journal article·2019-06

Correlations between air permeability coefficients and pore structure indicators of cementitious materials

Yuya Sakai

Publisher page

Abstract

Correlations between the air permeability coefficient and various pore structure indicators in cementitious materials were examined to determine the pore structure indicator that best evaluated air permeability using data from previous studies of air permeabilities and pore structures. The determination coefficients of air permeability with total pore volume, critical pore diameter, and ordinary threshold pore diameter were low, although these have often been used as indicators. The median and threshold pore diameters obtained by percolation theory showed high determination coefficients. The equation using the threshold pore diameter better estimated the air permeability coefficient than the Katz–Thompson equation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Asphalt Pavement Performance Evaluation · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Studies on forecasting of carbonation depth of slag high performance concrete considering gas permeability10.1016/j.clay.2013.02.020 ↗
2. Assessing concrete carbonation resistance through air permeability measurements10.1016/j.conbuildmat.2015.02.075 ↗
3. Determination of chloride diffusion coefficient and gas permeability of concrete and their relationship10.1016/S0008-8846(96)85015-0 ↗
4. The importance of gas permeability in addition to the compressive strength of concrete10.1680/macr.2000.52.1.1 ↗
5. Air and water permeabilities of coal ash and Portland cement mortars
6. Importance of curing on concrete structures
7. An experimental study on the permeability coefficient influencing to carbonation of mortar and concrete
8. Relationship between drying shrinkage and air permeability coefficient of concrete
9. Influence of coarse aggregate on the permeation, durability and the microstructure characteristics of ordinary Portland cement concrete10.1016/j.conbuildmat.2005.02.022 ↗
10. Estimating the permeability of cement pastes and mortars using image analysis and effective medium theory10.1016/j.cemconres.2011.11.018 ↗
11. Influences of secondary wet curing on strength, durability and microstructure of steam cured mortar10.14250/cement.70.405 ↗
12. Durability assessment of blended concrete by air permeability10.1186/s40069-018-0260-9 ↗
13. Mercury porosimetry: an inappropriate method for the measurement of pore size distributions in cement-based materials10.1016/S0008-8846(00)00370-7 ↗
14. Influence of mix proportions on microstructure and gas permeability of cement pastes and mortars10.1016/j.cemconres.2011.11.019 ↗
15. Study on the correlation between SHPC pore structure and air permeability
16. The effect of clinker and limestone quality on the gas permeability, water absorption and pore structure of limestone cement concrete10.1016/S0958-9465(98)00037-7 ↗
17. Relationship between compression strength, air permeability and pore structure of cementitious material with various replacement ratio of blast furnace slag
18. Establishment and validation of an indicator of pore structure that governs mass transport in concrete
19. Evaluation of the Katz-Thompson model for estimating the water permeability of cement-based materials from mercury intrusion porosimetry data10.1016/0008-8846(94)90131-7 ↗
20. Using pore parameters to estimate permeability or conductivity of concrete10.1617/s11527-006-9212-y ↗
21. Permeability, diffusivity, and microstructural parameters: A critical review10.1016/0008-8846(90)90101-3 ↗
22. Relationships between permeability porosity, diffusion and microstructure of cement pastes, mortar, and concrete at different temperatures10.1557/PROC-137-179 ↗
23. Mercury intrusion porosimetry in concrete technology: tips in measurement, pore structure parameter acquisition and application10.1007/s10934-013-9765-4 ↗
24. Mindess · 2003
25. Y. Sakai, C. Nakamura, T. Kishi, Threshold pore radius of concrete obtained with two novel methods, in: D. Bjegović, H. Beushausen, M. Serdar (Eds.), RILEM International workshop on performance-based specification and control of concrete durability, Zagreb, Croatia, 2014.
26. Critical density in percolation processes10.1063/1.1674565 ↗
27. Percolation of phases in a three-dimensional cement paste microstructural model10.1016/0008-8846(91)90014-9 ↗
28. Carman · 1956
29. Study on change of air permeability coefficient due to drying
30. Quantitative prediction of permeability in porous rock10.1103/PhysRevB.34.8179 ↗
31. Prediction of rock electrical conductivity from mercury injection measurements10.1029/JB092iB01p00599 ↗
32. The microgeometry and transport properties of sedimentary rock10.1080/00018738700101062 ↗
33. Comparison of measured and calculated permeabilities for hardened cement pastes10.1016/0008-8846(96)00130-5 ↗
34. The effect of air entraining agent to pore size distribution and air permeability of hardened cement paste
35. Pore structure and permeation characteristics of foamed concrete10.3151/jact.12.535 ↗
36. Effect of pore structure of high-fluidity concrete to air and water permeabilities
37. Pore structure of middle scale column specimens exposed outdoors
38. Taguchi · 2014
39. Study on improving the durability of concrete by drainage and underwater curing, report of Taisei
40. Assessment of the durability of concrete from its permeation properties: a review10.1016/S0950-0618(00)00058-1 ↗
41. Numerical study on the relationship among air permeability, pore size and pressure assuming molecular and viscous flows10.3151/jact.15.103 ↗
42. Effect of curing conditions on the capillary porosity of hardened Portland cement pastes10.1111/j.1151-2916.1976.tb09380.x ↗
43. Electrical conductivity and chloride ingress in hardened cement paste10.3151/jact.14.87 ↗
44. Ollivier · 2012