.1016/j.enggeo.2014.11.015 ↗
8. Experimental investigation on the strength characteristics of cement paste backfill in a similar stope model and its mechanism10.1016/j.conbuildmat.2017.07.142 ↗
9. Modeling the effect of sulphate on strength development of paste backfill and binder mixture optimization10.1016/j.cemconres.2004.05.020 ↗
10. Design and application of underground mine paste backfill technology10.1007/s10706-007-9167-y ↗
11. Coupled effects of sulphate and temperature on the strength development of cemented tailings backfills: Portland cement-paste backfill10.1016/j.cemconcomp.2010.08.002 ↗
12. A contribution to understanding the effects of curing temperature on the mechanical properties of mine cemented tailings backfill10.1016/j.enggeo.2010.05.016 ↗
13. Experimental characterization of the influence of tailings fineness and density on the quality of cemented paste backfill10.1016/j.mineng.2004.05.012 ↗
14. Effect of properties of tailings and binder on the short-and long-term strength and stability of cemented paste backfill10.1016/j.matlet.2005.06.042 ↗
15. Coupling binder hydration, temperature and compressive strength development of underground cemented paste backfill at early ages10.1016/j.tust.2009.07.008 ↗
16. A review of binders used in cemented paste tailings for underground and surface disposal practices10.1016/j.jenvman.2013.09.039 ↗
17. Underground mining with backfill
18. Contribution of mixture design to chemical and autogenous shrinkage of concrete at early ages10.1016/j.cemconres.2004.05.009 ↗
19. Coupled chemical shrinkage and consolidation: some benchmark solutions10.1007/s11242-014-0372-x ↗
20. Assessment of the self-desiccation process in cemented mine backfills10.1139/T07-051 ↗
21. Coupled behavior of cemented paste backfill at early ages10.1007/s10706-015-9892-6 ↗
22. Coupled thermo-hydro-mechanical–chemical behaviour of cemented paste backfill in column experiments: Part II: mechanical, chemical and microstructural processes and characteristics10.1016/j.enggeo.2013.12.004 ↗
23. Mechanical and thermal properties of cemented tailings materials at early ages: influence of initial temperature, curing stress and drainage conditions10.1016/j.conbuildmat.2016.08.080 ↗
24. Sulphate effect on the early age strength and self-desiccation of cemented paste backfill10.1016/j.conbuildmat.2015.12.124 ↗
25. Influence of cement and admixture on autogenous shrinkage of cement paste10.1016/0008-8846(95)00010-0 ↗
26. Effects of shrinkage-reducing admixtures on restrained shrinkage cracking of concrete
27. Experimental studies on shrinkage of high-performance concrete10.1016/S0008-8846(98)00068-4 ↗
28. Strength and ultrasonic properties of cemented paste backfill10.1016/j.ultras.2013.04.013 ↗
29. Measurement of volume change in cemented mine backfills at early ages
30. Early hydration of portland cement — effects of water/cement ratio10.1016/0008-8846(83)90007-8 ↗
31. Cracking risks associated with early age shrinkage10.1016/S0958-9465(03)00068-4 ↗
32. Freezing behaviour of cemented paste backfill material in column experiments10.1016/j.conbuildmat.2017.05.002 ↗
33. Thermo-hydro-mechanical behaviour of sodium silicate-cemented paste tailings in column experiments10.1016/j.tust.2012.01.004 ↗
34. Reaction mechanisms of concrete admixtures10.1016/0008-8846(90)90053-Z ↗
35. Simultaneous measurement of shrinkage and temperature of reactive powder concrete at early-age using fibre Bragg grating sensors10.1016/j.cemconcomp.2007.02.003 ↗
36. Early-age autogenous shrinkage of high-performance concrete columns by embedded fiber bragg-grating sensor10.4028/www.scientific.net/KEM.419-420.1 ↗
37. Early-age shrinkage and temperature optimization for cement paste by using PCM and MgO based on FBG sensing technique10.1016/j.conbuildmat.2016.04.104 ↗
38. Cementitious backfill with high sulfur content – Physical, chemical, and mineralogical characterization10.1016/S0008-8846(99)00023-X ↗
39. International, A., Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System). Astm, 2006
40. Effects of settlement and drainage on strength development within mine paste backfill
41. Measurement of temperature and early age shrinkage of alkali activated metakaolin using fiber Bragg grating sensors
42. Mindess · 2003
43. Properties of concrete
44. Coupled thermo-hydro-mechanical–chemical behaviour of cemented paste backfill in column experiments. Part I: physical, hydraulic and thermal processes and characteristics10.1016/j.enggeo.2013.01.015 ↗
45. Initial temperature-dependence of strength development and self-desiccation in cemented paste backfill that contains sodium silicate10.1016/j.cemconcomp.2016.01.005 ↗
46. Modeling the thermal response of hydrating cemented gangue backfill with admixture of fly ash10.1016/j.tca.2015.11.007 ↗
47. In situ measurements of cemented paste backfill at the Cayeli Mine10.1139/t2012-040 ↗
48. Characterization of self-weight consolidated paste backfill10.36487/ACG_repo/663_29 ↗
49. Effects of curing and stress conditions on hydromechanical, geotechnical and geochemical properties of cemented paste backfill10.1016/j.enggeo.2013.10.024 ↗
50. Backfill in underground mining
51. A weighing method for cement hydration
52. The influence of cement characteristics on chemical shrinkage