Physico-mechanical characterization of heat-treated glued laminated bamboo
Source abstract
Abstract
Abstract The objective of this study was to evaluate the effect of temperature on reducing the mass of giant bamboo (Dendrocalamus giganteus Munro) and on the physico-mechanical characteristics of glued laminated bamboo (glulam) as a function of the adhesives used. Stalks with an approximate age of three years were collected and divided into four sections longitudinally, which were immersed in water for 10 days and air-dried. The sections were transformed into laminas and heat-treated for one hour at 100, 140, 160, 180 and 200 °C. The adhesives used were based on resorcinol–formaldehyde (RF), urea–formaldehyde (UF) and polyvinyl acetate cross-linked (PVAc). The heat-treated panels were sized according to each test performed. There was a reduction in the mass of the lamina subjected to the highest heat modification temperatures. Beginning at 160 °C, there was an increase in the dimensional stability of the heat-treated bamboo glulam (HTGLB) with RF; however, there was a decrease in the material mechanical strength values. The temperature of 160 °C produced the best HTGLB characteristics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bamboo properties and applications · Natural Fiber Reinforced Composites · Wood Treatment and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. American Society for Testing and Materials. ASTM D – 5266, Standard practice for estimating the percentage of wood failure in adhesive bonded joints, Annual Book of ASTM Standards, West Conshohocken, 2005.
2. American Society for Testing and Materials. ASTM D – 2559, Standard specification for adhesives for bonded structural wood products for use under exterior exposure conditions, Annual Book of ASTM Standards, West Conshohocken, 2012.
3. American Society for Testing and Materials. ASTM D – 5751, Standard specification for adhesives used for laminate joints in non-structural lumber products, Annual Book of ASTM Standards, West Conshohocken, 2012.
4. American Society for Testing and Materials ASTM D – 143 2008 Standard test methods for small clear specimens of timber Annual Book of ASTM Standards, West Conshohocken.
5. Beraldo · 2004
6. Bambu laminado colado
7. Densidade básica e retratibilidade da madeira de Eucalyptus grandis submetida a diferentes temperaturas de termorretificação
8. Behavior of the brown-rot fungus Gloeophyllum trabeum on thermally-modified Eucalyptus grandis wood
9. Decay resistance of thermally-modified Eucalyptus grandis wood at 140 °C, 160 °C, 180 °C, 200 °C and 220 °C10.1016/j.biortech.2010.06.119 ↗
10. Use of wood elemental composition to predict heat treatment intensity and decay resistance of different softwood and hardwood species10.1016/j.polymdegradstab.2010.09.010 ↗
11. Effects of thermal treatment on the physicochemical characteristics of giant bamboo10.1590/S0104-77602011000300010 ↗
12. Propriedades físicas e colorimétricas da madeira termorretificada de Pinus elliottii var. elliottii
13. Properties after weathering and decay resistance of a thermally modified wood structural board10.1016/j.ibiod.2007.11.010 ↗
14. Estimativa de propriedades de resistência e rigidez da madeira através da densidade aparente
15. Pine wood modification by heat treatment in air
16. Wood modification by heat treatment: a review
17. Optimum bamboo kraft cooking – the influence of the cooking conditions on the pulp and fibre properties
18. Hill · 2006
19. Bambu laminado colado (BLC)
20. Variabilidade temporal da precipitação mensal em Alegre – ES
21. Nomenclature for engineered bamboo10.15376/biores.11.1.1141-1161 ↗
22. Hygroscopicity of wood from Eucalyptus grandis and Pinus taeda subjected to thermal treatment10.1590/S0104-77602013000100003 ↗
23. Efeito da termorretificação sobre as propriedades colorimétricas das madeiras de Eucalyptus grandis e Pinus caribaea var. hondurensis
24. Caracterização físico-mecânica do laminado colado de bambu (Dendrocalamus giganteus)
25. Caracterização e aspecto de um piso confeccionado com bambu (Dendrocalamus giganteus Munro)
26. Resistance of thermally treated woods to Nasutitermes corniger in a food preference test
27. M.A.D.R. Pereira, A.L. Beraldo, Bambu de Corpo e Alma, Canal 6, Bauru, 2007.
28. Propriedades físicas da madeira de Pinus elliottii var. elliottii termorretificada sob diferentes atmosferas
29. Avaliação da termorretificação sobre a colagem na madeira de Eucalyptus saligna e Pinus caribaea var. Hondurensis
30. Effects of torrefaction on energy properties of Eucaliyptus grandis wood
31. Efeitos do tratamento preservativo e adesivo nas características mecânicas do laminado colado de duas espécies de bambu
32. Stell · 1980
33. Tratamento preservativo de duas espécies de bambu por imersão prolongada e Boucherie modificado10.1590/2179-8087.032113 ↗
34. Resistência de duas espécies de bambu tratadas contra fungos xilófagos10.1590/0100-67622015000300018 ↗
35. Resistência de duas espécies de bambu tratadas com CCB contra cupins e coleópteros xilófagos10.5902/1980509818462 ↗
36. Engineered bamboo for structural applications10.1016/j.conbuildmat.2015.01.077 ↗