Effect of a nanoscale viscosity modifier on rheological properties of cement pastes and mechanical properties of mortars
Source abstract
Abstract
Abstract The effect of a nanoscale viscosity modifier (called NP) on rheological properties of cement pastes and mechanical properties of mortars was experimentally studied. The morphology of NP agglomerates and its dispersed status was investigated by SEM. With different NP contents, the yield stress, plastic viscosity and thixotropy of pastes and the flexural strength and compressive strength of mortars were investigated and compared with plain cement paste and mortar at different water-to-cement ratios. The results illustrate that the incorporation of NP can increase plastic viscosity and yield stress of cement paste significantly. Its thixotropy varies simultaneously as well. The mechanical properties of mortars can be improved when the NP content is less than 1.0%. The reticulate structure formed by nanoscale rod-like NP particles with huge surface area in paste flocculates some water to modify the rheological properties of cement paste.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Modification of water retention and rheological properties of fresh state cement-based mortars by guar gum derivatives10.1016/j.conbuildmat.2016.06.125 ↗
2. Properties of fresh and hardened concrete10.1016/j.cemconres.2011.03.009 ↗
3. Influence of viscosity modifying admixtures on the rheological behavior of cement and mortar pastes10.1007/s13367-012-0004-3 ↗
4. Performance of new viscosity modifying admixtures in enhancing the rheological properties of cement paste10.1016/S0008-8846(03)00233-3 ↗
5. Non-dispersible underwater concrete using polymers—the production, performance and potential of polymers in concrete
6. Coupled effect of viscosity enhancing admixtures and superplasticizers on rheological behavior of cement paste10.1007/s11771-017-3626-2 ↗
7. Rheological properties of grouts with viscosity modifying agents as diutan gum and welan gum incorporating pulverised fly ash10.1016/j.cemconres.2006.05.016 ↗
8. Properties comparison of mortars with welan gum or cellulose ether10.1016/j.conbuildmat.2015.10.116 ↗
9. Utilization of polysaccharides as viscosity modifying agent in self-compacting concrete10.1016/j.conbuildmat.2014.09.017 ↗
10. Cellulose ethers influence on water retention and consistency in cement-based mortars10.1016/j.cemconres.2010.09.004 ↗
11. Rheological properties of cementitious materials containing mineral admixtures10.1016/j.cemconres.2004.11.002 ↗
12. The influence of mineral admixtures on the rheology of cement paste and concrete10.1016/S0008-8846(00)00454-3 ↗
13. Hybrid effect of carbon nanotube and nano-clay on physico-mechanical properties of cement mortar10.1016/j.conbuildmat.2010.06.046 ↗
14. Effects of nano-SiO2 on the permeability-related properties of cement-based composites with different water/cement ratios10.1007/s10853-017-1906-8 ↗
15. Transparent strain sensors through randomly self-assembly of single walled carbon nanotubes at the air/water interface10.1166/jnn.2017.13308 ↗
16. Carbon nanotube-cement composite for self-sensing concrete pavement10.1002/bate.201400077 ↗
17. Nanotechnology in concrete–a review10.1016/j.conbuildmat.2010.03.014 ↗
18. Microstructure of cement mortar with nano-particles10.1016/S1359-8368(03)00052-0 ↗
19. Improved tensile properties of carbon nanotube modified epoxy and its continuous carbon fiber reinforced composites10.1002/pc.23076 ↗
20. Effect of graphite nanoplatelets and carbon nanofibers on rheology, hydration, shrinkage, mechanical properties, and microstructure of UHPC10.1016/j.cemconres.2018.01.001 ↗
21. Effect of nano-silica on rheology and fresh properties of cement pastes and mortars10.1016/j.conbuildmat.2009.02.005 ↗
22. Effect of nano-SiO2 and nano-TiO2 addition on the rheological behavior and the hardened properties of cement mortars10.1016/j.msea.2011.10.102 ↗
23. Rheological and fresh properties of reduced fine content self-compacting concretes produced with different particle sizes of nano SiO210.1016/j.conbuildmat.2017.03.098 ↗
24. Characteristics of cement mortar with nano-SiO2 particles10.1016/j.conbuildmat.2005.12.020 ↗
25. A synopsis about the effect of nano-Al2O3, nano-Fe2O3, nano-Fe3O4 and nano-clay on some properties of cementitious materials–A short guide for Civil Engineer10.1016/j.matdes.2013.05.035 ↗
26. Influence of clays on the rheology of cement pastes10.1016/j.cemconres.2009.11.001 ↗
27. Performance-based study on the rheological and hardened properties of blended cement mortars incorporating palygorskite clays and carbon nanotubes10.1016/j.conbuildmat.2018.03.121 ↗
28. Fresh properties of a novel 3D printing concrete ink10.1016/j.conbuildmat.2018.04.115 ↗
29. Electrochemical properties of Na–attapulgite10.1006/jcis.1996.0196 ↗
30. Experimental and modeling study on the non-linear structural build-up of fresh cement pastes incorporating viscosity modifying admixtures10.1016/j.cemconres.2018.02.022 ↗
31. Influence of nano-sized highly purified magnesium alumino silicate clay on thixotropic behavior of fresh cement pastes10.1016/j.conbuildmat.2014.07.050 ↗
32. Study of the mechanisms underlying the fresh-state response of cementitious materials modified with nanoclays10.1016/j.conbuildmat.2012.06.057 ↗
33. Influence of purified attapulgite clays on the adhesive properties of cement pastes as measured by the tack test10.1016/j.cemconcomp.2014.01.005 ↗
34. EN 197-1. Cement – Part 1: Composition, specifications and conformity criteria for common cements; 2011.
35. EN 196-1. Methods of testing cements – Part 1: Determination of strength; 2005.
36. Avoiding inaccurate interpretations of rheological measurements for cement-based materials10.1016/j.cemconres.2015.05.003 ↗