Enhancing the flexural behaviour of masonry wallet using PP band and steel wire mesh
Source abstract
Abstract
Abstract The collapse of the masonry wall occurs mainly due to inadequacy of load transferring mechanism of out-of-plane behaving wall during earthquake, and is the cause for huge loss of property and life of inhabitants. Hence, an experimental program was carried out to investigate the efficiency of masonry wall in flexural loading. Total 32 specimens were tested. Some specimens were unreinforced and others were reinforced. In India, both clay brick and fly-ash brick are commonly used to construct the masonry wallets. Hence, these walls, were tested under four-point loading method as per ASTM E518 -10 recommendations to investigate the influence of different brick composition in out-of-plane behaviour of wall. In addition, comparative study was also made between traditional full-size and half-scale bricks to check its suitability for the construction of scale-down models. Cost effective materials such as polypropylene (PP) band and steel wire mesh (WM) were used to strengthen these walls. The result shows that both the strengthening techniques are effective in delaying the collapse of the structure, also enhancing the flexural strength and ductility, and this paper presents these outcomes. This paper also presents the cracking load, load-displacement behaviour, stiffness and energy dissipation capacity. Finally, an analytical formulation has also been developed to validate the cracking load of the wall with experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Masonry and Concrete Structural Analysis · Building materials and conservation · Seismic Performance and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Mechanics of masonry in compression10.1061/(ASCE)0733-9445(1985)111:4(857) ↗
2. Strength and elasticity of brick masonry prisms and wallettes under compression10.1617/s11527-006-9141-9 ↗
3. flexural and bond strength of brick/lime mortar masonry
4. Stress-strain curves for brick masonry in biaxial compression10.1061/(ASCE)0733-9445(1992)118:6(1451) ↗
5. Experimental study on masonry infill material properties
6. Experimental and numerical investigations on material behaviour of brick masonry
7. Experimental determination of the mechanical properties of clay brick masonry
8. Flexural tensile strength of concrete block masonry10.1061/(ASCE)0733-9445(1988)114:1(50) ↗
9. P.B. Lourenço, J. Barros, Size effect on masonry subjected to out-of-plane loading, in: 12th int. brick/block masonry conference; 2000; 2:1085–1098.
10. Seismic behavior of masonry walls: modeling of hysteretic rules10.1061/(ASCE)0733-9445(1996)122:9(1048) ↗
11. Study on out-of-plane behaviour of unreinforced masonry strengthened with welded wire mesh and mortar10.1016/j.conbuildmat.2017.03.002 ↗
12. Strengthening of masonry walls against out-of-plane loads using fiber-reinforced polymer reinforcement10.1061/(ASCE)1090-0268(2004)8:1(79) ↗
13. Out-of-plane static and dynamic response of masonry panels10.1016/j.engstruct.2017.07.070 ↗
14. Out-of-plane seismic evaluation and retrofit of turn-of-the-century north American masonry walls10.1061/(ASCE)0733-9445(2001)127:5(561) ↗
15. Behavior and design aspects of FRP-strengthened URM walls under out-of-plane loading10.1061/(ASCE)CC.1943-5614.0000695 ↗
16. Out-of-plane bending of FRP-reinforced masonry walls10.1016/S0266-3538(98)00007-4 ↗
17. Strengthening of unreinforced masonry walls using FRPs10.1061/(ASCE)1090-0268(2001)5:2(76) ↗
18. Out-of-plane behaviour of infill masonry panels strengthened with composite materials10.1617/s11527-014-0384-6 ↗
19. Out-of-plane behaviour of unreinforced masonry brick walls strengthened with CFRP strips10.1016/j.conbuildmat.2012.04.058 ↗
20. Load capacity of concrete masonry block walls strengthened with epoxy-bonded GFRP sheets10.1177/0021998305051119 ↗
21. J.G.Tumialan, A. Morbin, F. Micelli, A. Nanni, Flexural strengthening of URM walls with FRP laminates, in: 3rd int. conf. on composites in infrastructure, Univ. of Arizona, Tucson, AZ; 2002.
22. Out-of-plane behaviour of unreinforced masonry strengthened using ferrocement overlay10.1617/s11527-014-0390-8 ↗
23. D. Quiun, P. Mamani, Cyclic load behavior of confined masonry walls of horizontally-hollow bricks retrofitted with wire meshes, in: 16th world conference on earthquake, Santiago Chil; 2017.
24. Failure of masonry structures in earthquake: A few simple cost effective techniques as possible solutions10.1016/j.engstruct.2015.10.014 ↗
25. A critical review of retrofitting methods for unreinforced masonry structures10.1016/j.ijdrr.2013.12.004 ↗
26. N. Sathiparan, M. Paola, K. Meguro, Parametric study on diagonal shear and out of plane behavior of masonry wallettes retrofitted by PP-band mesh, in: 14th WCEE Beijing, China; 2008.
27. S. Nayak, S.C. Dutta, Improving seismic performance of masonry structures with openings by polypropylene bands and L-shaped reinforcing bars, J. Performance Constr. Facilities 30(2), (2016), 04015003.10.1061/(ASCE)CF.1943-5509.0000733 ↗
28. Fiber Reinforced polymer and polypropylene composite retrofitting technique for masonry structures10.3390/polym7050963 ↗
29. IS 1077, Indian standard code of practice for common burnt clay building bricks specification 1992 (reaffirmed 2002) Bureau of Indian Standards New Delhi.
30. IS 1905, Indian standard code of practice for structural use of unreinforced masonry 1987 (reaffirmed 2002) Bureau of Indian Standards New Delhi.
31. IS 13757, Indian standard code of practice for burnt clay fly-ash building bricks-specification 1993 (reaffirmed 2007) Bureau of Indian Standards New Delhi.
32. E518/E518M-102010b, Standard test methods for flexural bond strength of masonry 2010 ASTM.
33. Field assessment of unreinforced masonry walls strengthened with fiber reinforced polymer laminates10.1061/(ASCE)0733-9445(2003)129:8(1047) ↗
34. Out-of-plane flexural behavior of unreinforced red brick walls strengthened with FRP composites10.1016/j.compositesb.2006.07.019 ↗
35. Out-of-plane behavior of URM arching walls with modern blast retrofits: experimental results and analytical model10.1061/(ASCE)0733-9445(2008)134:10(1589) ↗
36. IS 1893 (Part 1), Criteria for Earthquake Resistant Design of Structure 2016 Bureau of Indian Standards New Delhi.
37. CEN, Design of masonry structures. Part 1–1: General rules for buildings—Reinforced and unreinforced masonry, European Committee of Standardization, Brussels, Belgium, 1996.
38. P. Dayaratnam, Brick and reinforced brick structures, Oxford and IBH (1987) New Delhi, India.
39. Compressive properties of structural clay tile prisms10.1061/(ASCE)0733-9445(1997)123:7(920) ↗
40. Stress-strain characteristics of clay brick masonry under uniaxial compression10.1061/(ASCE)0899-1561(2007)19:9(728) ↗
41. Characteristic compressive strength of brickwork walls from collected test results
42. FEMA 306, Evaluation of earthquake damaged concrete and masonry wall buildings, basic procedures manual 1999 Federal Emergency Management Agency Calif.
43. International Code Council, International building code 2003Va.
44. MSJC, Building code requirements for masonry structures, ACI 530-02/ASCE 5-02/TMS 402-02, American Concrete Institute, Structural Engineering Institute of the American Society of Civil Engineers, The Masonry Society, Detroit, 2002.
45. Paulay · 1992
46. FRP strengthening of UMR walls subject to out-of-plane loads
47. Design guidelines for masonry structures: Out of plane loads
48. ACI, Guide for the design and construction of externally bonded fiber-reinforced polymer systems for strengthening unreinforced masonry structures, ACI 440.7R-10, Farmington Hills, MI, 2010.